From mboxrd@z Thu Jan  1 00:00:00 1970
From: Nate Bargmann <n0nb@n0nb.us>
Subject: Re: gMFSK ?
Date: Tue, 8 Jul 2008 16:34:00 -0500
Message-ID: <20080708213400.GN8136@n0nb.us>
References: <4873C64E.2000105@mail.tele.dk>
Mime-Version: 1.0
Return-path: <linux-hams-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <4873C64E.2000105@mail.tele.dk>
Sender: linux-hams-owner@vger.kernel.org
List-ID: <linux-hams.vger.kernel.org>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-hams <linux-hams@vger.kernel.org>

* Erik Jakobsen <erik_ja@mail.tele.dk> [2008 Jul 08 15:07 -0500]:
> Hi.
>
> I have installed gMFSK on my openSUSE 11.0.
>
> It works nice, and now I want to set up hamlib.
>
> I have tested the connection to the scanport with rigctl and the command IF:
>
> # rigctl -vvvvv -r /dev/ttyS0 -s 9600 -m 204
> rigctl, Hamlib version 1.2.7.1
> Report bugs to <hamlib-developer@lists.sourceforge.net>
>
> rig:rig_init called
> rig: loading backend kenwood
> kenwood: _init called
> rig_register (213)
> rig_register (201)
> rig_register (225)
> rig_register (203)
> rig_register (204)
> rig_register (216)
> rig_register (224)
> rig_register (205)
> rig_register (207)
> rig_register (209)
> rig_register (210)
> rig_register (222)
> rig_register (214)
> rig_register (221)
> rig_register (202)
> rig_register (211)
> rig_register (206)
> rig_register (208)
> rig_register (215)
> rig_register (226)
> rig_register (217)
> rig_register (220)
> rig_register (223)
> rig_register (227)
> rig_register (228)
> rig:rig_open called
> TX 3 bytes
> 0000     49 46 3b       IF;
> RX 38 characters
> 0000     49 46 30 30 30 31 34 30 38 30 37 38 30 20 20 20         
> IF00014080780
> 0010     20 20 20 30 30 39 30 30 30 20 39 30 30 32 30 30            
> 009000 900200
> 0020     30 30 30 38 20 3b                                      0008 ;
> Opened rig model 204, 'TS-570D'
> Backend version: 0.6.1, Status: Stable
>
> Rig command: if

This is actually two rigctl commands, i: get_split_freq  () and 
f: get_freq        ()  and should not be confused with the IF; command
sent to the radio.  When you enter a ? at the Rig command: prompt, you
will see a list of commands rigctl accepts.  

> TX 3 bytes
> 0000     49 46 3b       IF;
> RX 38 characters
> 0000     49 46 30 30 30 31 34 30 38 30 37 38 30 20 20 20         
> IF00014080780
> 0010     20 20 20 30 30 39 30 30 30 20 39 30 30 32 30 30            
> 009000 900200
> 0020     30 30 30 38 20 3b                                      0008 ;
> TX 4 bytes
> 0000     46 52 30 3b    FR0;
> TX 4 bytes
> 0000     46 54 30 3b    FT0;
> Tx frequency: 14080780
>
> TX 3 bytes
> 0000     49 46 3b       IF;
> RX 38 characters
> 0000     49 46 30 30 30 31 34 30 38 30 37 38 30 20 20 20         
> IF00014080780
> 0010     20 20 20 30 30 39 30 30 30 20 39 30 30 32 30 30            
> 009000 900200
> 0020     30 30 30 38 20 3b                                      0008 ;
> Rig command: Frequency: 14080780
>
> Rig command:                                       
>
> In the gMFSK hamlib setup I have this:
>
> Kenwood TS570D
> Port /dev/ttyS0
> Speed 9600
>
> What more shal I have in here to get that part to work ?.

It has been a long time since I used gMFSK that I've forgotten how it
is configured.

> When I start up gMFSK it complains abot the port settings

You did exit rigctl before starting gMFSK, right?

> Hamlib init: rig_open failed: IO error
>
> What to do here ?

Perhaps you may wish to try Fldigi?  It is actively developed and seems
to be the successor to gMFSK.  See http://www.w1hkj.com

73, de Nate >>

-- 

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://n0nb.us/index.html