Linux Hardening
 help / color / mirror / Atom feed
From: "Kunwu Chan" <kunwu.chan@linux.dev>
To: "Lian Wang" <lianux.mm@gmail.com>,
	linux-mm@kvack.org, Kunwu.chan@gmail.com
Cc: linux-kernel@vger.kernel.org,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Chris Li" <chrisl@kernel.org>, "Nhat Pham" <nphamcs@gmail.com>,
	"Baoquan He" <baoquan.he@linux.dev>,
	"Barry Song" <baohua@kernel.org>,
	"Youngjun Park" <youngjun.park@lge.com>,
	"Kemeng Shi" <shikemeng@huaweicloud.com>,
	"Kairui Song" <kasong@tencent.com>,
	"Jihan LIN" <linjh22s@gmail.com>, "Kees Cook" <kees@kernel.org>,
	"Gustavo A. R. Silva" <gustavoars@kernel.org>,
	"Thomas Gleixner" <tglx@kernel.org>,
	linux-hardening@vger.kernel.org
Subject: Re: [RFC PATCH v4 05/18] mm/swap: change the swapon lock into a percpu rwsem
Date: Fri, 20 Nov 2026 04:12:30 +0000	[thread overview]
Message-ID: <4f98fc9098d6a674f279ed2325f3426f01172b04@linux.dev> (raw)
In-Reply-To: <97d49d0477b3bde77936d734ae377fb19efda357.1794666741.git.lianux.mm@gmail.com>

> 
> From: Kairui Song <kasong@tencent.com>
> 
> Reading swap metadata is a common hot path, while swapon and swapoff
> are costly and rare. Convert swap_lock from a spinlock to the
> swapon_rwsem percpu rwsem so metadata readers can run concurrently.
> Writers still serialize topology changes and exclude readers.
> 
> Preserve the atomic writable/off-list/available-list transition under
> swap_avail_lock. The device-selection and cluster-allocation paths do
> not yet hold swapon_rwsem; the priority queue patch adds that allocation
> reader protocol.
> 
> Also update the comments in swap_info_struct to reflect the lock
> name change.
> 
> Signed-off-by: Kairui Song <kasong@tencent.com>
> Signed-off-by: Lian Wang <lianux.mm@gmail.com>
> ---
>  include/linux/swap.h | 10 ++--
>  mm/swapfile.c | 130 ++++++++++++++++++++++---------------------
>  2 files changed, 73 insertions(+), 67 deletions(-)
> 
> diff --git a/include/linux/swap.h b/include/linux/swap.h
> index 0fa77f5679a2..717387e16a2d 100644
> --- a/include/linux/swap.h
> +++ b/include/linux/swap.h
> @@ -192,18 +192,18 @@ struct swap_extent {
>  * Swap device flags, except the ones documented below, all are immutable
>  * after exposed by swap_device_enable, and until the device is freed again
>  * (SWP_USED unset), except that teardown clears SWP_ACTIVATED after draining
> - * allocators and live references. The other exceptions:
> - * - SWP_USED: Protected by swap_lock. Indicates the device is inuse. Once
> + * allocators and live references. The other exceptions use swapon_rwsem:
> + * - SWP_USED: Protected by swapon_rwsem. Indicates the device is inuse. Once
>  * set, won't be cleared unless all reference to this device is freed and
>  * swapoff finished.
> - * - SWP_WRITEOK: Protected by swap_lock, si->lock and swap_avail_lock.
> + * - SWP_WRITEOK: Protected by swapon_rwsem, si->lock and swap_avail_lock.
>  * Clearing this flag is followed by waiting for all current cluster lock
>  * users to exit, so
>  * checking this flag while holding any of these locks ensures the device
>  * is safe to use at the moment. Note: clearing this flag doesn't affect
>  * pending IO or async requests, it only prevents further entry allocation
>  * or new async request (e.g. discard) from initiating.
> - * - SWP_HIBERNATION: Protected by swap_lock. Indicates if the device
> + * - SWP_HIBERNATION: Protected by swapon_rwsem. Indicates if the device
>  * is pinned for hibernation.
>  */
>  enum {
> @@ -276,7 +276,7 @@ struct swap_info_struct {
>  spinlock_t lock; /*
>  * Protect cluster lists. Other fields
>  * are only changed at swapon/swapoff,
> - * so are protected by swap_lock.
> + * so are protected by swapon_rwsem.
>  */
>  struct work_struct discard_work; /* discard worker */
>  struct work_struct reclaim_work; /* reclaim worker */
> diff --git a/mm/swapfile.c b/mm/swapfile.c
> index 1669a46515cd..ae8421e18448 100644
> --- a/mm/swapfile.c
> +++ b/mm/swapfile.c
> @@ -57,23 +57,28 @@ static void move_cluster(struct swap_info_struct *si,
>  enum swap_cluster_flags new_flags);
>  
>  /*
> - * Protects the swap_info array, and the SWP_USED flag. swap_info contains
> - * lazily allocated & freed swap device info struts, and SWP_USED indicates
> - * which device is used, ~SWP_USED devices and can be reused.
> - *
> - * Also protects swap_active_head total_swap_pages, and the SWP_WRITEOK flag.
> + * Serializes swapon/swapoff (writers) and protects the swap_info
> + * array, nr_swapfiles, total_swap_pages, and part of swap device
> + * info content (see comment of swap_info_struct). Read-side users
> + * take percpu_down_read() while inspecting this protected state.
> + */
> +DEFINE_STATIC_PERCPU_RWSEM(swapon_rwsem);
> +/*
> + * swap_info contains lazily allocated swap device info structs, and
> + * SWP_USED indicates which device is used, ~SWP_USED devices can be
> + * reused. Protected by swapon_rwsem, but reading could be lockless.
>  */
> -static DEFINE_SPINLOCK(swap_lock);
> +struct swap_info_struct *swap_info[MAX_SWAPFILES];
>  static unsigned int nr_swapfiles;
> -atomic_long_t nr_swap_pages;
> +long total_swap_pages;
> +
>  /*
>  * Some modules use swappable objects and may try to swap them out under
>  * memory pressure (via the shrinker). Before doing so, they may wish to
>  * check to see if any swap space is available.
>  */
> +atomic_long_t nr_swap_pages;
>  EXPORT_SYMBOL_GPL(nr_swap_pages);
> -/* protected with swap_lock. reading in vm_swap_full() doesn't need lock */
> -long total_swap_pages;
>  #define DEF_SWAP_PRIO -1
>  unsigned long swapfile_maximum_size;
>  #ifdef CONFIG_MIGRATION
> @@ -85,7 +90,7 @@ static const char Bad_offset[] = "Bad swap offset entry ";
>  
>  /*
>  * all active swap_info_structs
> - * protected with swap_lock, and ordered by priority.
> + * protected with swapon_rwsem, and ordered by priority.
>  */
>  static PLIST_HEAD(swap_active_head);
>  
> @@ -95,20 +100,18 @@ static PLIST_HEAD(swap_active_head);
>  * This is used by folio_alloc_swap() instead of swap_active_head
>  * because swap_active_head includes all swap_info_structs,
>  * but folio_alloc_swap() doesn't need to look at full ones.
> - * This uses its own lock instead of swap_lock because when a
> + * This uses its own lock instead of swapon_rwsem because when a
>  * swap_info_struct changes between not-full/full, it needs to
>  * add/remove itself to/from this list, but the swap_info_struct->lock
> - * is held and the locking order requires swap_lock to be taken
> + * is held and the locking order requires swapon_rwsem to be taken
>  * before any swap_info_struct->lock.
>  */
>  static PLIST_HEAD(swap_avail_head);
>  static DEFINE_SPINLOCK(swap_avail_lock);
>  
> -struct swap_info_struct *swap_info[MAX_SWAPFILES];
> -
>  static inline struct swap_info_struct *__swap_iter(int *i, unsigned long flag)
>  {
> - lockdep_assert_held(&swap_lock);
> + lockdep_assert_held(&swapon_rwsem);
>  while (*i < nr_swapfiles) {
>  struct swap_info_struct *si = __swap_type_to_info(*i);
>  
> @@ -128,7 +131,7 @@ static inline struct swap_info_struct *__swap_iter(int *i, unsigned long flag)
>  * for_each_swap - iterate through all allocated and inuse swap devices
>  * @si: the iterator
>  *
> - * Context: The caller must hold swap_lock. The lock may be dropped during
> + * Context: The caller must hold swapon_rwsem. The lock may be dropped during
>  * the loop body but must be re-acquired before the next iteration.
>  */
>  #define for_each_swap(si) __for_each_swap(si, SWP_USED)
> @@ -1309,7 +1312,7 @@ static void del_from_avail_list(struct swap_info_struct *si, bool swapoff)
>  pages | SWAP_USAGE_OFFLIST_BIT))
>  goto skip;
>  } else {
> - lockdep_assert_held(&swap_lock);
> + lockdep_assert_held_write(&swapon_rwsem);
>  lockdep_assert_held(&si->lock);
>  si->flags &= ~SWP_WRITEOK;
>  atomic_long_or(SWAP_USAGE_OFFLIST_BIT, &si->inuse_pages);
> @@ -1441,10 +1444,10 @@ static bool get_swap_device_info(struct swap_info_struct *si)
>  /*
>  * Guarantee the si->users are checked before accessing other
>  * fields of swap_info_struct, and si->flags (SWP_WRITEOK) is
> - * up to dated.
> + * up to date.
>  *
> - * Paired with the spin_unlock() after setup_swap_info() in
> - * swap_device_enable(), and smp_wmb() in swapoff.
> + * Paired with percpu_up_write() in swap_device_enable(), and
> + * smp_wmb() after clearing SWP_WRITEOK in swapoff.
>  */
>  smp_rmb();
>  return true;
> @@ -1529,10 +1532,10 @@ static bool swap_sync_discard(void)
>  bool ret = false;
>  struct swap_info_struct *si, *next;
>  
> - spin_lock(&swap_lock);
> + percpu_down_read(&swapon_rwsem);
>  start_over:
>  plist_for_each_entry_safe(si, next, &swap_active_head, list) {
> - spin_unlock(&swap_lock);
> + percpu_up_read(&swapon_rwsem);
>  if (get_swap_device_info(si)) {
>  if (si->flags & SWP_PAGE_DISCARD)
>  ret = swap_do_scheduled_discard(si);
> @@ -1541,11 +1544,11 @@ static bool swap_sync_discard(void)
>  if (ret)
>  return true;
>  
> - spin_lock(&swap_lock);
> + percpu_down_read(&swapon_rwsem);
>  if (plist_node_empty(&next->list))
>  goto start_over;
>  }
> - spin_unlock(&swap_lock);
> + percpu_up_read(&swapon_rwsem);
>  
>  return false;
>  }
> @@ -2349,7 +2352,7 @@ int pin_hibernation_swap_type(dev_t device, sector_t offset)
>  int ret;
>  struct swap_info_struct *si;
>  
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  ret = __find_hibernation_swap_type(device, offset);
>  if (ret < 0)
>  goto out;
> @@ -2373,7 +2376,7 @@ int pin_hibernation_swap_type(dev_t device, sector_t offset)
>  si->flags |= SWP_HIBERNATION;
>  
>  out:
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  return ret;
>  }
>  
> @@ -2385,7 +2388,7 @@ int pin_hibernation_swap_type(dev_t device, sector_t offset)
>  *
>  * Look up the swap device for @device/@offset and atomically transfer
>  * the SWP_HIBERNATION pin from @old_type (if valid) to the new device,
> - * all under a single swap_lock critical section. This closes the
> + * all under a single swapon_rwsem writer section. This closes the
>  * swapoff() window that exists when callers unpin and re-pin in two
>  * separate operations.
>  *
> @@ -2405,28 +2408,28 @@ int repin_hibernation_swap_type(int old_type, dev_t device, sector_t offset)
>  struct swap_info_struct *old_si, *new_si;
>  int new_type;
>  
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  
>  new_type = __find_hibernation_swap_type(device, offset);
>  if (new_type < 0) {
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  return new_type;
>  }
>  
>  new_si = swap_type_to_info(new_type);
>  if (WARN_ON_ONCE(!new_si)) {
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  return -ENODEV;
>  }
>  
>  old_si = swap_type_to_info(old_type);
>  if (new_si == old_si) {
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  return new_type;
>  }
>  
>  if (WARN_ON_ONCE(new_si->flags & SWP_HIBERNATION)) {
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  return -EBUSY;
>  }
>  
> @@ -2434,7 +2437,7 @@ int repin_hibernation_swap_type(int old_type, dev_t device, sector_t offset)
>  old_si->flags &= ~SWP_HIBERNATION;
>  new_si->flags |= SWP_HIBERNATION;
>  
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  return new_type;
>  }
>  
> @@ -2452,11 +2455,11 @@ void unpin_hibernation_swap_type(int type)
>  {
>  struct swap_info_struct *si;
>  
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  si = swap_type_to_info(type);
>  if (si)
>  si->flags &= ~SWP_HIBERNATION;
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  }
>  
>  /**
> @@ -2481,9 +2484,9 @@ int find_hibernation_swap_type(dev_t device, sector_t offset)
>  {
>  int type;
>  
> - spin_lock(&swap_lock);
> + percpu_down_read(&swapon_rwsem);
>  type = __find_hibernation_swap_type(device, offset);
> - spin_unlock(&swap_lock);
> + percpu_up_read(&swapon_rwsem);
>  
>  return type;
>  }
> @@ -2493,13 +2496,13 @@ int find_first_swap(dev_t *device)
>  int ret = -ENODEV;
>  struct swap_info_struct *si;
>  
> - spin_lock(&swap_lock);
> + percpu_down_read(&swapon_rwsem);
>  for_each_avail_swap(si) {
>  *device = si->bdev->bd_dev;
>  ret = si->type;
>  break;
>  }
> - spin_unlock(&swap_lock);
> + percpu_up_read(&swapon_rwsem);
>  return ret;
>  }
>  
> @@ -2528,7 +2531,7 @@ unsigned int count_swap_pages(int type, int free)
>  {
>  unsigned int n = 0;
>  
> - spin_lock(&swap_lock);
> + percpu_down_read(&swapon_rwsem);
>  if ((unsigned int)type < nr_swapfiles) {
>  struct swap_info_struct *sis = swap_info[type];
>  
> @@ -2540,7 +2543,7 @@ unsigned int count_swap_pages(int type, int free)
>  }
>  spin_unlock(&sis->lock);
>  }
> - spin_unlock(&swap_lock);
> + percpu_up_read(&swapon_rwsem);
>  return n;
>  }
>  #endif /* CONFIG_HIBERNATION */
> @@ -2866,10 +2869,10 @@ static unsigned int find_next_to_unuse(struct swap_info_struct *si,
>  unsigned long swp_tb;
>  
>  /*
> - * No need for swap_lock here: we're just looking
> + * No need for swapon_rwsem here: we're just looking
>  * for whether an entry is in use, not modifying it; false
>  * hits are okay, and sys_swapoff() has already prevented new
> - * allocations from this area (while holding swap_lock).
> + * allocations from this area (while holding swapon_rwsem).
>  */
>  i = prev + 1;
>  while (i < si->max) {
> @@ -3007,8 +3010,8 @@ static int try_to_unuse(unsigned int type)
>  
>  /*
>  * After a successful try_to_unuse, if no swap is now in use, we know
> - * we can empty the mmlist. swap_lock must be held on entry and exit.
> - * Note that mmlist_lock nests inside swap_lock, and an mm must be
> + * we can empty the mmlist. swapon_rwsem must be held on entry and exit.
> + * Note that mmlist_lock nests inside swapon_rwsem, and an mm must be
>  * added to the mmlist just after page_duplicate - before would be racy.
>  */
>  static void drain_mmlist(void)
> @@ -3160,8 +3163,7 @@ static int setup_swap_extents(struct swap_info_struct *sis,
>  */
>  static void swap_device_enable(struct swap_info_struct *si)
>  {
> - spin_lock(&swap_lock);
> -
> + percpu_down_write(&swapon_rwsem);
>  spin_lock(&si->lock);
>  spin_lock(&swap_avail_lock);
>  si->flags |= SWP_WRITEOK;
> @@ -3171,7 +3173,7 @@ static void swap_device_enable(struct swap_info_struct *si)
>  atomic_long_add(si->pages, &nr_swap_pages);
>  total_swap_pages += si->pages;
>  plist_add(&si->list, &swap_active_head);
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  
>  add_to_avail_list(si);
>  }
> @@ -3184,7 +3186,7 @@ static int swap_device_disable(struct address_space *mapping,
>  unsigned long offset, end;
>  int err = -EINVAL;
>  
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  plist_for_each_entry(si, &swap_active_head, list) {
>  if ((si->flags & SWP_WRITEOK) &&
>  si->swap_file->f_mapping == mapping) {
> @@ -3220,12 +3222,12 @@ static int swap_device_disable(struct address_space *mapping,
>  
>  end = ALIGN(si->max, SWAPFILE_CLUSTER);
>  unlock:
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  if (err)
>  return err;
>  
>  /*
> - * The swap allocator doesn't take swap_lock. Looping through every
> + * The swap allocator doesn't take swapon_rwsem. Looping through every
>  * cluster lock after clearing SWP_WRITEOK ensures that allocators see
>  * the updated flag and that no allocation remains in flight.
>  */
> @@ -3339,7 +3341,7 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
>  atomic_dec(&nr_rotate_swap);
>  
>  mutex_lock(&swapon_mutex);
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  spin_lock(&p->lock);
>  drain_mmlist();
>  
> @@ -3350,7 +3352,7 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
>  p->max = 0;
>  p->cluster_info = NULL;
>  spin_unlock(&p->lock);
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  arch_swap_invalidate_area(p->type);
>  zswap_swapoff(p->type);
>  mutex_unlock(&swapon_mutex);
> @@ -3369,10 +3371,14 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
>  * Clear the SWP_USED flag after all resources are freed so that swapon
>  * can reuse this swap_info in alloc_swap_info() safely. It is ok to
>  * not hold p->lock after we cleared its SWP_WRITEOK.
> + *
> + * The write lock ensures the flag clear is visible to lockless
> + * readers of swap_type_to_info() before alloc_swap_info() reuses
> + * this slot.


Could we drop this paragraph? The comment above already explains slot
reuse, and swap_type_to_info() itself doesn't check SWP_USED.


>  */
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  p->flags = 0;
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  
>  atomic_inc(&proc_poll_event);
>  wake_up_interruptible(&proc_poll_wait);
> @@ -3532,13 +3538,13 @@ static struct swap_info_struct *alloc_swap_info(void)
>  return ERR_PTR(-ENOMEM);
>  }
>  
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  for (type = 0; type < nr_swapfiles; type++) {
>  if (!(swap_info[type]->flags & SWP_USED))
>  break;
>  }
>  if (type >= MAX_SWAPFILES) {
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  percpu_ref_exit(&p->users);
>  kvfree(p);
>  return ERR_PTR(-EPERM);
> @@ -3563,7 +3569,7 @@ static struct swap_info_struct *alloc_swap_info(void)
>  plist_node_init(&p->list, 0);
>  plist_node_init(&p->avail_list, 0);
>  p->flags = SWP_USED;
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  if (defer) {
>  percpu_ref_exit(&defer->users);
>  kvfree(defer);
> @@ -3999,9 +4005,9 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
>  * Clear the SWP_USED flag after all resources are freed so
>  * alloc_swap_info can reuse this si safely.
>  */
> - spin_lock(&swap_lock);
> + percpu_down_write(&swapon_rwsem);
>  si->flags = 0;
> - spin_unlock(&swap_lock);
> + percpu_up_write(&swapon_rwsem);
>  if (inced_nr_rotate_swap)
>  atomic_dec(&nr_rotate_swap);
>  if (swap_file)
> @@ -4019,14 +4025,14 @@ void si_swapinfo(struct sysinfo *val)
>  struct swap_info_struct *si;
>  unsigned long nr_to_be_unused = 0;
>  
> - spin_lock(&swap_lock);
> + percpu_down_read(&swapon_rwsem);
>  for_each_swap(si) {
>  if (!(si->flags & SWP_WRITEOK))
>  nr_to_be_unused += swap_usage_in_pages(si);
>  }
>  val->freeswap = atomic_long_read(&nr_swap_pages) + nr_to_be_unused;
>  val->totalswap = total_swap_pages + nr_to_be_unused;
> - spin_unlock(&swap_lock);
> + percpu_up_read(&swapon_rwsem);
>  }
>  
>  /*
>

  reply	other threads:[~2026-11-20  4:12 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-14 14:47 [RFC PATCH v4 00/18] mm/swap: introduce priority queues for swap device allocation Lian Wang
2026-11-14 14:48 ` [RFC PATCH v4 01/18] mm/swap: remove unused parameter for reading swap header Lian Wang
2026-11-19 15:56   ` Kunwu Chan
2026-11-14 14:49 ` [RFC PATCH v4 02/18] mm/swap: clean up hibernation error handling Lian Wang
2026-11-19 15:57   ` Kunwu Chan
2026-11-14 14:49 ` [RFC PATCH v4 03/18] mm/swap: cleanup and document swap device availability flag usage Lian Wang
2026-11-20  3:58   ` Kunwu Chan
2026-11-14 14:49 ` [RFC PATCH v4 04/18] mm/swap: introduce swap device iteration helper Lian Wang
2026-11-20  3:59   ` Kunwu Chan
2026-11-14 14:49 ` [RFC PATCH v4 05/18] mm/swap: change the swapon lock into a percpu rwsem Lian Wang
2026-11-20  4:12   ` Kunwu Chan [this message]
2026-11-14 14:49 ` [RFC PATCH v4 06/18] mm/swap: serialize swap publication before removing swapon mutex Lian Wang
2026-11-20  4:30   ` Kunwu Chan
2026-11-14 14:50 ` [RFC PATCH v4 07/18] mm/swap: consolidate swap inuse accounting helpers Lian Wang
2026-11-20  4:30   ` Kunwu Chan
2026-11-14 14:50 ` [RFC PATCH v4 08/18] mm/swap: change back to use each swap device's percpu cluster Lian Wang
2026-11-20  4:31   ` Kunwu Chan
2026-11-14 14:50 ` [RFC PATCH v4 09/18] mm/swap: avoid direct reclaim when populating swap cluster metadata Lian Wang
2026-11-20  4:31   ` Kunwu Chan
2026-11-14 14:50 ` [RFC PATCH v4 10/18] mm/swap: add priority queue for swap device allocation Lian Wang
2026-11-16  3:51   ` Kairui Song
2026-11-16 11:11     ` Lian Wang
2026-11-20  4:34   ` Kunwu Chan
2026-11-14 14:51 ` [RFC PATCH v4 11/18] mm/swap: remove available list Lian Wang
2026-11-20  4:36   ` Kunwu Chan
2026-11-14 14:51 ` [RFC PATCH v4 12/18] mm/swap: bound synchronous discard outside the allocation reader Lian Wang
2026-11-20  4:36   ` Kunwu Chan
2026-11-14 14:51 ` [RFC PATCH v4 13/18] mm/swap: drop swap active plist Lian Wang
2026-11-20  4:37   ` Kunwu Chan
2026-11-14 14:51 ` [RFC PATCH v4 14/18] lib/plist.c: remove requeue function Lian Wang
2026-11-14 14:52 ` [RFC PATCH v4 15/18] mm/swap: reuse per-CPU queue readers across priority changes Lian Wang
2026-11-20  4:37   ` Kunwu Chan
2026-11-14 14:52 ` [RFC PATCH v4 16/18] mm/swap: advance the global queue cursor directly between priority rings Lian Wang
2026-11-20  4:38   ` Kunwu Chan
2026-11-14 14:52 ` [RFC PATCH v4 17/18] mm/swap: skip reader rotation for single-device " Lian Wang
2026-11-20  4:38   ` Kunwu Chan
2026-11-14 14:52 ` [RFC PATCH v4 18/18] mm/swap: redistribute queue readers after membership changes Lian Wang
2026-11-16  3:29   ` Kairui Song
2026-11-20  4:38   ` Kunwu Chan
2026-11-16  3:52 ` [RFC PATCH v4 00/18] mm/swap: introduce priority queues for swap device allocation Kairui Song
2026-11-16 11:10   ` Lian Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4f98fc9098d6a674f279ed2325f3426f01172b04@linux.dev \
    --to=kunwu.chan@linux.dev \
    --cc=Kunwu.chan@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=baohua@kernel.org \
    --cc=baoquan.he@linux.dev \
    --cc=chrisl@kernel.org \
    --cc=gustavoars@kernel.org \
    --cc=kasong@tencent.com \
    --cc=kees@kernel.org \
    --cc=lianux.mm@gmail.com \
    --cc=linjh22s@gmail.com \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=nphamcs@gmail.com \
    --cc=shikemeng@huaweicloud.com \
    --cc=tglx@kernel.org \
    --cc=youngjun.park@lge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox