From: Davide Monge <davide.monge@poste.it>
To: linux-hotplug@vger.kernel.org
Subject: Trouble managing Trust WebCam
Date: Thu, 18 Nov 2004 16:29:46 +0000 [thread overview]
Message-ID: <1100795386.7474.13.camel@toth> (raw)
[-- Attachment #1: Type: text/plain, Size: 4750 bytes --]
Hi,
While plugging a "Trust 150 Spacecam portable" into a usb2.0 port, this
is the
"tail -f /var/log/messages":
Nov 18 17:10:26 toth kernel: ohci_hcd 0000:02:00.1: wakeup
Nov 18 17:10:26 toth kernel: usb 5-1: new full speed USB device using
address 3
Nov 18 17:10:26 toth kernel: usb 5-1: SN9C10[12] PC Camera Controller
detected (vid/pid 0x0C45/0x6029)
Nov 18 17:10:26 toth kernel: usb 5-1: PAS106B image sensor detected
Nov 18 17:10:27 toth kernel: usb 5-1: Initialization succeeded
Nov 18 17:10:27 toth kernel: usb 5-1: V4L2 device registered
as /dev/video0
Nov 18 17:10:32 toth wait_for_sysfs[7308]: either wait_for_sysfs (udev
044) needs an update to handle the device '/class/video4linux/video0'
properly (no device symlink) or the sysfs-support of your device's
driver needs to be fixed, please report to
<linux-hotplug-devel@lists.sourceforge.net>
My system:
kernel 2.6.8.1-20mdk
fs: reiserFS
cpu: PIII 1GHz 512Mb ram
Output for hdparm:
[root@toth dev]# hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 38760/16/63, sectors = 20003880960, start = 0
Presence of dev:
lrwxrwxrwx 1 root root 6 Nov 18 17:10 video -> video0
crw-rw---- 1 davide video 81, 0 Nov 18 17:10 video0
Output of lsmod:
Module Size Used by
i830 74516 2
nfsd 189408 8
exportfs 4736 1 nfsd
lockd 58344 2 nfsd
sunrpc 127652 2 nfsd,lockd
md5 3584 1
ipv6 230916 14
nls_cp437 5312 3
snd-seq-oss 31232 0
snd-seq-midi-event 6080 1 snd-seq-oss
snd-seq 47440 4 snd-seq-oss,snd-seq-midi-event
snd-pcm-oss 49480 0
snd-mixer-oss 17376 1 snd-pcm-oss
snd-intel8x0 30124 0
snd-ac97-codec 69392 1 snd-intel8x0
snd-pcm 81800 2 snd-pcm-oss,snd-intel8x0
snd-timer 20356 2 snd-seq,snd-pcm
snd-page-alloc 7400 2 snd-intel8x0,snd-pcm
gameport 3328 1 snd-intel8x0
snd-mpu401-uart 5856 1 snd-intel8x0
snd-rawmidi 19300 1 snd-mpu401-uart
snd-seq-device 6344 3 snd-seq-oss,snd-seq,snd-rawmidi
snd 45988 11
snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device
soundcore 7008 1 snd
sn9c102 54280 0
videodev 7168 1 sn9c102
usb-storage 65504 3
af_packet 16072 2
ehci-hcd 26244 0
ohci-hcd 18468 0
ds 17572 4
yenta_socket 18624 2
pcmcia_core 59972 2 ds,yenta_socket
thermal 9928 0
tc1100-wmi 5028 0
processor 13736 1 thermal
fan 2756 0
button 4624 0
battery 7044 0
ac 3204 0
eth1394 17000 0
e100 28160 0
mii 4224 1 e100
ide-cd 37280 0
cdrom 37724 1 ide-cd
ohci1394 30788 0
ieee1394 292056 2 eth1394,ohci1394
loop 12520 0
nls_iso8859-1 3680 4
ntfs 147964 1
sd_mod 19232 4
vfat 11008 3
fat 39776 1 vfat
intel-agp 19584 1
agpgart 27752 4 intel-agp
nvram 6856 0
sg 33788 0
scsi_mod 104044 3 usb-storage,sd_mod,sg
joydev 8032 0
evdev 7648 1
tsdev 5824 0
usbmouse 4256 0
usbhid 41088 0
uhci-hcd 28752 0
usbcore 103172 9
sn9c102,usb-storage,ehci-hcd,ohci-hcd,usbmouse,usbhid,uhci-hcd
genrtc 7444 0
reiserfs 258324 1
Relevant output in dmesg:
........
ohci_hcd 0000:02:00.1: wakeup
usb 5-1: new full speed USB device using address 3
usb 5-1: SN9C10[12] PC Camera Controller detected (vid/pid
0x0C45/0x6029)
usb 5-1: PAS106B image sensor detected
usb 5-1: Initialization succeeded
usb 5-1: V4L2 device registered as /dev/video0
Launching Gnomemeeting, all fails in core dumping.
Any idea?
Thanx!
Dav
--
Davide Monge
cell: 349 6205515
---------------------
Key fingerprint = 6AB9 E2B9 C54E 8579 B4AE AD4C 3BA5
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2004-11-18 16:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-18 16:29 Davide Monge [this message]
2004-11-18 17:30 ` Trouble managing Trust WebCam Kay Sievers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1100795386.7474.13.camel@toth \
--to=davide.monge@poste.it \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).