From mboxrd@z Thu Jan 1 00:00:00 1970 From: Erik Jakobsen Subject: Re: gMFSK ? Date: Wed, 09 Jul 2008 16:37:32 +0200 Message-ID: <4874CD2C.3060905@mail.tele.dk> References: <4873C64E.2000105@mail.tele.dk> <20080708213400.GN8136@n0nb.us> <48744F4A.60705@mail.tele.dk> <48745CDB.8030009@mail.tele.dk> <48749367.8070701@mail.tele.dk> <20080709110558.GA4283@n0nb.us> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080709110558.GA4283@n0nb.us> Sender: linux-hams-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-hams@vger.kernel.org Nate Bargmann wrote: > > > Please go to http://groups.yahoo.com/group/linuxham/ and sign up for > that mailing list which is the support list for Fldigi. There are many > knowledgable members on that list including the Fldigi developers. > They can really help you. > > As one of the Hamlib developers, I'm puzzled why you're having a > problem. As Dave wrote, it could be an obscure setting. Looking at > the CVS source for the ts570.c I see that post_write_delay = 30 by > default. Since I work with Yaseu code, I'm not much help here either. > > Sometimes these things can be maddening as a lot of pieces must work > together perfectly. Don't give up and do just the linuxham group. > > HTH, > > 73, de Nate >> > > I'm now a member of the group. I have been inside the ts570.c too, and have edit the value to 50. But at that time I had not in mind, that I have installed openSUSE11.0. I used 10.3 before, and haven't installed th4e gcc :-( I will try to compile make make install again. Tnx Nate 73, Erik, OZ4KK