From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brett Mueller Subject: Re: Need standard PROM image for Paccomm Tiny2 MK2 Date: Fri, 09 Sep 2011 15:43:09 -0700 Message-ID: <4E6A967D.50900@wa7v.com> References: <4E6A93FB.1030207@exemail.com.au> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4E6A93FB.1030207@exemail.com.au> Sender: linux-hams-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" To: Linux HAMs Ray Wells wrote the following on 09/09/2011 15:32: > On 9/10/2011 8:10 AM, Douglas Cole wrote: >> As the subject says, I purchased a number of Paccomm TNC's without >> PROM's (they had X1J PROM's in them and the seller didn't have the >> original ones and pulled his PROM's out) and I need either the >> original PROM that I can duplicate or the image file for it so I can >> program ones for these TNC's. >> I plan on using the TNC's in KISS mode on Linux boxes and so the need >> for the standard PROM image. >> Sorry for the off topic posting but I'm not sure what other list might >> have folks with packet interests, if anyone knows please offer any >> info you can. >> >> 73 > The KISS implementation in a standard EPROM has horrendous, > unpredictable timing issues, suggest you burn a KISS only EPROM. I have > an image but am forced to laptop only at the moment and the file is not > readily available to me. > > Ray vk2tv I've been using a KISS-only EPROM in a Tiny2 with satisfactory results. I believe I burned it from the tnc2kiss.hex file obtained from TAPR at: ftp://ftp.tapr.org/software_lib/tnc/ 73, Brett, WA7V