Linux Hexagon architecture development
 help / color / mirror / Atom feed
From: Nicolas Pitre <nico@fluxnic.net>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
	Samuel Ortiz <sameo@linux.intel.com>,
	David Brown <davidb@codeaurora.org>,
	Greg KH <gregkh@linuxfoundation.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Richard Kuo <rkuo@codeaurora.org>,
	linux-hexagon@vger.kernel.org
Subject: Re: MFD: move ssbi driver into drivers/mfd
Date: Mon, 29 Apr 2013 18:48:34 -0400 (EDT)	[thread overview]
Message-ID: <alpine.LFD.2.03.1304291848080.17372@syhkavp.arg> (raw)
In-Reply-To: <201304300000.19488.arnd@arndb.de>

On Tue, 30 Apr 2013, Arnd Bergmann wrote:

> There is no reason for ssbi to have its own top-level driver directory
> when the only users of this interface are all MFD drivers. The only
> mainline driver using it at the moment (PM8921) is marked broken and in
> fact does not compile. I have verified that fixing the trivial build
> breakage in pm8921 links in the new ssbi code just fine, but that
> can be a separate patch.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Samuel Ortiz <sameo@linux.intel.com>

Acked-by: Nicolas Pitre <nico@linaro.org>


> ---
>  drivers/Kconfig              |  2 --
>  drivers/Makefile             |  1 -
>  drivers/mfd/Kconfig          |  3 ++-
>  drivers/mfd/Makefile         |  2 +-
>  drivers/{ssbi => mfd}/ssbi.c |  0
>  drivers/ssbi/Kconfig         | 16 ----------------
>  drivers/ssbi/Makefile        |  1 -
>  7 files changed, 3 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index 78a956e..202fa6d 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -52,8 +52,6 @@ source "drivers/i2c/Kconfig"
>  
>  source "drivers/spi/Kconfig"
>  
> -source "drivers/ssbi/Kconfig"
> -
>  source "drivers/hsi/Kconfig"
>  
>  source "drivers/pps/Kconfig"
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 33360de..3c200a2 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -114,7 +114,6 @@ obj-y				+= firmware/
>  obj-$(CONFIG_CRYPTO)		+= crypto/
>  obj-$(CONFIG_SUPERH)		+= sh/
>  obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
> -obj-$(CONFIG_SSBI)		+= ssbi/
>  ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
>  obj-y				+= clocksource/
>  endif
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ca86581..5150833 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -991,7 +991,8 @@ config MFD_PM8XXX
>  
>  config MFD_PM8921_CORE
>  	tristate "Qualcomm PM8921 PMIC chip"
> -	depends on SSBI && BROKEN
> +	depends on (ARCH_MSM || HEXAGON)
> +	depends on BROKEN
>  	select MFD_CORE
>  	select MFD_PM8XXX
>  	help
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index b90409c..3b95b47 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -133,7 +133,7 @@ obj-$(CONFIG_MFD_VX855)		+= vx855.o
>  obj-$(CONFIG_MFD_WL1273_CORE)	+= wl1273-core.o
>  obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
>  obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o omap-usb-tll.o
> -obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
> +obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o ssbi.o
>  obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
>  obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
>  obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
> diff --git a/drivers/ssbi/ssbi.c b/drivers/mfd/ssbi.c
> similarity index 100%
> rename from drivers/ssbi/ssbi.c
> rename to drivers/mfd/ssbi.c
> diff --git a/drivers/ssbi/Kconfig b/drivers/ssbi/Kconfig
> deleted file mode 100644
> index 1ae4040a..0000000
> --- a/drivers/ssbi/Kconfig
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#
> -# SSBI bus support
> -#
> -
> -menu "Qualcomm MSM SSBI bus support"
> -
> -config SSBI
> -	tristate "Qualcomm Single-wire Serial Bus Interface (SSBI)"
> -	help
> -	  If you say yes to this option, support will be included for the
> -	  built-in SSBI interface on Qualcomm MSM family processors.
> -
> -	  This is required for communicating with Qualcomm PMICs and
> -	  other devices that have the SSBI interface.
> -
> -endmenu
> diff --git a/drivers/ssbi/Makefile b/drivers/ssbi/Makefile
> deleted file mode 100644
> index 38fb70c..0000000
> --- a/drivers/ssbi/Makefile
> +++ /dev/null
> @@ -1 +0,0 @@
> -obj-$(CONFIG_SSBI) += ssbi.o
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

  parent reply	other threads:[~2013-04-29 22:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20130429162115.GA6893@kroah.com>
     [not found] ` <CA+55aFwU-bXZ7wn2dOcLNfPMcjDv3Jvqx_LTt7B+-tj4WcP8Mg@mail.gmail.com>
     [not found]   ` <CA+55aFzLtBwsvVrnT2DrUOU+eYrQ5eiKeamRb4Y5+-TVgbuM5Q@mail.gmail.com>
     [not found]     ` <201304292154.15920.arnd@arndb.de>
     [not found]       ` <CA+55aFzefpRz2Y8oW9q0ArrR=XW0POBhy8NSNJ3DrCh9EowLqg@mail.gmail.com>
2013-04-29 21:08         ` [GIT PATCH] char/misc patches for 3.10-rc1 David Brown
2013-04-29 21:16           ` Arnd Bergmann
2013-05-01 16:13             ` Mark Brown
2013-05-02 20:53               ` David Brown
2013-05-03  8:06                 ` Mark Brown
2013-04-29 21:18           ` Linus Torvalds
2013-04-29 21:29             ` Arnd Bergmann
2013-04-29 22:00             ` MFD: move ssbi driver into drivers/mfd Arnd Bergmann
2013-04-29 22:10               ` Greg KH
2013-04-29 22:48               ` Nicolas Pitre [this message]
2013-04-30  0:00               ` David Brown
2013-04-30 10:18               ` Samuel Ortiz
2013-04-30 10:26                 ` Arnd Bergmann
2013-05-16  9:49               ` Samuel Ortiz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.03.1304291848080.17372@syhkavp.arg \
    --to=nico@fluxnic.net \
    --cc=akpm@linux-foundation.org \
    --cc=arnd@arndb.de \
    --cc=davidb@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-hexagon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rkuo@codeaurora.org \
    --cc=sameo@linux.intel.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox