Re: [PATCH 11/11] power: supply: qcom_smbx: program aicl rerun time

[Casey Connolly <casey.connolly@linaro.org>]

On 6/20/25 19:00, Konrad Dybcio wrote:
> On 6/19/25 4:55 PM, Casey Connolly wrote:
>> We don't know what the bootloader programmed here, but we want to have a
>> consistent value. Program the automatic input current limit detection to
>> re-run every 3 seconds. This seems to be necessary at least for smb5.
>>
>> Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
>> ---
>>   drivers/power/supply/qcom_smbx.c | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/power/supply/qcom_smbx.c b/drivers/power/supply/qcom_smbx.c
>> index d902f3f43548191d3d0310ce90e699918ed0f16f..b723dba5b86daefb238ee6aae19b1b7e5236fce3 100644
>> --- a/drivers/power/supply/qcom_smbx.c
>> +++ b/drivers/power/supply/qcom_smbx.c
>> @@ -1091,8 +1091,14 @@ static int smb_probe(struct platform_device *pdev)
>>   	if (rc < 0)
>>   		return dev_err_probe(chip->dev, rc,
>>   				     "Couldn't write fast charge current cfg");
>>   
>> +	rc = regmap_write_bits(chip->regmap, chip->base + AICL_RERUN_TIME_CFG,
>> +			       AICL_RERUN_TIME_MASK, AIC_RERUN_TIME_3_SECS);
> 
> FWIW a random downstream clone I have sets 0x01 which is claimed to
> mean "every 12s" instead

hmm I saw that too, I think more documentation would be needed to 
understand this properly (I'm not exactly clear on what this actually 
means, when the AICL would re-run, etc).

I have reports that this works ok, so I'd just leave it unless we have 
info to suggest otherwise.

> 
> Konrad
-- 
Casey (she/they)