Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
From: "gel2256@dnaco" <gelmce@dnaco.net>
To: "Toussaint OTTAVI (TK1BI)" <t_ottavi@club-internet.fr>
Cc: linux-hams <linux-hams@vger.kernel.org>
Subject: Re: 802.11b wireless lan equipment and ham radio ?
Date: Wed, 01 May 2002 13:30:01 -0400	[thread overview]
Message-ID: <3CD02619.F9158EB3@dnaco.net> (raw)
In-Reply-To: 3CCFCFEF.2385E8F4@club-internet.fr

Hi, Toussaint:

 Yes, maybe. ;-)

It is exciting to have 11 megabit data radios for $80 - $120 US !

 In the USA, the Amateur band segment is 2390-2450.
In the 802.11b cards sold in/for USA, channels
1 through 6 fall within that Amateur Radio segment.

 Perhaps there are some Amateur Radio operators
working for an 802.11b manufacturer that would create
firmware data that could be flashed into the card(s) that
would put them inside the Amateur Radio bands of all/any
countries with 2.4 GHz emission authorizations.

OBTW, Isn't 2.4 GHz UHF, rather than SHF? ;-)

Station ID via the 'Pattern function of 'ping':
ping -f -i 600 -p <## ## ## ## ## ## ## ## ## ##>
                   20 44 45 20 4E 43 38 51 20 20
                       D  E     N  C  8  Q

HTH, Chuck

"Toussaint OTTAVI (TK1BI)" wrote:
> 
> Hi list,
> 
> A few days ago, I saw a message about configuring a 802.11b network
> adapter under Linux.
> 
> For those who don't know, 802.11b (also called 'WiFi') is a wireless lan
> protocol, to connect 'remote' computers to Ethernet networks via a
> radio link. 802.11b equipments (network adapters, access points, bridges)
> are becoming more and more popular, and prices are very affordable.
> 
> These equipments are using freqencies over 2400 MHz. The exact
> frequency coverage depends on country regulations, ie in France, only
> 4 channels are allowed, around 2450 to 2480 (not sure about the exact
> values). Maximum throughput is 11 Mbits with high efficiency modulation
> techniques.
> 
> PURPOSE:
> --------
> 
> Does someone think it would be technically possible to modify the
> radio part of such a network adapter, in order to work on the amateur
> radio 2.4 GHz frequencies (2350-2400) ?
> 
> I presume this is not so easy ;-) This would anyway allow great
> capabilities for high rate TCP/IP packet-radio links for affordable
> prices.
> 
> Could some specialists of SHF and/or digital modulation techniques give
> us their point of view about the feasibility of such modifications on
> commercial 802.11b equipments ?
> 
> (sorry for my poor english which may be inaccurate ;-)
> 
> Thanks for comments & best 73,
> Toussaint.
> 
> --
>  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>  Toussaint OTTAVI (TK1BI)            WWW   : http://kalliste.fr.fm
>  Phone : (+33) 6.10.28.41.72 (GSM)   Email : t_ottavi@club-internet.fr
>  Mail  : B.P. 223, F-20179 AJACCIO   Packet: TK1BI@TK5KP.FCOR.FRA.EU
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2002-05-01 17:30 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-05-01 11:22 802.11b wireless lan equipment and ham radio ? Toussaint OTTAVI (TK1BI)
2002-05-01 17:30 ` gel2256@dnaco [this message]
2002-05-01 18:47 ` Henk Remijn
  -- strict thread matches above, loose matches on Subject: below --
2002-05-01 17:43 Jack Zielke
2002-05-01 22:51 Jack Zielke
2002-05-01 23:47 ` Matti Aarnio
2002-05-02  0:33   ` James Cutler
2002-05-02  7:30     ` Matti Aarnio
2002-05-02  1:32 ` Stephan Greene
2002-07-08 20:22 Steve Lampereur
2002-07-09  4:34 ` Craig Small
2002-07-13 20:01 ` Chuck Gelm
2002-07-13 15:28 Steve Lampereur
2002-07-16 15:16 Steve Lampereur
2002-07-16 18:24 ` Riley Williams
2002-07-16 22:37 ` Hamish Moffatt
2002-07-17 16:51   ` Jason Flynn G7OCD
2002-07-17 21:04 Steve Lampereur
2002-07-18  6:40 ` Jason Flynn G7OCD
     [not found]   ` <000501c22e88$05691d40$14000a0a@p75>
2002-07-18 18:40     ` Jason Flynn G7OCD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3CD02619.F9158EB3@dnaco.net \
    --to=gelmce@dnaco.net \
    --cc=linux-hams@vger.kernel.org \
    --cc=nc8q@gelm.net \
    --cc=t_ottavi@club-internet.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox