From: "Panayiotis Fafakos" <pfafakos@yahoo.gr>
To: linux-hotplug@vger.kernel.org
Subject: Netmod support
Date: Wed, 23 Feb 2005 05:57:08 +0000 [thread overview]
Message-ID: <000e01c5196c$84da7980$0201a8c0@computer> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1973 bytes --]
Dear members of the linux-hotplug project,
I would like to add a usb device that acts as an ISDN modem to the hotplug system.
Till now there is no driver that claims the device, although the usb system see's it.
I have included the output from `cat /proc/bus/usb/devices` for the specified device.
(Taken from my system with the netmod connected in a USB port)
(Kernel 2.6.8-2)
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0bf1 ProdID=0001 Rev= 1.00
S: Manufacturer=Intracom S.A.
S: Product=NetMod USB
S: SerialNumber=Firmware Ver 1.0
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Below is the output I should have according to the manual.
(Taken from the netmod installation manual)
(Kernel 2.2.X)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0bf1 ProdID=0001 Rev= 1.00
S: Manufacturer=Intracom S.A.
S: Product=NetMod USB
S: SerialNumber=Firmware Ver 1.0
C:* #Ifs= 2 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 10ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 10ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 10ms
I am running GNU/Debian Linux taken from the testing distribution (shortly sarge) downloaded a week ago.
Further inforamtion on the device can be found in
http://netmod.intracom.gr/pdf/pdf_engl/usb_linux_22x_en.pdf
Could somebody give me a hint?
Kind regards,
Fafakos Panayiotis.
[-- Attachment #1.2: Type: text/html, Size: 3827 bytes --]
[-- Attachment #2: netmod.txt --]
[-- Type: text/plain, Size: 1274 bytes --]
(Taken from my system with the netmod connected in a USB port)
(Kernel 2.6.8-2)
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0bf1 ProdID=0001 Rev= 1.00
S: Manufacturer=Intracom S.A.
S: Product=NetMod USB
S: SerialNumber=Firmware Ver 1.0
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
(Taken from the netmod installation manual)
(Kernel 2.2.X)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0bf1 ProdID=0001 Rev= 1.00
S: Manufacturer=Intracom S.A.
S: Product=NetMod USB
S: SerialNumber=Firmware Ver 1.0
C:* #Ifs= 2 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 10ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 10ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 10ms
next reply other threads:[~2005-02-23 5:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-23 5:57 Panayiotis Fafakos [this message]
2005-02-23 11:08 ` Netmod support Kay Sievers
2005-02-23 18:56 ` Panayiotis Fafakos
2005-02-26 0:49 ` Kay Sievers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000e01c5196c$84da7980$0201a8c0@computer' \
--to=pfafakos@yahoo.gr \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).