Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
From: Bill Walton <kj6eo@kj6eo.com>
To: LINUX HAMS MAILING LIST <linux-hams@vger.kernel.org>
Subject: nrattach "Cannot find free NET/ROM device" error!
Date: Wed, 02 Oct 2002 13:31:26 -0700	[thread overview]
Message-ID: <3D9B579E.A91FC4A3@kj6eo.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 918 bytes --]

Hello -

I am still having some difficulties regarding getting my NETROM device "nr0"
attached.  The instructions are simple:

Edit "nrports" file

Edit "nrbroadcast" file

Run "nrattach netrom" to create the device "nr0"

Sounds easy but it doesn't work.  Here is what I get when I enter in the
"nrattach netrom" command:

nrattach: SIOCGIFFLAGS: no such device
nrattach: cannot find free NET/ROM device

Copies of the following files are attached:

axports
nrports
nrbroadcast
rc.local
output (from ifconfig command)

Any help that you could offer would be appreciated!  I am running RedHat 7.2 with
the 2.4.18 kernel (ax25 enabled, libs,tools, apps all installed).  Am I making an error
in these simple files? or is there a greater evil lurking somewhere?  I will be running 7
or 8 ports in the finished configuration.  But for now I am just trying to get it all to
work in its simplest form.

Regards,

Bill KJ6EO

[-- Attachment #2: output --]
[-- Type: text/plain, Size: 1499 bytes --]

ax0       Link encap:AMPR AX.25  HWaddr KJ6EO-15  
          inet addr:44.16.2.102  Mask:255.0.0.0
          UP RUNNING  MTU:256  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth0      Link encap:Ethernet  HWaddr 00:04:5A:76:37:16  
          inet addr:64.174.110.108  Bcast:64.174.110.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1101 errors:0 dropped:0 overruns:0 frame:0
          TX packets:314 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:119405 (116.6 Kb)  TX bytes:37380 (36.5 Kb)

eth1      Link encap:Ethernet  HWaddr 00:50:BA:C0:54:A8  
          inet addr:192.168.1.3  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:471 errors:0 dropped:0 overruns:0 frame:0
          TX packets:478 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:61992 (60.5 Kb)  TX bytes:84023 (82.0 Kb)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:90 errors:0 dropped:0 overruns:0 frame:0
          TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:6887 (6.7 Kb)  TX bytes:6887 (6.7 Kb)


[-- Attachment #3: nrbroadcast --]
[-- Type: text/plain, Size: 126 bytes --]

# /etc/ax25/nrbroadcast
#
# The format of this file is:
#
# ax25_name min_obs def_qual worst_qual verbose
#
radio	1	192	100	1

[-- Attachment #4: nrports --]
[-- Type: text/plain, Size: 144 bytes --]

# /etc/ax25/nrports
#
# The format of this file is:
#
# name callsign alias paclen description
#
netrom  KJ6EO-7	SCV   236    Linux Switch Port

[-- Attachment #5: axports --]
[-- Type: text/plain, Size: 149 bytes --]

# /etc/ax25/axports
#
# The format of this file is:
#
# name callsign speed paclen window description
#
radio	KJ6EO-15	4800	256	2	145.050 1200 Baud


[-- Attachment #6: rc.local --]
[-- Type: application/x-unknown-content-type-local_auto_file, Size: 548 bytes --]

             reply	other threads:[~2002-10-02 20:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-10-02 20:31 Bill Walton [this message]
2002-10-02 20:54 ` nrattach "Cannot find free NET/ROM device" error! Tomi Manninen
2002-10-02 21:29   ` Bill Walton
2002-10-02 21:03 ` pa3gcu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3D9B579E.A91FC4A3@kj6eo.com \
    --to=kj6eo@kj6eo.com \
    --cc=linux-hams@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox