From: Milan Tripkovic <milant2002@gmail.com>
To: Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>, Kees Cook <kees@kernel.org>,
Andy Shevchenko <andy@kernel.org>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-hardening@vger.kernel.org, llvm@lists.linux.dev,
Dusan Stojkovic <Dusan.Stojkovic@rt-rk.com>,
Milan Tripkovic <Milan.Tripkovic@rt-rk.com>
Subject: [PATCH v2 1/2] riscv: lib: add memcmp() implementation
Date: Thu, 14 May 2026 14:13:57 +0200 [thread overview]
Message-ID: <20260514121359.931999-2-milant2002@gmail.com> (raw)
In-Reply-To: <20260514121359.931999-1-milant2002@gmail.com>
From: Milan Tripkovic <Milan.Tripkovic@rt-rk.com>
Add an assembly implementation of memcmp() for RISC-V. The implementation
uses the ZBB extension for word-at-a-time comparison and an assembly
fallback for non-ZBB systems.
Benchmark results (QEMU TCG, rv64, Aligned):
Len | Default | NoZBB | ZBB | %NoZBB | %ZBB
------|---------|--------|--------|--------|-------
1 B | 20.3 | 25.0 | 20.9 | +23.2% | +3.0%
7 B | 88.9 | 107.5 | 155.7 | +20.9% | +75.1%
8 B | 89.6 | 110.9 | 176.2 | +23.8% | +96.7%
16 B | 134.4 | 172.4 | 334.8 | +28.3% | +149.1%
31 B | 163.5 | 220.5 | 606.2 | +34.9% | +270.8%
64 B | 203.8 | 235.9 | 968.6 | +15.8% | +375.3%
127 B | 224.6 | 268.7 | 1362.8 | +19.6% | +506.8%
512 B | 235.7 | 271.1 | 1913.7 | +15.0% | +711.9%
1024 B| 256.8 | 290.6 | 2123.6 | +13.2% | +726.9%
4096 B| 263.8 | 302.9 | 2290.4 | +14.8% | +768.2%
Benchmark results (QEMU TCG, rv64, Unaligned - Offset 3):
Len | Default | NoZBB | ZBB | %NoZBB | %ZBB
------|---------|--------|--------|--------|-------
1 B | 20.7 | 21.7 | 21.5 | +4.8% | +3.9%
7 B | 96.2 | 99.1 | 96.9 | +3.0% | +0.7%
8 B | 97.5 | 118.5 | 110.5 | +21.5% | +13.3%
16 B | 136.7 | 166.6 | 172.8 | +21.9% | +26.4%
31 B | 167.6 | 206.5 | 211.9 | +23.2% | +26.4%
64 B | 204.4 | 229.9 | 240.3 | +12.5% | +17.6%
127 B | 229.6 | 261.7 | 269.0 | +14.0% | +17.2%
512 B | 245.5 | 260.8 | 269.9 | +6.2% | +9.9%
1024 B| 246.9 | 261.2 | 283.5 | +5.8% | +14.8%
4096 B| 250.7 | 295.8 | 299.7 | +18.0% | +19.5%
Signed-off-by: Milan Tripkovic <Milan.Tripkovic@rt-rk.com>
---
arch/riscv/include/asm/string.h | 2 +
arch/riscv/lib/Makefile | 1 +
arch/riscv/lib/memcmp.S | 124 ++++++++++++++++++++++++++++++++
arch/riscv/purgatory/Makefile | 5 +-
4 files changed, 131 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/lib/memcmp.S
diff --git a/arch/riscv/include/asm/string.h b/arch/riscv/include/asm/string.h
index 764ffe8f6479..5c5299678c66 100644
--- a/arch/riscv/include/asm/string.h
+++ b/arch/riscv/include/asm/string.h
@@ -18,6 +18,8 @@ extern asmlinkage void *__memcpy(void *, const void *, size_t);
#define __HAVE_ARCH_MEMMOVE
extern asmlinkage void *memmove(void *, const void *, size_t);
extern asmlinkage void *__memmove(void *, const void *, size_t);
+#define __HAVE_ARCH_MEMCMP
+extern asmlinkage int memcmp(const void *, const void *, size_t);
#if !(defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS))
#define __HAVE_ARCH_STRCMP
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 6f767b2a349d..b529e1be18b2 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -3,6 +3,7 @@ lib-y += delay.o
lib-y += memcpy.o
lib-y += memset.o
lib-y += memmove.o
+lib-y += memcmp.o
ifeq ($(CONFIG_KASAN_GENERIC)$(CONFIG_KASAN_SW_TAGS),)
lib-y += strcmp.o
lib-y += strlen.o
diff --git a/arch/riscv/lib/memcmp.S b/arch/riscv/lib/memcmp.S
new file mode 100644
index 000000000000..f7d0eaa08880
--- /dev/null
+++ b/arch/riscv/lib/memcmp.S
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+#include <asm/alternative-macros.h>
+#include <asm/hwcap.h>
+
+/* int memcmp(const void *cs, const void *ct, size_t n) */
+SYM_FUNC_START(memcmp)
+
+ __ALTERNATIVE_CFG("nop", "j memcmp_zbb", 0, RISCV_ISA_EXT_ZBB,
+ IS_ENABLED(CONFIG_RISCV_ISA_ZBB) && IS_ENABLED(CONFIG_TOOLCHAIN_HAS_ZBB))
+/*
+ * Parameters
+ * a0 - Pointer to first memory block (cs), also return value
+ * a1 - Pointer to second memory block (ct)
+ * a2 - Number of bytes to compare (n), transformed to end pointer (a0 + n)
+ *
+ * Returns
+ * a0 - 0 if equal, positive if cs > ct, negative if cs < ct
+ *
+ * Clobbers
+ * t0, t1
+ */
+ beqz a2, 2f
+ add a2, a0, a2
+1:
+ lbu t0, 0(a0)
+ lbu t1, 0(a1)
+ bne t0, t1, 3f
+ addi a0, a0, 1
+ addi a1, a1, 1
+ bne a0, a2, 1b
+2:
+ li a0, 0
+ ret
+3:
+ sub a0, t0, t1
+ ret
+
+
+memcmp_zbb:
+.option push
+.option arch,+zbb
+/*
+ * Parameters
+ * a0 - Pointer to first memory block (cs), also return value
+ * a1 - Pointer to second memory block (ct)
+ * a2 - Number of bytes to compare (n), decremented during loop
+ *
+ * Returns
+ * a0 - 0 if equal, positive if cs > ct, negative if cs < ct
+ *
+ * Clobbers
+ * t0, t1, t2, t3, t4
+ */
+ add t3, a0, a2
+ or t0, a0, a1
+ andi t0, t0, (SZREG - 1)
+ bnez t0, 5f
+
+ addi t4, t3, -SZREG
+ bltu t4, a0, 7f
+
+1:
+ REG_L t1, 0(a0)
+ REG_L t2, 0(a1)
+ bne t1, t2, 2f
+ addi a0, a0, SZREG
+ addi a1, a1, SZREG
+ bleu a0, t4, 1b
+
+7:
+ beq a0, t3, 4f
+ REG_L t1, 0(a0)
+ REG_L t2, 0(a1)
+
+ sub t0, t3, a0
+ li t4, SZREG
+ sub t0, t4, t0
+ slli t0, t0, 3
+
+#ifndef CONFIG_CPU_BIG_ENDIAN
+ rev8 t1, t1
+ rev8 t2, t2
+#endif
+ srl t1, t1, t0
+ srl t2, t2, t0
+
+ bne t1, t2, 8f
+ li a0, 0
+ ret
+5:
+ beq a0, t3, 4f
+6:
+ lbu t1, 0(a0)
+ lbu t2, 0(a1)
+ bne t1, t2, 3f
+ addi a0, a0, 1
+ addi a1, a1, 1
+ bne a0, t3, 6b
+
+4: li a0, 0
+ ret
+2:
+#ifndef CONFIG_CPU_BIG_ENDIAN
+ rev8 t1, t1
+ rev8 t2, t2
+#endif
+8:
+ sltu a0, t2, t1
+ sltu t0, t1, t2
+ sub a0, a0, t0
+ ret
+
+3:
+ sub a0, t1, t2
+ ret
+
+.option pop
+
+SYM_FUNC_END(memcmp)
+SYM_FUNC_ALIAS(__pi_memcmp, memcmp)
+EXPORT_SYMBOL(memcmp)
diff --git a/arch/riscv/purgatory/Makefile b/arch/riscv/purgatory/Makefile
index b0358a78f11a..456929971da7 100644
--- a/arch/riscv/purgatory/Makefile
+++ b/arch/riscv/purgatory/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-purgatory-y := purgatory.o sha256.o entry.o string.o ctype.o memcpy.o memset.o
+purgatory-y := purgatory.o sha256.o entry.o string.o ctype.o memcpy.o memset.o memcmp.o
ifeq ($(CONFIG_KASAN_GENERIC)$(CONFIG_KASAN_SW_TAGS),)
purgatory-y += strcmp.o strlen.o strncmp.o strnlen.o strchr.o strrchr.o
endif
@@ -41,6 +41,9 @@ $(obj)/strchr.o: $(srctree)/arch/riscv/lib/strchr.S FORCE
$(obj)/strrchr.o: $(srctree)/arch/riscv/lib/strrchr.S FORCE
$(call if_changed_rule,as_o_S)
+$(obj)/memcmp.o: $(srctree)/arch/riscv/lib/memcmp.S FORCE
+ $(call if_changed_rule,as_o_S)
+
CFLAGS_sha256.o := -D__DISABLE_EXPORTS -D__NO_FORTIFY
CFLAGS_string.o := -D__DISABLE_EXPORTS
CFLAGS_ctype.o := -D__DISABLE_EXPORTS
--
2.43.0
next prev parent reply other threads:[~2026-05-14 12:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-14 12:13 [PATCH v2 0/2] riscv: lib: add optimized memcmp() and extend KUnit tests Milan Tripkovic
2026-05-14 12:13 ` Milan Tripkovic [this message]
2026-05-14 12:13 ` [PATCH v2 2/2] lib/string_kunit: extend benchmarks and unit test to memcmp() Milan Tripkovic
2026-05-14 16:19 ` Kees Cook
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260514121359.931999-2-milant2002@gmail.com \
--to=milant2002@gmail.com \
--cc=Dusan.Stojkovic@rt-rk.com \
--cc=Milan.Tripkovic@rt-rk.com \
--cc=alex@ghiti.fr \
--cc=andy@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=justinstitt@google.com \
--cc=kees@kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=llvm@lists.linux.dev \
--cc=morbo@google.com \
--cc=nathan@kernel.org \
--cc=nick.desaulniers+lkml@gmail.com \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox