From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kay Sievers Date: Mon, 10 May 2004 02:05:51 +0000 Subject: Re: how to rename network interface? Message-Id: <1084154750.2757.108.camel@pim> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Sun, 2004-05-09 at 14:24 -0400, mikep wrote: > Using udev-025 i am trying to rename eth0 with these rules in 50-udev.rules: > > BUS="pci", SYSFS{device}="0x8169", NAME="eth0" > BUS="pci", SYSFS{device}="0x8139", NAME="eth1" What does udevinfo show? udevinfo -p /class/net/eth0 -a > udev-logging doesn't show any errors. You need to compile it with 'make DEBUG=true' to get a very detailed log. good luck, Kay ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel