From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kay Sievers Date: Thu, 20 Jan 2005 20:47:16 +0000 Subject: Re: linmodem & fedora 3 Message-Id: <1106254036.3573.23.camel@localhost.localdomain> List-Id: References: <007301c4ff21$5ece7990$0201a8c0@desktop> In-Reply-To: <007301c4ff21$5ece7990$0201a8c0@desktop> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: linux-hotplug@vger.kernel.org On Fri, 2005-01-21 at 05:53 +1100, Phill wrote: > I'm told this is the place to discuss udev issues >=20 > I have a lucent winmodem and am having problems after a reboot. > =20 > I have tested the modem post install and everything seems to be ok. > However, /dev/ttyLT0 and /dev/modem exist on the system until a reboot >=20 > I have tried to install using the rpm and compiling from the source =E2= =80=93 same > results > =20 > Can anybody please put tell me how to configure udev appropriately? What exactly is the problem? Are the nodes for your device not created or is the device not working as you expect. udev creates/removes only device nodes and does nothing else with your hardware and there is probably nothing you need to configure on the udev side. Kay ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel