From mboxrd@z Thu Jan 1 00:00:00 1970 From: Erik Jakobsen Subject: Re: gMFSK ? Date: Wed, 09 Jul 2008 07:40:26 +0200 Message-ID: <48744F4A.60705@mail.tele.dk> References: <4873C64E.2000105@mail.tele.dk> <20080708213400.GN8136@n0nb.us> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080708213400.GN8136@n0nb.us> Sender: linux-hams-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-hams Nate Bargmann wrote: > This is actually two rigctl commands, i: get_split_freq () and > f: get_freq () and should not be confused with the IF; command > sent to the radio. When you enter a ? at the Rig command: prompt, you > will see a list of commands rigctl accepts. > > Ok about the ?. I have seen it. >> TX 3 bytes >> 0000 49 46 3b IF; >> RX 38 characters >> 0000 49 46 30 30 30 31 34 30 38 30 37 38 30 20 20 20 >> IF00014080780 >> 0010 20 20 20 30 30 39 30 30 30 20 39 30 30 32 30 30 >> 009000 900200 >> 0020 30 30 30 38 20 3b 0008 ; >> TX 4 bytes >> 0000 46 52 30 3b FR0; >> TX 4 bytes >> 0000 46 54 30 3b FT0; >> Tx frequency: 14080780 >> >> TX 3 bytes >> 0000 49 46 3b IF; >> RX 38 characters >> 0000 49 46 30 30 30 31 34 30 38 30 37 38 30 20 20 20 >> IF00014080780 >> 0010 20 20 20 30 30 39 30 30 30 20 39 30 30 32 30 30 >> 009000 900200 >> 0020 30 30 30 38 20 3b 0008 ; >> Rig command: Frequency: 14080780 >> >> Rig command: >> >> In the gMFSK hamlib setup I have this: >> >> Kenwood TS570D >> Port /dev/ttyS0 >> Speed 9600 >> >> What more shal I have in here to get that part to work ?. >> > > It has been a long time since I used gMFSK that I've forgotten how it > is configured. > > Ok np. >> When I start up gMFSK it complains abot the port settings >> > > You did exit rigctl before starting gMFSK, right? > > Yes I did. >> Hamlib init: rig_open failed: IO error >> >> What to do here ? >> > > Perhaps you may wish to try Fldigi? It is actively developed and seems > to be the successor to gMFSK. See http://www.w1hkj.com > > 73, de Nate >> > > Maybe I do Nate. I installed it an it's running. I have downloaded the TS570.xml file and have saved it into the /home/.fldigi folder. I entered the values to match what I prefer: /dev/ttyS0 9600 1 false 4 200 0 -12 false -12 false true I f I try to use RigCat, and check the ptt none, as I use a Signalink SL1+, the Rig at the bottom of the fldigi screen is greyed. Trying to use Hamlib, the Rig opens the RigControl, but I cannot control the tranceivers frequencies. As mentioned, I can get connected with rigctrl's commands. What am I missing ? 73 de Erik OZ4KK