From: Chris Kantarjiev <cak@dimebank.com>
To: Chion Jacques <f6cwo@orange.fr>
Cc: linux-hams@vger.kernel.org
Subject: Re: funny kiss trace
Date: Fri, 28 Nov 2008 15:19:38 -0800 [thread overview]
Message-ID: <49307C8A.4090905@dimebank.com> (raw)
In-Reply-To: <26532428.304427.1227782165570.JavaMail.www@wwinf1c19>
Chion Jacques wrote:
> I had the same problem with a kernel-2.6.26.3
> i upgraded to kernel 2.6.27 and the problem disappeared with a clean
> response of kissattach.
I'm running 2.6.27 and still getting traces when I try to connect in to my linux box.
Interestingly enough, the TNC seems to respond by itself to the CONN dialog - I can see the radio Tx
light coming on, and the TNC that I'm calling from gets connected and then immediately disconnected.
What should I set "MYCALL" to on the TNC itself? Does it also get K6DBG-10 (my Linux port's
call/ssid), or something else?
This is interesting, too:
k6dbg-10:/home/cak# mheard
Callsign Port Packets Last Heard
K6B 0 9 Fri Nov 28 15:15:13
I'm calling from K6DBG-7, not K6B ... I'm using mkiss, maybe I should try without?
[42949467.650000] NET: Registered protocol family 3
[42949477.640000] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[42949551.590000] mkiss: ax0: crc mode is auto.
[42949551.600000] ADDRCONF(NETDEV_CHANGE): ax0: link becomes ready
[42949584.490000] mheardd uses obsolete (PF_INET,SOCK_PACKET)
[42949646.780000] mkiss: ax0: Trying crc-smack
[ 108.300000] ------------[ cut here ]------------
[ 108.300000] WARNING: at kernel/softirq.c:136 local_bh_enable+0x4c/0xb0()
[ 108.300000] Modules linked in: mkiss crc16 ax25 ipv6 ext2 ftdi_sio usbserial evdev ixp4xx_eth
ixp4xx_npe ixp4xx_qmgr ixp4xx_beeper ohci_hcd ext3 jbd mbcache sd_mod crc_t10dif ehci_hcd
usb_storage usbcore scsi_mod
[ 108.300000] [<c002a108>] (dump_stack+0x0/0x14) from [<c003e0e4>] (warn_on_slowpath+0x4c/0x84)
[ 108.300000] [<c003e098>] (warn_on_slowpath+0x0/0x84) from [<c0043768>] (local_bh_enable+0x4c/0xb0)
[ 108.300000] r6:00000001 r5:00000000 r4:c02da4c0
[ 108.300000] [<c004371c>] (local_bh_enable+0x0/0xb0) from [<bf12e834>]
(mkiss_receive_buf+0x3c0/0x41c [mkiss])
[ 108.300000] r4:c1e023a0
[ 108.300000] [<bf12e474>] (mkiss_receive_buf+0x0/0x41c [mkiss]) from [<c01516a8>]
(flush_to_ldisc+0xe0/0x178)
[ 108.300000] [<c01515c8>] (flush_to_ldisc+0x0/0x178) from [<c0151788>]
(tty_flip_buffer_push+0x48/0x58)
[ 108.300000] r8:c0f763a0 r7:c0dc5040 r6:00000001 r5:00000000 r4:00000010
[ 108.300000] [<c0151740>] (tty_flip_buffer_push+0x0/0x58) from [<bf0ba764>]
(ftdi_process_read+0x3f0/0x594 [ftdi_sio])
[ 108.300000] [<bf0ba374>] (ftdi_process_read+0x0/0x594 [ftdi_sio]) from [<bf0bc10c>]
(ftdi_read_bulk_callback+0x144/0x174 [ftdi_sio])
[ 108.300000] [<bf0bbfc8>] (ftdi_read_bulk_callback+0x0/0x174 [ftdi_sio]) from [<bf021698>]
(usb_hcd_giveback_urb+0xb0/0x100 [usbcore])
[ 108.300000] r8:c287e000 r7:00000000 r6:00000000 r5:c0f44400 r4:c0e07320
[ 108.300000] [<bf0215e8>] (usb_hcd_giveback_urb+0x0/0x100 [usbcore]) from [<bf099b70>]
(finish_urb+0x98/0xc4 [ohci_hcd])
[ 108.300000] r6:c0e07320 r5:c0f444e0 r4:c0f44400
[ 108.300000] [<bf099ad8>] (finish_urb+0x0/0xc4 [ohci_hcd]) from [<bf099bf4>]
(takeback_td+0x58/0xe4 [ohci_hcd])
[ 108.300000] r7:c0f444e0 r6:c0e07320 r5:ffc09040 r4:c1e104c0
[ 108.300000] [<bf099b9c>] (takeback_td+0x0/0xe4 [ohci_hcd]) from [<bf09bc98>]
(ohci_irq+0x258/0x384 [ohci_hcd])
[ 108.300000] r7:c0f44400 r6:00000000 r5:c0f444e0 r4:00000000
[ 108.300000] [<bf09ba40>] (ohci_irq+0x0/0x384 [ohci_hcd]) from [<bf021a2c>] (usb_hcd_irq+0x44/0xa0
[usbcore])
[ 108.300000] [<bf0219e8>] (usb_hcd_irq+0x0/0xa0 [usbcore]) from [<c006d880>]
(handle_IRQ_event+0x44/0x84)
[ 108.300000] r5:00000000 r4:c1c8fc60
[ 108.300000] [<c006d83c>] (handle_IRQ_event+0x0/0x84) from [<c006f168>] (handle_level_irq+0x94/0xec)
[ 108.300000] r7:c02bbe48 r6:00000000 r5:0000001b r4:c02c1cd0
[ 108.300000] [<c006f0d4>] (handle_level_irq+0x0/0xec) from [<c0025048>]
(__exception_text_start+0x48/0x64)
[ 108.300000] r5:c02c1cd0 r4:0000001b
[ 108.300000] [<c0025000>] (__exception_text_start+0x0/0x64) from [<c0025810>] (__irq_svc+0x30/0xa0)
[ 108.300000] Exception stack(0xc02b9f58 to 0xc02b9fa0)
[ 108.300000] 9f40: c02dbbb8 d80dc99f
[ 108.300000] 9f60: 13a8939f 60000013 c00272e4 c02b8000 c0022f18 c02bbe48 000211ec 690541f1
[ 108.300000] 9f80: 00020fe4 c02b9fb4 c02b9fa0 c02b9fa0 c002719c c002719c 60000013 ffffffff
[ 108.300000] r6:08000000 r5:0000001f r4:ffffffff
[ 108.300000] [<c0027158>] (cpu_idle+0x0/0x64) from [<c021907c>] (rest_init+0x54/0x68)
[ 108.300000] r5:c02d4f08 r4:c02ecca0
[ 108.300000] [<c0219028>] (rest_init+0x0/0x68) from [<c0008a6c>] (start_kernel+0x2a4/0x314)
[ 108.300000] [<c00087c8>] (start_kernel+0x0/0x314) from [<00008034>] (0x8034)
[ 108.300000] ---[ end trace a392a1cb839725d5 ]---
[ 108.620000] mkiss: ax0: Trying crc-flexnet
prev parent reply other threads:[~2008-11-28 23:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-27 5:01 funny kiss trace Chris Kantarjiev
2008-11-27 10:36 ` Chion Jacques
2008-11-28 23:19 ` Chris Kantarjiev [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49307C8A.4090905@dimebank.com \
--to=cak@dimebank.com \
--cc=f6cwo@orange.fr \
--cc=linux-hams@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox