From: Jason Flynn G7OCD <jason.flynn@btinternet.com>
To: Milan <milank@merck.cz>
Cc: linux-hams@vger.kernel.org
Subject: Re: Using Kenwood D7 with Linux AX.25
Date: Mon, 05 Aug 2002 07:39:04 +0100 [thread overview]
Message-ID: <3D4E1D88.1050904@btinternet.com> (raw)
In-Reply-To: 3D4E100E.4020702@merck.cz
Milan wrote:
> last week, I bought the TH-D7E(G) with the new firmware (v. 2).
> I succeeded to configure it with mkiss and kissattach (no success with
> kissattach alone), RX and TX functional on 9k6.
For a short while.... Depends what you're sending. Try some IP... you
might be lucky with a telnet for a bit but after the TCP seq number
rolls around a bit then it will lock up. Try an FTP with plenty of
KISS octets with the top bit set and it will lock much sooner..
> Small problem - it just receives two frames at once, the third one is
> rejected.
Sounds about right..
Look people, just give up on this... IT DONT WORK ! and as
M Taylor wrote, go read my previous post on why.
73
Jason
prev parent reply other threads:[~2002-08-05 6:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-03 2:24 Using Kenwood D7 with Linux AX.25 John Ackermann N8UR
2002-08-05 5:41 ` Milan
2002-08-05 6:39 ` Jason Flynn G7OCD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D4E1D88.1050904@btinternet.com \
--to=jason.flynn@btinternet.com \
--cc=linux-hams@vger.kernel.org \
--cc=milank@merck.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox