Linux Hardening
 help / color / mirror / Atom feed
From: "Guozihua (Scott)" <guozihua@huawei.com>
To: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: <linux-integrity@vger.kernel.org>, <zohar@linux.ibm.com>,
	<dmitry.kasatkin@gmail.com>, <linux-hardening@vger.kernel.org>
Subject: Re: [RESEND] evm: Refector struct evm_xattr
Date: Wed, 25 May 2022 09:50:16 +0800	[thread overview]
Message-ID: <61ffe974-8e15-6682-d53a-90df89dcb28a@huawei.com> (raw)
In-Reply-To: <20220518051326.GB16144@embeddedor>

On 2022/5/18 13:13, Gustavo A. R. Silva wrote:
> On Wed, May 18, 2022 at 09:14:39AM +0800, GUO Zihua wrote:
>> struct evm_xattr is only used for EVM_XATTR_HMAC type evm digest and is
>> glued together one flexible array and one fixed length array. The
>> original intention seems to be shortening the code as the "data" field
>> would always be a SHA1 digest.
>>
>> This implementation is not complying with GCC's specification about
>> flexible array and spars yield the following warning:
> 
> The sparse warning has nothing to do with any GCC specification. It's
> perfectly fine to apply the sizeof operator to a struct-with-flex-array.
> However, it might be suspicious if the intention is to also get the
> _dynamic_ size of the flexible array, because in that case the size of
> the flex array is always zero. See the example below:
> 
> 	struct foo {
> 		uint8_t len;
> 		struct boo data[];
> 	};
> 
> 	sizeof(struct foo) == 1
> 
> Also, you sent this patch twice in the last 24 hours. Give the maintainers
> time to review your patch (usually a couple of weeks) before resending it.
> 
>>
>> security/integrity/evm/evm_main.c:852:30: warning: using sizeof on a flexible
>> structure
>> security/integrity/evm/evm_main.c:862:32: warning: using sizeof on a flexible
>> structure
> 
> Regarding the warnings above, please take a look at my response to your
> other patch (the same applies in this case). :)
> 
> Thanks
> --
> Gustavo
> 
>>
>> Fix it by:
>> 1. Remove struct evm_xattr and use struct evm_ima_xattr_data directly.
>> 2. Get array size with struct_size instead of sizeof.
>>
>> Reference: https://github.com/KSPP/linux/issues/174
>>
>> Fixes: 6be5cc5246f80 ("evm: add support for different security.evm data types")
>> Signed-off-by: GUO Zihua <guozihua@huawei.com>
>> ---
>>   security/integrity/evm/evm_main.c | 14 ++++++++------
>>   security/integrity/integrity.h    |  6 ------
>>   2 files changed, 8 insertions(+), 12 deletions(-)
>>
>> diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c
>> index 7d87772f0ce6..f2c4501a287a 100644
>> --- a/security/integrity/evm/evm_main.c
>> +++ b/security/integrity/evm/evm_main.c
>> @@ -211,7 +211,8 @@ static enum integrity_status evm_verify_hmac(struct dentry *dentry,
>>   	/* check value type */
>>   	switch (xattr_data->type) {
>>   	case EVM_XATTR_HMAC:
>> -		if (xattr_len != sizeof(struct evm_xattr)) {
>> +		if (xattr_len != struct_size(*xattr_data, data,
>> +					     SHA1_DIGEST_SIZE)) {
>>   			evm_status = INTEGRITY_FAIL;
>>   			goto out;
>>   		}
>> @@ -842,24 +843,25 @@ int evm_inode_init_security(struct inode *inode,
>>   				 const struct xattr *lsm_xattr,
>>   				 struct xattr *evm_xattr)
>>   {
>> -	struct evm_xattr *xattr_data;
>> +	struct evm_ima_xattr_data *xattr_data;
>>   	int rc;
>>   
>>   	if (!(evm_initialized & EVM_INIT_HMAC) ||
>>   	    !evm_protected_xattr(lsm_xattr->name))
>>   		return 0;
>>   
>> -	xattr_data = kzalloc(sizeof(*xattr_data), GFP_NOFS);
>> +	xattr_data = kzalloc(struct_size(*xattr_data, data,
>> +			     SHA1_DIGEST_SIZE), GFP_NOFS);
>>   	if (!xattr_data)
>>   		return -ENOMEM;
>>   
>> -	xattr_data->data.type = EVM_XATTR_HMAC;
>> -	rc = evm_init_hmac(inode, lsm_xattr, xattr_data->digest);
>> +	xattr_data->type = EVM_XATTR_HMAC;
>> +	rc = evm_init_hmac(inode, lsm_xattr, xattr_data->data);
>>   	if (rc < 0)
>>   		goto out;
>>   
>>   	evm_xattr->value = xattr_data;
>> -	evm_xattr->value_len = sizeof(*xattr_data);
>> +	evm_xattr->value_len = struct_size(*xattr_data, data, SHA1_DIGEST_SIZE);
>>   	evm_xattr->name = XATTR_EVM_SUFFIX;
>>   	return 0;
>>   out:
>> diff --git a/security/integrity/integrity.h b/security/integrity/integrity.h
>> index 3510e413ea17..91b16d620dd9 100644
>> --- a/security/integrity/integrity.h
>> +++ b/security/integrity/integrity.h
>> @@ -86,12 +86,6 @@ struct evm_ima_xattr_data {
>>   	u8 data[];
>>   } __packed;
>>   
>> -/* Only used in the EVM HMAC code. */
>> -struct evm_xattr {
>> -	struct evm_ima_xattr_data data;
>> -	u8 digest[SHA1_DIGEST_SIZE];
>> -} __packed;
>> -
>>   #define IMA_MAX_DIGEST_SIZE	64
>>   
>>   struct ima_digest_data {
>> -- 
>> 2.36.0
>>
> .
Thanks Gustavo!

I'm still pretty new to the community so your feedback is much appreciated!

-- 
Best
GUO Zihua

      reply	other threads:[~2022-05-25  1:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-18  1:14 [RESEND] evm: Refector struct evm_xattr GUO Zihua
2022-05-18  5:13 ` Gustavo A. R. Silva
2022-05-25  1:50   ` Guozihua (Scott) [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=61ffe974-8e15-6682-d53a-90df89dcb28a@huawei.com \
    --to=guozihua@huawei.com \
    --cc=dmitry.kasatkin@gmail.com \
    --cc=gustavoars@kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox