Re: 300bps Packet

[Phil <phillor@telstra.com>]

On Wed, 24 Nov 2010 10:38:27 pm John Goerzen wrote:
> On 11/24/2010 12:51 AM, Phil wrote:
> > On Tue, 23 Nov 2010 03:26:12 pm you wrote:

<cut>

> Hi Phil,
> 
> That's good to know, but I must admit I don't know how to make it work.
>   Can you elaborate on what parameters you tuned, and how you found the
> appropriate values for them?  Maybe even a copy of your config file?
> 

Hello again John,

The following is from the HF section of my soundmodem config file. It's been 
awhile since I've played with 300 baud packet but I just tried the call 
function and it still generates the familiar 300 baud tones.

[phil@localhost ax25]$ more soundmodem.conf
<?xml version="1.0"?>
<modem>
  <configuration name="hf_packet">
    <channel name="Channel 0">
      <mod mode="afsk" bps="300" f0="900" f1="1100" diffenc="1"/>
      <demod mode="afsk" bps="300" f0="900" f1="1100" diffdec="1"/>
      <pkt mode="MKISS" ifname="sm0" hwaddr="VK4BVM-2" ip="10.0.0.1" 
netmask="255.255.255
.0" broadcast="10.0.0.255"/>

-- 
Regards,
Phil