From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ray Wells" Subject: Re: Configuring AX25 NET/ROM! Date: Fri, 04 Oct 2002 07:29:00 +1000 Sender: linux-hams-owner@vger.kernel.org Message-ID: <3D9D433C.16340.6EE2FB@localhost> References: <3D9CADD2.96171596@kj6eo.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7BIT Return-path: In-reply-to: <3D9CADD2.96171596@kj6eo.com> Content-description: Mail message body List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-hams@vger.kernel.org Hi Bill, I'm old (ish) and grey (where I still have hair!) and I'm still asking questions about Linux after five years :-) Ray Wells VK2TV Date sent: Thu, 03 Oct 2002 13:51:30 -0700 From: Bill Walton To: LINUX HAMS MAILING LIST Subject: Configuring AX25 NET/ROM! > Dear Linux-Hams Mailing List: > > First of all I would like to thank you for your excellent advice > regarding my AX25 NET/ROM configuration issues. Most of my problems > are caused by my lack of experience with Linux. Hopefully some day > when I am old and gray I will be answering linux questions instead of > asking them (>: > > I have basicially got everything running now but I have screwed up the > NET/ROM configuration somewhere and the node is not working properly. > For my particular setup I do not need AXIP or ROSE. Once that I can > get one port (ax0) working correctly I should be able to configure the > other 5 ports. > > I can make "call" requests on "ax0" that seems to work fine. However, > when I try to connect to SCV:KJ6EO-7 I get connected then get > immediately disconnected. Also the node ignores its alias "SCV". > > I humbly request that someone take a look at my configuration files > and correct the mistakes that I have made. It might be enough if > someone would supply me with copies of their files that correspond to > mine. Once I get the NET/ROM issues straightened out I can go on to > my next BIG HEADACHE which is XFBB. I can't get it to run...I get the > "Unknown Return Value 127" error (whatever that means). Again that > error is probably due to some mistake I have made somewhere. > > The following files are attached: > > axports, nrports, nrbroadcast, output (from ifconfig), ax25d.conf, > node.conf, node.perms. > > Your help and advice are always appreciated! > > Regards, > > Bill KJ6EO >