hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
usb usb2: suspend_rh (auto-stop)
usb usb7: usb resume
ehci_hcd 0000:00:1a.7: resume root hub
ehci_hcd 0000:00:1a.7: port 3 full speed --> companion
ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
usb usb2: wakeup_rh (auto-start)
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 7-0:1.0: hub_resume
ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 2-1: new full speed USB device using uhci_hcd and address 62
usb 2-1: uevent
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: uevent
hub 2-1:1.0: usb_probe_interface
hub 2-1:1.0: usb_probe_interface - got id
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
hub 2-1:1.0: compound device; port removable status: FFRRRR
hub 2-1:1.0: individual port power switching
hub 2-1:1.0: individual port over-current protection
hub 2-1:1.0: Port indicators are supported
hub 2-1:1.0: power on to power good time: 100ms
hub 2-1:1.0: local power source is good
hub 2-1:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '062'
usb 2-1: New USB device found, idVendor=1608, idProduct=0184
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-0:1.0: state 7 ports 6 chg 0000 evt 0000
uhci_hcd 0000:00:1a.1: reserve dev 62 ep81-INT, period 128, phase 0, 12 us
hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0000
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend
ehci_hcd 0000:00:1a.7: suspend root hub
hub 2-1:1.0: hub_suspend
uhci_hcd 0000:00:1a.1: release dev 62 ep81-INT, period 128, phase 0, 12 us
usb 2-1: usb auto-suspend
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
usb usb2: suspend_rh
usb usb2: usb resume
usb usb2: wakeup_rh
hub 2-0:1.0: hub_resume
uhci_hcd 0000:00:1a.1: port 1 portsc 0095,01
hub 2-0:1.0: port 1: status 0103 change 0004
hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
uhci_hcd 0000:00:1a.1: port 1 portsc 0095,01
usb 2-1: usb wakeup-resume
usb 2-1: finish resume
hub 2-1:1.0: hub_resume
hub 2-1:1.0: port 1: status 0101 change 0001
hub 2-1:1.0: port 2: status 0101 change 0001
uhci_hcd 0000:00:1a.1: reserve dev 62 ep81-INT, period 128, phase 0, 12 us
hub 2-0:1.0: resume on port 1, status 0
hub 2-0:1.0: port 1, status 0103, change 0004, 12 Mb/s
hub 2-1:1.0: state 7 ports 6 chg 0006 evt 0000
hub 2-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
usb 2-1.1: new full speed USB device using uhci_hcd and address 63
hub 2-1:1.0: port 1 not reset yet, waiting 10ms
usb 2-1.1: ep0 maxpacket = 8
usb 2-1.1: uevent
usb 2-1.1: usb_probe_device
usb 2-1.1: configuration #1 chosen from 1 choice
usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0)
usb 2-1.1:1.0: uevent
hub 2-1.1:1.0: usb_probe_interface
hub 2-1.1:1.0: usb_probe_interface - got id
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 4 ports detected
hub 2-1.1:1.0: compound device; port removable status: FFFF
hub 2-1.1:1.0: individual port power switching
hub 2-1.1:1.0: individual port over-current protection
hub 2-1.1:1.0: power on to power good time: 0ms
hub 2-1.1:1.0: local power source is good
hub 2-1.1:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '063'
usb 2-1.1: New USB device found, idVendor=1608, idProduct=02c7
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
hub 2-1:1.0: port 2 not reset yet, waiting 10ms
usb 2-1.2: new full speed USB device using uhci_hcd and address 64
hub 2-1.1:1.0: port 1: status 0101 change 0001
hub 2-1.1:1.0: port 2: status 0101 change 0001
hub 2-1.1:1.0: port 3: status 0101 change 0001
hub 2-1.1:1.0: port 4: status 0101 change 0001
hub 2-1:1.0: port 2 not reset yet, waiting 10ms
uhci_hcd 0000:00:1a.1: reserve dev 63 ep81-INT, period 128, phase 0, 12 us
usb 2-1.2: ep0 maxpacket = 8
usb 2-1.2: uevent
usb 2-1.2: usb_probe_device
usb 2-1.2: configuration #1 chosen from 1 choice
usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0)
usb 2-1.2:1.0: uevent
hub 2-1.2:1.0: usb_probe_interface
hub 2-1.2:1.0: usb_probe_interface - got id
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
hub 2-1.2:1.0: compound device; port removable status: FFFF
hub 2-1.2:1.0: individual port power switching
hub 2-1.2:1.0: individual port over-current protection
hub 2-1.2:1.0: power on to power good time: 0ms
hub 2-1.2:1.0: local power source is good
hub 2-1.2:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '064'
usb 2-1.2: New USB device found, idVendor=1608, idProduct=02c7
usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0002
hub 2-1.1:1.0: state 7 ports 4 chg 001e evt 0000
hub 2-1.1:1.0: port 1, status 0101, change 0000, 12 Mb/s
usb 2-1.1.1: new full speed USB device using uhci_hcd and address 65
hub 2-1.2:1.0: port 1: status 0101 change 0001
hub 2-1.2:1.0: port 2: status 0101 change 0001
hub 2-1.2:1.0: port 3: status 0101 change 0001
hub 2-1.2:1.0: port 4: status 0101 change 0001
usb 2-1.1.1: ep0 maxpacket = 8
uhci_hcd 0000:00:1a.1: reserve dev 64 ep81-INT, period 128, phase 0, 12 us
usb 2-1.1.1: default language 0x0409
usb 2-1.1.1: uevent
usb 2-1.1.1: usb_probe_device
usb 2-1.1.1: configuration #1 chosen from 1 choice
usb 2-1.1.1: adding 2-1.1.1:1.0 (config #1, interface 0)
usb 2-1.1.1:1.0: uevent
usbserial_generic 2-1.1.1:1.0: usb_probe_interface
usbserial_generic 2-1.1.1:1.0: usb_probe_interface - got id
io_ti 2-1.1.1:1.0: usb_probe_interface
io_ti 2-1.1.1:1.0: usb_probe_interface - got id
io_ti 2-1.1.1:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.1.1: Edgeport TI 2 port adapter converter now attached to ttyUSB0
usb 2-1.1.1: Edgeport TI 2 port adapter converter now attached to ttyUSB1
drivers/usb/core/inode.c: creating file '065'
usb 2-1.1.1: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.1: Product: Edgeport/416
usb 2-1.1.1: Manufacturer: Digi International
usb 2-1.1.1: SerialNumber: V70008669-0
hub 2-1.1:1.0: port 2, status 0101, change 0000, 12 Mb/s
usb 2-1.1.2: new full speed USB device using uhci_hcd and address 66
usb 2-1.1.2: ep0 maxpacket = 8
usb 2-1.1.2: default language 0x0409
usb 2-1.1.2: uevent
usb 2-1.1.2: usb_probe_device
usb 2-1.1.2: configuration #1 chosen from 1 choice
usb 2-1.1.2: adding 2-1.1.2:1.0 (config #1, interface 0)
usb 2-1.1.2:1.0: uevent
usbserial_generic 2-1.1.2:1.0: usb_probe_interface
usbserial_generic 2-1.1.2:1.0: usb_probe_interface - got id
io_ti 2-1.1.2:1.0: usb_probe_interface
io_ti 2-1.1.2:1.0: usb_probe_interface - got id
io_ti 2-1.1.2:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.1.2: Edgeport TI 2 port adapter converter now attached to ttyUSB2
usb 2-1.1.2: Edgeport TI 2 port adapter converter now attached to ttyUSB3
drivers/usb/core/inode.c: creating file '066'
usb 2-1.1.2: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.2: Product: Edgeport/416
usb 2-1.1.2: Manufacturer: Digi International
usb 2-1.1.2: SerialNumber: V70008669-1
hub 2-1.1:1.0: port 3, status 0101, change 0000, 12 Mb/s
usb 2-1.1.3: new full speed USB device using uhci_hcd and address 67
usb 2-1.1.3: ep0 maxpacket = 8
usb 2-1.1.3: default language 0x0409
usb 2-1.1.3: uevent
usb 2-1.1.3: usb_probe_device
usb 2-1.1.3: configuration #1 chosen from 1 choice
usb 2-1.1.3: adding 2-1.1.3:1.0 (config #1, interface 0)
usb 2-1.1.3:1.0: uevent
usbserial_generic 2-1.1.3:1.0: usb_probe_interface
usbserial_generic 2-1.1.3:1.0: usb_probe_interface - got id
io_ti 2-1.1.3:1.0: usb_probe_interface
io_ti 2-1.1.3:1.0: usb_probe_interface - got id
io_ti 2-1.1.3:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.1.3: Edgeport TI 2 port adapter converter now attached to ttyUSB4
usb 2-1.1.3: Edgeport TI 2 port adapter converter now attached to ttyUSB5
drivers/usb/core/inode.c: creating file '067'
usb 2-1.1.3: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.3: Product: Edgeport/416
usb 2-1.1.3: Manufacturer: Digi International
usb 2-1.1.3: SerialNumber: V70008669-2
hub 2-1.1:1.0: port 4, status 0101, change 0000, 12 Mb/s
usb 2-1.1.4: new full speed USB device using uhci_hcd and address 68
usb 2-1.1.4: ep0 maxpacket = 8
usb 2-1.1.4: default language 0x0409
usb 2-1.1.4: uevent
usb 2-1.1.4: usb_probe_device
usb 2-1.1.4: configuration #1 chosen from 1 choice
usb 2-1.1.4: adding 2-1.1.4:1.0 (config #1, interface 0)
usb 2-1.1.4:1.0: uevent
usbserial_generic 2-1.1.4:1.0: usb_probe_interface
usbserial_generic 2-1.1.4:1.0: usb_probe_interface - got id
io_ti 2-1.1.4:1.0: usb_probe_interface
io_ti 2-1.1.4:1.0: usb_probe_interface - got id
io_ti 2-1.1.4:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.1.4: Edgeport TI 2 port adapter converter now attached to ttyUSB6
usb 2-1.1.4: Edgeport TI 2 port adapter converter now attached to ttyUSB7
drivers/usb/core/inode.c: creating file '068'
usb 2-1.1.4: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.4: Product: Edgeport/416
usb 2-1.1.4: Manufacturer: Digi International
usb 2-1.1.4: SerialNumber: V70008669-3
hub 2-1.1:1.0: state 7 ports 4 chg 0000 evt 0010
hub 2-1.2:1.0: state 7 ports 4 chg 001e evt 0000
hub 2-1.2:1.0: port 1, status 0101, change 0000, 12 Mb/s
usb 2-1.2.1: new full speed USB device using uhci_hcd and address 69
usb 2-1.2.1: ep0 maxpacket = 8
usb 2-1.2.1: default language 0x0409
usb 2-1.2.1: uevent
usb 2-1.2.1: usb_probe_device
usb 2-1.2.1: configuration #1 chosen from 1 choice
usb 2-1.2.1: adding 2-1.2.1:1.0 (config #1, interface 0)
usb 2-1.2.1:1.0: uevent
usbserial_generic 2-1.2.1:1.0: usb_probe_interface
usbserial_generic 2-1.2.1:1.0: usb_probe_interface - got id
io_ti 2-1.2.1:1.0: usb_probe_interface
io_ti 2-1.2.1:1.0: usb_probe_interface - got id
io_ti 2-1.2.1:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.2.1: Edgeport TI 2 port adapter converter now attached to ttyUSB8
usb 2-1.2.1: Edgeport TI 2 port adapter converter now attached to ttyUSB9
drivers/usb/core/inode.c: creating file '069'
usb 2-1.2.1: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.1: Product: Edgeport/416
usb 2-1.2.1: Manufacturer: Digi International
usb 2-1.2.1: SerialNumber: V70008669-4
hub 2-1.2:1.0: port 2, status 0101, change 0000, 12 Mb/s
usb 2-1.2.2: new full speed USB device using uhci_hcd and address 70
usb 2-1.2.2: ep0 maxpacket = 8
usb 2-1.2.2: default language 0x0409
usb 2-1.2.2: uevent
usb 2-1.2.2: usb_probe_device
usb 2-1.2.2: configuration #1 chosen from 1 choice
usb 2-1.2.2: adding 2-1.2.2:1.0 (config #1, interface 0)
usb 2-1.2.2:1.0: uevent
usbserial_generic 2-1.2.2:1.0: usb_probe_interface
usbserial_generic 2-1.2.2:1.0: usb_probe_interface - got id
io_ti 2-1.2.2:1.0: usb_probe_interface
io_ti 2-1.2.2:1.0: usb_probe_interface - got id
io_ti 2-1.2.2:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.2.2: Edgeport TI 2 port adapter converter now attached to ttyUSB10
usb 2-1.2.2: Edgeport TI 2 port adapter converter now attached to ttyUSB11
drivers/usb/core/inode.c: creating file '070'
usb 2-1.2.2: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.2: Product: Edgeport/416
usb 2-1.2.2: Manufacturer: Digi International
usb 2-1.2.2: SerialNumber: V70008669-5
hub 2-1.2:1.0: port 3, status 0101, change 0000, 12 Mb/s
usb 2-1.2.3: new full speed USB device using uhci_hcd and address 71
usb 2-1.2.3: ep0 maxpacket = 8
usb 2-1.2.3: default language 0x0409
usb 2-1.2.3: uevent
usb 2-1.2.3: usb_probe_device
usb 2-1.2.3: configuration #1 chosen from 1 choice
usb 2-1.2.3: adding 2-1.2.3:1.0 (config #1, interface 0)
usb 2-1.2.3:1.0: uevent
usbserial_generic 2-1.2.3:1.0: usb_probe_interface
usbserial_generic 2-1.2.3:1.0: usb_probe_interface - got id
io_ti 2-1.2.3:1.0: usb_probe_interface
io_ti 2-1.2.3:1.0: usb_probe_interface - got id
io_ti 2-1.2.3:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.2.3: Edgeport TI 2 port adapter converter now attached to ttyUSB12
usb 2-1.2.3: Edgeport TI 2 port adapter converter now attached to ttyUSB13
drivers/usb/core/inode.c: creating file '071'
usb 2-1.2.3: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.3: Product: Edgeport/416
usb 2-1.2.3: Manufacturer: Digi International
usb 2-1.2.3: SerialNumber: V70008669-6
hub 2-1.2:1.0: port 4, status 0101, change 0000, 12 Mb/s
usb 2-1.2.4: new full speed USB device using uhci_hcd and address 72
usb 2-1.2.4: ep0 maxpacket = 8
usb 2-1.2.4: default language 0x0409
usb 2-1.2.4: uevent
usb 2-1.2.4: usb_probe_device
usb 2-1.2.4: configuration #1 chosen from 1 choice
usb 2-1.2.4: adding 2-1.2.4:1.0 (config #1, interface 0)
usb 2-1.2.4:1.0: uevent
usbserial_generic 2-1.2.4:1.0: usb_probe_interface
usbserial_generic 2-1.2.4:1.0: usb_probe_interface - got id
io_ti 2-1.2.4:1.0: usb_probe_interface
io_ti 2-1.2.4:1.0: usb_probe_interface - got id
io_ti 2-1.2.4:1.0: Edgeport TI 2 port adapter converter detected
usb 2-1.2.4: Edgeport TI 2 port adapter converter now attached to ttyUSB14
usb 2-1.2.4: Edgeport TI 2 port adapter converter now attached to ttyUSB15
drivers/usb/core/inode.c: creating file '072'
usb 2-1.2.4: New USB device found, idVendor=1608, idProduct=0247
usb 2-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.4: Product: Edgeport/416
usb 2-1.2.4: Manufacturer: Digi International
usb 2-1.2.4: SerialNumber: V70008669-7
hub 2-1.2:1.0: state 7 ports 4 chg 0000 evt 0008
usb 2-1.1.1:1.0: uevent
usb 2-1.1.1: uevent
usb 2-1.1: uevent
usb 2-1: uevent
usb usb2: uevent
usb 2-1.1.1:1.0: uevent
usb 2-1.1.1: uevent
usb 2-1.1: uevent
usb 2-1: uevent
usb usb2: uevent