From: Lance Cotton <joe@lightningflash.net>
To: Doug <appld@sasktel.net>
Cc: linux-hams@vger.kernel.org
Subject: Re: BayPac BP-1 Modem and Linux
Date: Fri, 20 Jul 2007 21:34:27 -0500 [thread overview]
Message-ID: <46A170B3.60302@lightningflash.net> (raw)
In-Reply-To: <0JLI003UK9USAD00@bgmpomr1.sasknet.sk.ca>
Doug wrote:
> Is there anyway to connect a BayPac BP-1 modem to a linux system. I seem
> to find drivers
> for only the epp and usb variety. I need a modem to check my port
> configiration via the
> "LISTEN" command and I have run out unless I shut down the cluster and
> the bbs.
> Fbb is not loaded onto the system just yet. This is a new system (Mepis
> 6.5) and nothing
> else is loaded on to it yet except the ax25 stuff. The BP-1 is a serial
> device.
Do you have the kernel modules baycom_ser_fdx and/or baycom_ser_hdx ?
Those should be the kernel modules for baycom serial-port devices -- fdx
is full duplex and should work for all but the stubborn UARTs.
I don't have experience with the BP-1, but I have successfully loaded
the parallel-port PICPAR (Tiger BP-96 modem) with the kernel module
baycom_par
-Lance KJ5O
next prev parent reply other threads:[~2007-07-21 2:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-21 1:37 BayPac BP-1 Modem and Linux Doug
2007-07-21 2:34 ` Lance Cotton [this message]
2007-07-21 2:48 ` Bob Nielsen
2007-07-21 5:11 ` IT3 Stuart Blake Tener, USN
-- strict thread matches above, loose matches on Subject: below --
2007-07-21 16:06 Doug
2007-07-21 16:09 Doug
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46A170B3.60302@lightningflash.net \
--to=joe@lightningflash.net \
--cc=appld@sasktel.net \
--cc=linux-hams@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox