Problems with uscc and kernel 2.6.0-test11

Problems with uscc and kernel 2.6.0-test11

[David Quental]

Hello to all.

I have on uscc at address 320 and irq 5, it works fine under kernel 
2.4.21-144 from SuSE 9.0. But under kernel 2.6.0-test11 i have problem 
when try to load it, shell freezes and if i do command 'ifconfig' in 
another shell it freezes as well. Since first kernel 2.6.0 i have 
problems with my uscc, never worked because of those freezes.
Any help will be fine.
Another thing:
in kernel 2.6.0-test11 i use same .config than in SuSE.

Best 73 till then.

CT1DRB
David Quental

Re : Problems with uscc and kernel 2.6.0-test11

[Jean-Luc Coulon (f5ibh)]

[-- Attachment #1: Type: text/plain, Size: 1476 bytes --]

Hello,

I've the same problem with a DRSI ISA card. it uses the scc driver.
With previous versions (I've tried -test2), sccinit was unable to  
found the control ports of the card (was telling "Missing"). With  
test 11, the driver seems to initialise fine

kernel: NET: Registered protocol family 3
kernel: AX.25: Z8530 SCC driver version 3.0.dl1bke
kernel: scc0: data port = 0x303  control port = 0x302 -- found
kernel: scc1: data port = 0x301  control port = 0x300 -- found

The the shell is dead. An other shell where I start listen dies too.
The related process are not killable...

I'm running DEbian sid.
--
Ragards and 73
			- Jean-Luc

Le 11.12.2003 16:43, David Quental a écrit :
> Hello to all.
> 
> I have on uscc at address 320 and irq 5, it works fine under kernel  
> 2.4.21-144 from SuSE 9.0. But under kernel 2.6.0-test11 i have  
> problem when try to load it, shell freezes and if i do command  
> 'ifconfig' in another shell it freezes as well. Since first kernel  
> 2.6.0 i have problems with my uscc, never worked because of those  
> freezes.
> Any help will be fine.
> Another thing:
> in kernel 2.6.0-test11 i use same .config than in SuSE.
> 
> Best 73 till then.
> 
> CT1DRB
> David Quental
> 
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux- 
> hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: Re : Problems with uscc and kernel 2.6.0-test11

[David Quental]

Hello Jean-Luc.

Yes, here it is the same. shells are dead but aparently modem is 
initialized but nothing more. Lets wait.

Best regards and best 73.

CT1DRB
David Quental

> Hello,
>
> I've the same problem with a DRSI ISA card. it uses the scc driver.
> With previous versions (I've tried -test2), sccinit was unable to  
> found the control ports of the card (was telling "Missing"). With  
> test 11, the driver seems to initialise fine
>
> kernel: NET: Registered protocol family 3
> kernel: AX.25: Z8530 SCC driver version 3.0.dl1bke
> kernel: scc0: data port = 0x303  control port = 0x302 -- found
> kernel: scc1: data port = 0x301  control port = 0x300 -- found
>
> The the shell is dead. An other shell where I start listen dies too.
> The related process are not killable...
>
> I'm running DEbian sid.
> -- 
> Ragards and 73
>             - Jean-Luc
>
> Le 11.12.2003 16:43, David Quental a écrit :
>
>> Hello to all.
>>
>> I have on uscc at address 320 and irq 5, it works fine under kernel  
>> 2.4.21-144 from SuSE 9.0. But under kernel 2.6.0-test11 i have  
>> problem when try to load it, shell freezes and if i do command  
>> 'ifconfig' in another shell it freezes as well. Since first kernel  
>> 2.6.0 i have problems with my uscc, never worked because of those  
>> freezes.
>> Any help will be fine.
>> Another thing:
>> in kernel 2.6.0-test11 i use same .config than in SuSE.
>>
>> Best 73 till then.
>>
>> CT1DRB
>> David Quental
>>
>>
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux- 
>> hams" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.ht
>
> ml



-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Re : Problems with uscc and kernel 2.6.0-test11

[Jeroen Vreeken]

On 2003.12.11 17:14:21 +0100 David Quental wrote:
> Hello Jean-Luc.
> 
> Yes, here it is the same. shells are dead but aparently modem is 
> initialized but nothing more. Lets wait.
> 
> Best regards and best 73.

I have a system running with an scc card.
I did fix some additional bugs in ax.25, but don't remember if I did
anything with the scc card :) If the system survives the weekend I'll post
a patch (and look at what exactly changed over the last few weeks)

Jeroen

Re: Re : Problems with uscc and kernel 2.6.0-test11

[David Quental]

Jeroen Vreeken wrote:

>On 2003.12.11 17:14:21 +0100 David Quental wrote:
>  
>
>>Hello Jean-Luc.
>>
>>Yes, here it is the same. shells are dead but aparently modem is 
>>initialized but nothing more. Lets wait.
>>
>>Best regards and best 73.
>>    
>>
>
>I have a system running with an scc card.
>I did fix some additional bugs in ax.25, but don't remember if I did
>anything with the scc card :) If the system survives the weekend I'll post
>a patch (and look at what exactly changed over the last few weeks)
>
>Jeroen
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-hams" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>  
>
Ok Jeroen.
Tks, i will wait for a positive test from your side during next weekend.

Best 73 and till then.

CT1DRB
David Quental