'no bus device link' error with usb hard drive

'no bus device link' error with usb hard drive

[Bjorn Elfstrom]

Hello,

I spotted an error message in the /var/log/messages when I was looking 
for clues how to change a USB disk fstab-sync properties (permissions 
and mount point). The message concluded with a request to report it to 
this list.

Here are the hopefully relevant lines:

-----------------------------------------------------------------
Feb  8 20:09:19 localhost kernel: usb 1-6: new high speed USB device 
using address 13
Feb  8 20:09:19 localhost kernel: scsi11 : SCSI emulation for USB Mass 
Storage devices
Feb  8 20:09:24 localhost wait_for_sysfs[14575]: either wait_for_sysfs 
(udev 039) needs an update to handle the device 
'/devices/pci0000:00/0000:00:0a.3/usb1/1-6/1-6:1.0' properly (no bus 
device link) or the sysfs-support of your device's driver needs to be 
fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
Feb  8 20:09:31 localhost kernel:   Vendor: SAMSUNG   Model: SP1604N 
        Rev:  0 0
Feb  8 20:09:31 localhost kernel:   Type:   Direct-Access 
        ANSI SCSI revision: 02
Feb  8 20:09:31 localhost kernel: SCSI device sda: 312581808 512-byte 
hdwr sectors (160042 MB)
Feb  8 20:09:31 localhost kernel: sda: assuming drive cache: write through
Feb  8 20:09:31 localhost kernel:  sda: sda1
Feb  8 20:09:31 localhost kernel: Attached scsi disk sda at scsi11, 
channel 0, id 0, lun 0
Feb  8 20:09:32 localhost scsi.agent[14628]: disk at 
/devices/pci0000:00/0000:00:0a.3/usb1/1-6/1-6:1.0/host11/11:0:0:0
Feb  8 20:09:35 localhost fstab-sync[14705]: added mount point 
/media/usbdisk1 for /dev/sda1
----------------------------------------------------------

Regards,

.björn




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: 'no bus device link' error with usb hard drive

[Kay Sievers]

On Tue, 2005-02-08 at 20:21 +0200, Bjorn Elfstrom wrote:
> Hello,
> 
> I spotted an error message in the /var/log/messages when I was looking 
> for clues how to change a USB disk fstab-sync properties (permissions 
> and mount point). The message concluded with a request to report it to 
> this list.

You may update to a later version of udev which will not print this, or
if possible get a 2.6.10 kernel which should not cause this problem.

Kay



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel