From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Stearn Subject: Re: Document request - ROSE protocol specification Date: Wed, 14 Mar 2007 23:27:21 +0000 Message-ID: <45F884D9.2050500@rns-stearn.demon.co.uk> References: <45F87682.8010206@rns-stearn.demon.co.uk> <20070314223636.GK31960@vanheusden.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20070314223636.GK31960@vanheusden.com> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-hams@vger.kernel.org Folkert van Heusden wrote: > Would you please also consider integrating all this work into tcpdump? > Because as far as I know wireshark is for x11. You can build and run tshark which is the terminal version of wireshark. I have a patch for tcpdump that contains the changes to support: AX.25 AX.25 ARP Netrom Flexnet (such as it is) ROSE (such as it is) I will release that at the same time as the wireshark one. The full set of patches is: libpcap - for protocol 3 (AX.25) capture tcpdump wireshark I originally started by adding to tcpdump as it is a simpler system and I could then use the experience gained when porting to wireshark. -- Regards Richard