From: "Christopher M. Riedl" <cmr@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: tglx@linutronix.de, x86@kernel.org,
linux-hardening@vger.kernel.org, keescook@chromium.org
Subject: [RESEND PATCH v4 00/11] Use per-CPU temporary mappings for patching
Date: Wed, 5 May 2021 23:34:41 -0500 [thread overview]
Message-ID: <20210506043452.9674-1-cmr@linux.ibm.com> (raw)
When compiled with CONFIG_STRICT_KERNEL_RWX, the kernel must create
temporary mappings when patching itself. These mappings temporarily
override the strict RWX text protections to permit a write. Currently,
powerpc allocates a per-CPU VM area for patching. Patching occurs as
follows:
1. Map page in per-CPU VM area w/ PAGE_KERNEL protection
2. Patch text
3. Remove the temporary mapping
While the VM area is per-CPU, the mapping is actually inserted into the
kernel page tables. Presumably, this could allow another CPU to access
the normally write-protected text - either malicously or accidentally -
via this same mapping if the address of the VM area is known. Ideally,
the mapping should be kept local to the CPU doing the patching [0].
x86 introduced "temporary mm" structs which allow the creation of
mappings local to a particular CPU [1]. This series intends to bring the
notion of a temporary mm to powerpc and harden powerpc by using such a
mapping for patching a kernel with strict RWX permissions.
The first four patches implement an LKDTM test "proof-of-concept" which
exploits the potential vulnerability (ie. the temporary mapping during
patching is exposed in the kernel page tables and accessible by other
CPUs) using a simple brute-force approach. This test is implemented for
both powerpc and x86_64. The test passes on powerpc with this new
series, fails on upstream powerpc, passes on upstream x86_64, and fails
on an older (ancient) x86_64 tree without the x86_64 temporary mm
patches. The remaining patches add support for and use a temporary mm
for code patching on powerpc.
Tested boot, ftrace, and repeated LKDTM "hijack":
- QEMU+KVM (host: POWER9 Blackbird): Radix MMU w/ KUAP
- QEMU+KVM (host: POWER9 Blackbird): Hash MMU w/o KUAP
- QEMU+KVM (host: POWER9 Blackbird): Hash MMU w/ KUAP
Tested repeated LKDTM "hijack":
- QEMU+KVM (host: AMD desktop): x86_64 upstream
- QEMU+KVM (host: AMD desktop): x86_64 w/o percpu temp mm to
verify the LKDTM "hijack" fails
Tested boot and ftrace:
- QEMU+TCG: ppc44x (bamboo)
- QEMU+TCG: g5 (mac99)
I also tested with various extra config options enabled as suggested in
section 12) in Documentation/process/submit-checklist.rst.
[ Apologies about the resend - some of the patches were dropped by
the CC'd linux-hardening list due to tls problems between mailbox.org
and vger.kernel.org. I re-signed my patches w/ my IBM email; no other
changes. ]
v4: * It's time to revisit this series again since @jpn and @mpe fixed
our known STRICT_*_RWX bugs on powerpc/64s.
* Rebase on linuxppc/next:
commit ee1bc694fbaec ("powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n")
* Completely rework how map_patch() works on book3s64 Hash MMU
* Split the LKDTM x86_64 and powerpc bits into separate patches
* Annotate commit messages with changes from v3 instead of
listing them here completely out-of context...
v3: * Rebase on linuxppc/next: commit 9123e3a74ec7 ("Linux 5.9-rc1")
* Move temporary mm implementation into code-patching.c where it
belongs
* Implement LKDTM hijacker test on x86_64 (on IBM time oof) Do
* not use address zero for the patching address in the
temporary mm (thanks @dja for pointing this out!)
* Wrap the LKDTM test w/ CONFIG_SMP as suggested by Christophe
Leroy
* Comments to clarify PTE pre-allocation and patching addr
selection
v2: * Rebase on linuxppc/next:
commit 105fb38124a4 ("powerpc/8xx: Modify ptep_get()")
* Always dirty pte when mapping patch
* Use `ppc_inst_len` instead of `sizeof` on instructions
* Declare LKDTM patching addr accessor in header where it belongs
v1: * Rebase on linuxppc/next (4336b9337824)
* Save and restore second hw watchpoint
* Use new ppc_inst_* functions for patching check and in LKDTM test
rfc-v2: * Many fixes and improvements mostly based on extensive feedback
and testing by Christophe Leroy (thanks!).
* Make patching_mm and patching_addr static and move
'__ro_after_init' to after the variable name (more common in
other parts of the kernel)
* Use 'asm/debug.h' header instead of 'asm/hw_breakpoint.h' to
fix PPC64e compile
* Add comment explaining why we use BUG_ON() during the init
call to setup for patching later
* Move ptep into patch_mapping to avoid walking page tables a
second time when unmapping the temporary mapping
* Use KUAP under non-radix, also manually dirty the PTE for patch
mapping on non-BOOK3S_64 platforms
* Properly return any error from __patch_instruction
* Do not use 'memcmp' where a simple comparison is appropriate
* Simplify expression for patch address by removing pointer maths
* Add LKDTM test
[0]: https://github.com/linuxppc/issues/issues/224
[1]: https://lore.kernel.org/kernel-hardening/20190426232303.28381-1-nadav.amit@gmail.com/
Christopher M. Riedl (11):
powerpc: Add LKDTM accessor for patching addr
lkdtm/powerpc: Add test to hijack a patch mapping
x86_64: Add LKDTM accessor for patching addr
lkdtm/x86_64: Add test to hijack a patch mapping
powerpc/64s: Add ability to skip SLB preload
powerpc: Introduce temporary mm
powerpc/64s: Make slb_allocate_user() non-static
powerpc: Initialize and use a temporary mm for patching
lkdtm/powerpc: Fix code patching hijack test
powerpc: Protect patching_mm with a lock
powerpc: Use patch_instruction_unlocked() in loops
arch/powerpc/include/asm/book3s/64/mmu-hash.h | 1 +
arch/powerpc/include/asm/book3s/64/mmu.h | 3 +
arch/powerpc/include/asm/code-patching.h | 8 +
arch/powerpc/include/asm/debug.h | 1 +
arch/powerpc/include/asm/mmu_context.h | 13 +
arch/powerpc/kernel/epapr_paravirt.c | 9 +-
arch/powerpc/kernel/optprobes.c | 22 +-
arch/powerpc/kernel/process.c | 5 +
arch/powerpc/lib/code-patching.c | 348 +++++++++++++-----
arch/powerpc/lib/feature-fixups.c | 114 ++++--
arch/powerpc/mm/book3s64/mmu_context.c | 2 +
arch/powerpc/mm/book3s64/slb.c | 60 +--
arch/powerpc/xmon/xmon.c | 22 +-
arch/x86/include/asm/text-patching.h | 4 +
arch/x86/kernel/alternative.c | 7 +
drivers/misc/lkdtm/core.c | 1 +
drivers/misc/lkdtm/lkdtm.h | 1 +
drivers/misc/lkdtm/perms.c | 149 ++++++++
18 files changed, 608 insertions(+), 162 deletions(-)
--
2.26.1
next reply other threads:[~2021-05-06 4:40 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 4:34 Christopher M. Riedl [this message]
2021-05-06 4:34 ` [RESEND PATCH v4 01/11] powerpc: Add LKDTM accessor for patching addr Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 02/11] lkdtm/powerpc: Add test to hijack a patch mapping Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 03/11] x86_64: Add LKDTM accessor for patching addr Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 04/11] lkdtm/x86_64: Add test to hijack a patch mapping Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 05/11] powerpc/64s: Add ability to skip SLB preload Christopher M. Riedl
2021-06-21 3:13 ` Daniel Axtens
2021-07-01 3:48 ` Christopher M. Riedl
2021-07-01 4:15 ` Nicholas Piggin
2021-07-01 5:28 ` Christopher M. Riedl
2021-07-01 6:04 ` Nicholas Piggin
2021-07-01 6:53 ` Christopher M. Riedl
2021-07-01 7:37 ` Nicholas Piggin
2021-07-01 11:30 ` Nicholas Piggin
2021-07-09 4:55 ` Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 06/11] powerpc: Introduce temporary mm Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 07/11] powerpc/64s: Make slb_allocate_user() non-static Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 08/11] powerpc: Initialize and use a temporary mm for patching Christopher M. Riedl
2021-06-21 3:19 ` Daniel Axtens
2021-07-01 5:11 ` Christopher M. Riedl
2021-07-01 6:12 ` Nicholas Piggin
2021-07-01 7:02 ` Christopher M. Riedl
2021-07-01 7:51 ` Nicholas Piggin
2021-07-09 5:03 ` Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 09/11] lkdtm/powerpc: Fix code patching hijack test Christopher M. Riedl
2021-05-06 4:34 ` [RESEND PATCH v4 10/11] powerpc: Protect patching_mm with a lock Christopher M. Riedl
2021-05-06 10:51 ` Peter Zijlstra
2021-05-07 20:03 ` Christopher M. Riedl
2021-05-07 22:26 ` Peter Zijlstra
2021-05-06 4:34 ` [RESEND PATCH v4 11/11] powerpc: Use patch_instruction_unlocked() in loops Christopher M. Riedl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210506043452.9674-1-cmr@linux.ibm.com \
--to=cmr@linux.ibm.com \
--cc=keescook@chromium.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).