From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Stearn Subject: Re: Filter for 430Mhz Date: Tue, 09 Aug 2005 22:25:36 +0100 Message-ID: <42F91F50.9090509@rns-stearn.demon.co.uk> References: <200508092151.57245.stephen@g6dzj.demon.co.uk> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200508092151.57245.stephen@g6dzj.demon.co.uk> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: Linux Hams Stephen Kitchener wrote: > Hi, > > I have a problem with a really near 430Mz transmitter (my own) that is > breaking though to the TV. The Transmitter isn't off tune and as far as I > Know or can see, it isn't producing any side transmissions or birdies. > > So, My question is, does anyone know of a really good filter design or > commercial filer that will block 430.625 so that it dosn't appear in the > downlead to the TV. > > Thanks Try: http://www.ifwtech.co.uk/g3sek/swxfiltr/swxfiltr.htm Bottom of the page: UHF TV Bandpass Filter (432MHz reject) I use a 144MHz filter in the broadcast radio aerial and the 430MHz filter in the TV downlead. Then combine both downleads into a distribution amp. All the bits are fitted inside an old biscuit tin with clampon ferrites as feed-throughs. It is not perfect but does reduce the interference to an acceptable level, i.e. the rest of the family does not notice it. It is worth noting that digital TV is _much_ less tolerant of interference than the analogue system. -- 73 de g1sog Richard