From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hamish Moffatt Subject: Re: soundmodem won't decode 300 baud signals? Date: Thu, 3 Aug 2006 08:39:41 +1000 Message-ID: <20060802223941.GA30169@cloud.net.au> References: <44D0BC51.6050709@gmail.com> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <44D0BC51.6050709@gmail.com> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hams@vger.kernel.org On Wed, Aug 02, 2006 at 10:53:05AM -0400, Joe Veldhuis wrote: > There was a very similar question posted here back in November 2005 > which never got an answer, so I guess I will have to ask again. I've > been trying to receive 300 baud packet signals via HF with soundmodem, > and have had no luck thus far. I have a channel configured with these > settings on the Demodulator tab: > [..] > When receiving a signal, the diagnostic screen shows that the modem is > just detecting a solid string of '1's. The app seems to be able to > decode 300 baud packets sent over FM from another computer running > soundmodem with the same settings. > > Is this supposed to work? If so, what am I doing wrong? At a glance at the source code, 300 baud isn't supported, so I don't know how you got 300 baud from another computer to be detected. Was that running soundmodem also, or some other implementation? Hamish -- Hamish Moffatt VK3SB