From: Milu <milu@data.pl>
To: linux-hotplug@vger.kernel.org
Subject: Re: /block/uba - not working - syslog error
Date: Sat, 20 Nov 2004 15:33:28 +0000 [thread overview]
Message-ID: <1100964808.5221.9.camel@snife.dyndns.org> (raw)
In-Reply-To: <1100959547.10181.10.camel@snife.dyndns.org>
[-- Attachment #1: Type: text/plain, Size: 3087 bytes --]
Dnia 20-11-2004, sob o godzinie 15:13 +0100, Kay Sievers napisał(a):
> On Sat, 2004-11-20 at 15:05 +0100, Milu wrote:
> > I'm trying to connect USB 2.0 Multi-Slots 6-in-1 card reader to my
> > computer usb1.1 port(usb version doesn't matter in this case) and I've
> > got this message in syslog
>
> The up driver does not support multi-lun devices as far as I know. You
> may try the usb-storage module for that device.
>
Well, I've got usb-storage compiled into my kernel.
> > Nov 20 14:34:00 snife wait_for_sysfs[9477]: either wait_for_sysfs (udev
> > 045) needs an update to handle the device
> > '/devices/pci0000:00/0000:00:05.2/usb1/1-2/1-2:1.0' properly (no bus
> > device link) or the sysfs-support of your device's driver needs to be
> > fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
> > Nov 20 14:34:00 snife wait_for_sysfs[9485]: either wait_for_sysfs (udev
> > 045) needs an update to handle the device '/block/uba' properly (no bus
> > device link) or the sysfs-support of your device's driver needs to be
> > fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
>
> How does "ls -l /sys/bus/usb/devices/" look?
>
When I insert Transcend USB Flash Drive I have:
Nov 20 16:20:28 snife wait_for_sysfs[4973]: either wait_for_sysfs (udev
045) needs an update to handle the device '/devices/pci0000:
00/0000:00:05.2/usb1/1-2/1-2:1.0' properly (no bus device link) or the
sysfs-support of your device's driver needs to be fixed, plea
se report to <linux-hotplug-devel@lists.sourceforge.net>
Nov 20 16:20:30 snife wait_for_sysfs[4985]: either wait_for_sysfs (udev
045) needs an update to handle the device '/block/uba' prope
rly (no bus device link) or the sysfs-support of your device's driver
needs to be fixed, please report to <linux-hotplug-devel@lists
.sourceforge.net>
Nov 20 16:20:30 snife udev[5007]: creating device node '/dev/uba'
snife ~ # ls -l /sys/bus/usb/devices/
razem 0
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-0:1.0
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-0:1.0
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-1
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-1
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-1:1.0
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-1/1-1:1.0
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-1:1.1
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-1/1-1:1.1
lrwxrwxrwx 1 root root 0 lis 20 16:20 1-2
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-2
lrwxrwxrwx 1 root root 0 lis 20 16:20 1-2:1.0
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-2/1-2:1.0
lrwxrwxrwx 1 root root 0 lis 20 16:19 usb1
-> ../../../devices/pci0000:00/0000:00:05.2/usb1
The Kingston DataTraveler works fine Transcend not :/
It doesn't matter without restart or with restart - situation with Flash
Drive is the same but restart was partialy helpful for multicard reader
- it doesnt claim about this syslog message
So for now I should wait for udev handling multi lun devices?
Thanks,
Milu
--
Pozdrawiam / Best Regards
Maciej Milewski
[-- Attachment #2: To jest część listu podpisana cyfrowo --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2004-11-20 15:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-20 14:05 /block/uba - not working - syslog error Milu
2004-11-20 14:13 ` Kay Sievers
2004-11-20 15:33 ` Milu [this message]
2004-11-20 15:53 ` Kay Sievers
2004-11-20 22:27 ` Milu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1100964808.5221.9.camel@snife.dyndns.org \
--to=milu@data.pl \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).