Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
From: "IT3 Stuart Blake Tener, USN" <teners@bh90210.net>
To: Bob Nielsen <nielsen@oz.net>
Cc: linux-hams@vger.kernel.org
Subject: Re: Some packet questions...
Date: Tue, 31 Oct 2006 12:56:36 -0800	[thread overview]
Message-ID: <C16CF884.A31B%teners@bh90210.net> (raw)
In-Reply-To: <6BDE03F7-CB43-4A2A-911B-38F70478110E@oz.net>

On 10/31/06 12:29 PM, "Bob Nielsen" <nielsen@oz.net> wrote:

> 
> On Oct 31, 2006, at 12:03 PM, IT3 Stuart Blake Tener, USN wrote:
> 
>> On 10/31/06 4:50 AM, "Mike McCarthy, W1NR" <lists@w1nr.net> wrote:
>> 
>>> Nothing has really changed in many years, so the documentation
>>> hasn't had
>>> any reason to be revised.
>>> 
>>> I found my local IP address coordinator very helpful in getting IP
>>> over
>>> AX.25 running.
>> 
>> I have been given so many stories concerning IP address
>> coordination that I
>> got fed up with even trying to coordinate! First I was assigned a
>> 32 address
>> block in the Philly area, then I was told in California that it
>> would not be
>> workable. Why not? If this is truly an IP network, why would I need
>> to have
>> a new set of IP address when only the physical location changed?
>> 
> 
> The subnets are assigned by state and locality.  Philadelphia is part
> of 44.080/16 and Beverly Hills is part of 44.016/16.  It's probably

How did you determine which areas were part of what subnets?

How do I locate the appropriate coordinator for each area in order to assert
a proper application?

> more of a routing issue than anything else.  This stuff is handled
> differently in different locations (some route by subnets; others do
> not).

Is there a way to find out if a particular area is in fact routed or not,
and if not, what I need to do if I want to provide a way to route it for
that particular area (using a VPN tunnel over the Internet)?

What steps must I take to apply for a group of (say 32) addresses for the
Beverly Hills, Las Vegas, or Philly/DC area?

> 
>> I am still interested now to find out what my current IP assignment
>> is, and
>> as well what the 32 address range is I was given.
>> 
> 
> I don't see n3gwg anywhere in the ampr.org list <ftp://ftp.ucsd.edu/
> hamradio/ampr.org>.

I noticed that I was conspicuously missing as well after a quick review post
your commentary. I used to have an allocation, but it seems apparently
evaporated.

> 
> 73 - Bob, N7XY
> Bainbridge Island, WA
> 



-- 

Very Respectfully,

IT3 Stuart Blake Tener, USN
Beverly Hills, California
Amateur Radio Call Sign: N3GWG (Extra)
email: teners@bh90210.net
phone: +(1) 310.358.0202 (Beverly Hills, CA)
phone: +(1) 215.338.6005 (Philadelphia, PA)
E-Fax: +(1) 915.773.0935 (Telecopier)

Military emails (checked monthly until remote NMCI access is secured)
NIPRNET: stuart.tener@navy.mil / tenerstu@nro.mil / stuart.tener@dia.mil
SIPRNET: NONE
TS/SCI:  cntensb@dia.ic.gov (JWICS) / tenerstu@nro.ic.gov (GWAN)
TS/SCI:  cntensb@mail.dia.us.qlat (Stone Ghost, TS//SI/REL AUS/CAN/GBR/USA)

One must like the horse to ride.

Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and/or privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.




  reply	other threads:[~2006-10-31 20:56 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-30 21:56 Some packet questions IT3 Stuart Blake Tener, USN
2006-10-31 12:50 ` Mike McCarthy, W1NR
2006-10-31 20:03   ` IT3 Stuart Blake Tener, USN
2006-10-31 20:29     ` Bob Nielsen
2006-10-31 20:56       ` IT3 Stuart Blake Tener, USN [this message]
2006-10-31 23:46         ` Bob Nielsen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=C16CF884.A31B%teners@bh90210.net \
    --to=teners@bh90210.net \
    --cc=linux-hams@vger.kernel.org \
    --cc=nielsen@oz.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox