[PATCH 21/28] dpll: zl3073x: Implement input pin state setting in automatic mode

[Ivan Vecera <ivecera@redhat.com>]

This implements input pin state setting when the DPLL is running in
automatic mode. Unlike manual mode, the DPLL mode switching is not used
here and the implementation uses special priority value (15) to make
the given pin non-selectable.
When the user sets state of the pin as disconnected the driver
internally sets its priority in HW to 15 that prevents the DPLL to
choose this input pin. Conversely, if the pin status is set to
selectable, the driver sets the pin priority in HW to the original saved
value.

Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
 drivers/dpll/dpll_zl3073x.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/dpll/dpll_zl3073x.c b/drivers/dpll/dpll_zl3073x.c
index 072a33ec12399..192e0e56fcdde 100644
--- a/drivers/dpll/dpll_zl3073x.c
+++ b/drivers/dpll/dpll_zl3073x.c
@@ -528,6 +528,37 @@ zl3073x_dpll_input_pin_state_on_dpll_set(const struct dpll_pin *dpll_pin,
 
 		rc = zl3073x_dpll_selected_ref_set(zldpll, new_ref);
 		break;
+
+	case DPLL_MODE_REFSEL_MODE_AUTO:
+		if (state == DPLL_PIN_STATE_SELECTABLE) {
+			if (pin->selectable)
+				return 0; /* Pin is already selectable */
+
+			/* Restore pin priority in HW */
+			rc = zl3073x_dpll_ref_prio_set(pin, pin->prio);
+			if (rc)
+				return rc;
+
+			/* Mark pin as selectable */
+			pin->selectable = true;
+		} else if (state == DPLL_PIN_STATE_DISCONNECTED) {
+			if (!pin->selectable)
+				return 0; /* Pin is already disconnected */
+
+			/* Set pin priority to none in HW */
+			rc = zl3073x_dpll_ref_prio_set(pin, DPLL_REF_PRIO_NONE);
+			if (rc)
+				return rc;
+
+			/* Mark pin as non-selectable */
+			pin->selectable = false;
+		} else {
+			NL_SET_ERR_MSG(extack,
+				       "Invalid pin state for automatic mode");
+			return -EINVAL;
+		}
+		break;
+
 	default:
 		/* In other modes we cannot change input reference */
 		NL_SET_ERR_MSG(extack,
-- 
2.48.1