From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pino Zollo Subject: DBLog 0.9.2 Date: Wed, 16 Apr 2008 15:07:52 -0400 Message-ID: <200804161507.56441.pinozollo@gmail.com> Reply-To: pinozollo@gmail.com Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:reply-to:organization:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=C7pY/NiFjRWq/ILsJvAG68JiXV3Rk1BwstXzQ/08/Qg=; b=FGiZ5tUTWpLxp5t624nD2G1leKWY2M92WSghOUsfCTP4YyySPcH7A25ZNVaaCxfI6KglPiLf1cF6D6wa0iSIxpntfG6okRLNlt2jHTxBz9GFqoTQsDGtXPHDSaNWvLo9WQJN+ub6RzriVi6t2I78uFOcRIluJqeeMxBvezc0LgE= Content-Disposition: inline Sender: linux-hams-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" To: Yahoo linux hams , pa0r , "Marco Di Martino (IW2OHX)" , Linux Hams , Joop Stakenborg The new version of DBLog, the 0.9.2 is available on http://www.qsl.net/zp4kfx/Linux Now DBLog uses rigctld daemon from hamlib 1.2.7 to read and set frequency an modes of the radio. This allows the use of all hamlib supported radios. DBLog is written in GAMBAS (2) and distributed in source code under the GPL licence. It stores all the data in a RDBM: PostgreSQL is used in the development, but MySQL, QSLite3 and Firebird should work too. DBLog receives cluster spots from xdx, checks them against local statistics and shows the results in a dedicated window. Clicking on a spot sets the radio RX frequency and eventually the split TX one. Can transmit CW using cwdaemon. An azimuthal map centred on the QTH is available via xplanet, showing also the position of the other station. A Screeshot is available on the downloading page. Comments and bug reports are aways welcome. 73 de Pino ZP4KFX