From: Andrea Borgia <borgia@cs.unibo.it>
To: linux-hams@vger.kernel.org
Subject: Re: problems with soundmodem (userspace)
Date: Tue, 15 Jun 2004 16:57:38 +0200 [thread overview]
Message-ID: <40CF0E62.3070500@cs.unibo.it> (raw)
In-Reply-To: <40C5F2A5.8010603@alumni.ethz.ch>
[-- Attachment #1: Type: text/plain, Size: 1778 bytes --]
Thomas Sailer wrote:
> I've put a soundmodem version with a rather experimental native Alsa API
> on http://www.baycom.org/~tom/ham/soundmodem/soundmodem-0.9.tar.gz
I am having the same problem with rx packets being lost so I gave this
version a try. Now RX is apparently fine, but on the first TX packet the
soundmodem crashes with the following output:
-cut-cut-
ALSA lib pcm_hw.c:494:(snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed:
Broken pipe
sm[21164]: snd_pcm_start: Broken pipeALSA lib
pcm_hw.c:494:(snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: File
descriptor in bad state
sm[21164]: snd_pcm_start: File descriptor in bad statesm[21164]: audio:
snd_pcm_readi: Broken pipec
-cut-cut-
I tried using something else than hw:0,0 but it either results in a
config error or in a similar crash. Here is the relevant info about my
Alsa setup, is there any obvious mistake in the config?
/proc/asound/cards:
0 [V8235 ]: VIA8233 - VIA 8235
VIA 8235 at 0x1400, irq 9
/proc/asound/devices:
0: [0- 0]: ctl
17: [0- 1]: digital audio playback
25: [0- 1]: digital audio capture
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
33: : timer
/proc/asound/pcm:
0-00: VIA 8235 : VIA 8235 : playback 4 : capture 1
00-01: VIA 8235 : VIA 8235 : playback 1 : capture 1
/proc/asound/version:
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30
08:19:30 2004 UTC).
Compiled on Jun 12 2004 for kernel 2.6.6clarisse.
B73,
Andrea.
--
Homepage: http://andrea.borgia.bo.it / Amateur radio: IZ4FHT
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
[-- Attachment #2: soundmodem.conf --]
[-- Type: text/xml, Size: 589 bytes --]
<?xml version="1.0"?>
<modem>
<configuration name="Packet">
<channel name="Channel 0">
<mod mode="afsk" bps="1200" f0="1200" f1="2200" diffenc="1"/>
<demod mode="afsk" bps="1200" f0="1200" f1="2200" diffdec="1"/>
<pkt mode="MKISS" ifname="sm0" hwaddr="IZ4FHT-1" ip="192.168.10.2" netmask="255.255.255.0" broadcast="192.168.10.255"/>
</channel>
<chaccess txdelay="500" slottime="100" ppersist="40" fulldup="0" txtail="10"/>
<audio type="alsa" device="hw:0,1" halfdup="1" capturechannelmode="Left"/>
<ptt file="/dev/ptt"/>
</configuration>
</modem>
next prev parent reply other threads:[~2004-06-15 14:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-07 20:22 problems with soundmodem (userspace) Jochen Schaeuble
2004-06-07 20:36 ` Dave Platt
2004-06-08 17:08 ` Thomas Sailer
2004-06-15 14:57 ` Andrea Borgia [this message]
2004-06-08 20:26 ` Jochen Schaeuble
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40CF0E62.3070500@cs.unibo.it \
--to=borgia@cs.unibo.it \
--cc=linux-hams@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox