* trouble in installing udev on arm
@ 2009-07-29 6:42 Saurabh Kadekodi
2009-07-29 10:18 ` Alan Jenkins
0 siblings, 1 reply; 2+ messages in thread
From: Saurabh Kadekodi @ 2009-07-29 6:42 UTC (permalink / raw)
To: linux-hotplug
Hi all,
I'm working on an arm board with pxa270 processor. I have cross compiled
and installed udev on this board.
I'll attach the log of the udevadm monitor when i attacha usb stick.
---------------------------------------------------------------------------------------------
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[1248848449.110058] add
/devices/platform/pxa27x-ohci/usb1/1-2 (usb)
KERNEL[1248848449.112719] add
/devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0 (usb)
UDEV [1248848449.129071] add /block/sda/sda1 (block)
UDEV [1248848449.132152] remove
/devices/platform/pxa27x-ohci/usb1/1-1 (usb)
KERNEL[1248848449.135746] add /class/scsi_host/host1 (scsi_host)
KERNEL[1248848449.147590] add /class/usb_endpoint/usbdev1.3_ep81
(usb_endpoint)
KERNEL[1248848449.178181] add /class/usb_endpoint/usbdev1.3_ep02
(usb_endpoint)
KERNEL[1248848449.187025] add /class/usb_device/usbdev1.3
(usb_device)
KERNEL[1248848449.197382] add /class/usb_endpoint/usbdev1.3_ep00
(usb_endpoint)
UDEV [1248848449.213970] remove /block/sda/sda1 (block)
UDEV [1248848449.233043] add
/devices/platform/pxa27x-ohci/usb1/1-2 (usb)
UDEV [1248848449.281160] remove /block/sda (block)
UDEV [1248848449.283638] add
/devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0 (usb)
UDEV [1248848449.291824] add /class/scsi_host/host1 (scsi_host)
UDEV [1248848449.319210] add /class/usb_endpoint/usbdev1.3_ep81
(usb_endpoint)
UDEV [1248848449.343678] add /class/usb_endpoint/usbdev1.3_ep02
(usb_endpoint)
UDEV [1248848449.381726] add /class/usb_device/usbdev1.3
(usb_device)
UDEV [1248848449.385461] add /class/usb_endpoint/usbdev1.3_ep00
(usb_endpoint)
scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0
ANSI: 0 CCS
KERNEL[1248848454.186353] add
/devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
(scsi)
KERNEL[1248848454.217206] add /class/scsi_device/1:0:0:0
(scsi_device)
KERNEL[1248848454.234444] add /class/scsi_disk/1:0:0:0 (scsi_disk)
UDEV [1248848454.294535] add
/devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
(scsi)
sd 1:0:0:0: [sda] 2015232 512-byte hardware sectors: (1.03 GB/984 MiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Assuming drive cache: write through
KERNEL[1248848454.485913] change
/devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
(scsi)
UDEV [1248848454.508901] add /class/scsi_device/1:0:0:0 (ssd
1:0:0:0: [sda] Assuming drive cache: write through
csi_device)
sda1
KERNEL[1248848454.529590] add /block/sda/sda1 (block)
UDEV [1248848454.577772] add /class/scsi_disk/1:0:0:0 (scsi_disk)
KERNEL[1248848454.579938] add /block/sda (block)
KERNEL[1248848454.586855] add /block/sda/sda1 (block)
UDEV [1248848454.597800] change
/devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
(scsi)
KERNEL[1248848454.606973] add /class/bdi/8:0 (bdi)
sd 1:0:0:0: [sda] Attached SCSI removable disk
UDEV [1248848454.671631] add /class/bdi/8:0 (bdi)
UDEV [1248848454.714831] add /block/sda/sda1 (block)
-----------------------------------------------------------------------------------------------------------------------
This proves that udev is working.
My board has 5 serial ports. I have deleted all entries of ttyS* from
the /dev directory.
Also i have the 50-default rules file in /etc/udev and /lib/udev.
But still when i reboot, no /dev/ttyS devices are creates. Why is that?
Any help will be appreciated.
Thanks in advance,
Saurabh
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: trouble in installing udev on arm
2009-07-29 6:42 trouble in installing udev on arm Saurabh Kadekodi
@ 2009-07-29 10:18 ` Alan Jenkins
0 siblings, 0 replies; 2+ messages in thread
From: Alan Jenkins @ 2009-07-29 10:18 UTC (permalink / raw)
To: linux-hotplug
On 7/29/09, Saurabh Kadekodi <saurabh@springcomputing.in> wrote:
> Hi all,
>
> I'm working on an arm board with pxa270 processor. I have cross compiled
> and installed udev on this board.
>
> I'll attach the log of the udevadm monitor when i attacha usb stick.
>
> ---------------------------------------------------------------------------------------------
> monitor will print the received events for:
> UDEV - the event which udev sends out after rule processing
> KERNEL - the kernel uevent
>
> KERNEL[1248848449.110058] add
> /devices/platform/pxa27x-ohci/usb1/1-2 (usb)
> KERNEL[1248848449.112719] add
> /devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0 (usb)
> UDEV [1248848449.129071] add /block/sda/sda1 (block)
> UDEV [1248848449.132152] remove
> /devices/platform/pxa27x-ohci/usb1/1-1 (usb)
> KERNEL[1248848449.135746] add /class/scsi_host/host1 (scsi_host)
> KERNEL[1248848449.147590] add /class/usb_endpoint/usbdev1.3_ep81
> (usb_endpoint)
> KERNEL[1248848449.178181] add /class/usb_endpoint/usbdev1.3_ep02
> (usb_endpoint)
> KERNEL[1248848449.187025] add /class/usb_device/usbdev1.3
> (usb_device)
> KERNEL[1248848449.197382] add /class/usb_endpoint/usbdev1.3_ep00
> (usb_endpoint)
> UDEV [1248848449.213970] remove /block/sda/sda1 (block)
> UDEV [1248848449.233043] add
> /devices/platform/pxa27x-ohci/usb1/1-2 (usb)
> UDEV [1248848449.281160] remove /block/sda (block)
> UDEV [1248848449.283638] add
> /devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0 (usb)
> UDEV [1248848449.291824] add /class/scsi_host/host1 (scsi_host)
> UDEV [1248848449.319210] add /class/usb_endpoint/usbdev1.3_ep81
> (usb_endpoint)
> UDEV [1248848449.343678] add /class/usb_endpoint/usbdev1.3_ep02
> (usb_endpoint)
> UDEV [1248848449.381726] add /class/usb_device/usbdev1.3
> (usb_device)
> UDEV [1248848449.385461] add /class/usb_endpoint/usbdev1.3_ep00
> (usb_endpoint)
> scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0
> ANSI: 0 CCS
> KERNEL[1248848454.186353] add
> /devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
> (scsi)
> KERNEL[1248848454.217206] add /class/scsi_device/1:0:0:0
> (scsi_device)
> KERNEL[1248848454.234444] add /class/scsi_disk/1:0:0:0 (scsi_disk)
> UDEV [1248848454.294535] add
> /devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
> (scsi)
> sd 1:0:0:0: [sda] 2015232 512-byte hardware sectors: (1.03 GB/984 MiB)
> sd 1:0:0:0: [sda] Write Protect is off
> sd 1:0:0:0: [sda] Assuming drive cache: write through
> KERNEL[1248848454.485913] change
> /devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
> (scsi)
> UDEV [1248848454.508901] add /class/scsi_device/1:0:0:0 (ssd
> 1:0:0:0: [sda] Assuming drive cache: write through
> csi_device)
> sda1
> KERNEL[1248848454.529590] add /block/sda/sda1 (block)
> UDEV [1248848454.577772] add /class/scsi_disk/1:0:0:0 (scsi_disk)
> KERNEL[1248848454.579938] add /block/sda (block)
> KERNEL[1248848454.586855] add /block/sda/sda1 (block)
> UDEV [1248848454.597800] change
> /devices/platform/pxa27x-ohci/usb1/1-2/1-2:1.0/host1/target1:0:0/1:0:0:0
> (scsi)
> KERNEL[1248848454.606973] add /class/bdi/8:0 (bdi)
> sd 1:0:0:0: [sda] Attached SCSI removable disk
> UDEV [1248848454.671631] add /class/bdi/8:0 (bdi)
> UDEV [1248848454.714831] add /block/sda/sda1 (block)
> -----------------------------------------------------------------------------------------------------------------------
>
> This proves that udev is working.
>
> My board has 5 serial ports. I have deleted all entries of ttyS* from
> the /dev directory.
> Also i have the 50-default rules file in /etc/udev and /lib/udev.
>
> But still when i reboot, no /dev/ttyS devices are creates. Why is that?
>
> Any help will be appreciated.
>
> Thanks in advance,
>
> Saurabh
You don't say what you're using for a udev initscript. Maybe you
forgot to run "udevadm trigger" after starting udevd? It's
asynchronous, so usually you also want a "udevadm settle" afterwards.
Alan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-07-29 10:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-29 6:42 trouble in installing udev on arm Saurabh Kadekodi
2009-07-29 10:18 ` Alan Jenkins
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).