From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kay Sievers Date: Sun, 07 Mar 2004 14:05:54 +0000 Subject: Re: udev problems Message-Id: <1078668353.1170.23.camel@pim> List-Id: References: <200403071315.02925.michal@cihar.com> In-Reply-To: <200403071315.02925.michal@cihar.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-hotplug@vger.kernel.org On Sun, 2004-03-07 at 14:49, Michal =C8iha=F8 wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 >=20 > On Sunday 07 of March 2004 14:44, Kay Sievers wrote: > > I just reply to all and do not edit the mail header. >=20 > I just reply to list :-) >=20 > > > > So your choice is to dis-/reconnect for partition update > > > > > > This doesn't work, it doesn't report partiotions even if card inserted > > > while connecting. > > > > Are the partitons in /sys ? > > Something like /sys/block/sda/sda1/ ? >=20 > No they're not there until I read from /dev/sda* No idea. My partitions are found. Whats in dmesg? I have the following for my cheap 4slot-reader: USB Mass Storage device found at 3 usb 1-3: USB disconnect, address 3 usb 1-3: new high speed USB device using address 4 scsi2 : SCSI emulation for USB Mass Storage devices Vendor: Zynet Model: USB Storage-SMC Rev: I03A Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 Vendor: Zynet Model: USB Storage-CFC Rev: I03A Type: Direct-Access ANSI SCSI revision: 02 sdb: Spinning up disk....ready SCSI device sdb: 31360 512-byte hdwr sectors (16 MB) sdb: assuming Write Enabled sdb: assuming drive cache: write through sdb: sdb1 sdb2 sdb3 sdb4 Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 1, type 0 Vendor: Zynet Model: USB Storage-MMC Rev: I03A Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 2, type 0 Vendor: Zynet Model: USB Storage-MSC Rev: I03A Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3 Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 3, type 0 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 4 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id638&op=CCk _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel