* Re: Syncing Clié PEG-SL10/U
@ 2004-01-08 5:08 Matej Cepl
0 siblings, 0 replies; only message in thread
From: Matej Cepl @ 2004-01-08 5:08 UTC (permalink / raw)
To: linux-hotplug
[-- Attachment #1.1: body text --]
[-- Type: text/plain, Size: 1806 bytes --]
Sorry for cross-posting, but I am getting rather desperate
(fighting with this for more than a month), so I hope that there
may be some issue with hotplug and accordingly some advice here.
Thanks for any help,
Matej
P.S.: Hope that in this situation top-on-posting is not too bad.
--
Matej Cepl, http://www.ceplovi.cz/matej
GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave. #10, Somerville, Ma 02143, (617) 623-1488
Just remember, brothers and sisters--their skins may be white,
but their souls are just as black as ours!
-- a black preacher
On Tuesday 30 of December 2003 04:50, Alexandre Aractingi wrote:
> Did you check /var/log/messages when you press the hotsync
> button on your Clié to check which port was assigned to your
> PDA? Mine uses /dev/usb/tts/0 (Mandrake uses devfs by default).
> Try "pilot-xfer -p /path/to/usb -l" after hitting the Hotsync
> button and see what happens then...
Without any command on Linux (just pressing HotSync button in
HotSync application on Sony Clié with Debian/woody and my own
vanilla kernel 2.4.23 -- the only patch on kernel is swsusp,
which should be IMHO unrelated to USB), I get the attached piece
of /var/log/messages.
When trying you command
pilot-xfer -p /dev/ttyUSB1 -l
gives exactly nothing (``Please press the HotSync button now
...'', using pilot-xfer 0.11.8, until the connection times out).
The only interesting thing I see in syslog is a note about
missing kernel or user mode driver visor (which is not true,
there is visor.o kernel module duly installed in
/lib/modules/2.4.23/kernel/drivers/usb/serial/visor.o). Any ideas
how to fix it? Should I do something brutal to HotPlug
configuration? What?
Thanks for any thoughts,
Matej
[-- Attachment #1.2: messages.clie --]
[-- Type: text/plain, Size: 6203 bytes --]
Jan 7 15:25:53 komensky kernel: hub.c: new USB device 00:07.2-1, assigned address 2
Jan 7 15:25:53 komensky kernel: Manufacturer: Palm, Inc.
Jan 7 15:25:53 komensky kernel: Product: Palm Handheld
Jan 7 15:25:53 komensky kernel: usb.c: USB device 2 (vend/prod 0x54c/0x66) is not claimed by any active driver.
Jan 7 15:25:53 komensky kernel: Length = 18
Jan 7 15:25:53 komensky kernel: DescriptorType = 01
Jan 7 15:25:53 komensky kernel: USB version = 1.00
Jan 7 15:25:53 komensky kernel: Vendor:Product = 054c:0066
Jan 7 15:25:53 komensky kernel: MaxPacketSize0 = 16
Jan 7 15:25:53 komensky kernel: NumConfigurations = 1
Jan 7 15:25:53 komensky kernel: Device version = 1.00
Jan 7 15:25:53 komensky kernel: Device Class:SubClass:Protocol = 00:00:00
Jan 7 15:25:53 komensky kernel: Per-interface classes
Jan 7 15:25:53 komensky kernel: Configuration:
Jan 7 15:25:53 komensky kernel: bLength = 9
Jan 7 15:25:53 komensky kernel: bDescriptorType = 02
Jan 7 15:25:53 komensky kernel: wTotalLength = 002e
Jan 7 15:25:53 komensky kernel: bNumInterfaces = 01
Jan 7 15:25:53 komensky kernel: bConfigurationValue = 01
Jan 7 15:25:53 komensky kernel: iConfiguration = 00
Jan 7 15:25:53 komensky kernel: bmAttributes = c0
Jan 7 15:25:53 komensky kernel: MaxPower = 2mA
Jan 7 15:25:53 komensky kernel:
Jan 7 15:25:53 komensky kernel: Interface: 0
Jan 7 15:25:53 komensky kernel: Alternate Setting: 0
Jan 7 15:25:53 komensky kernel: bLength = 9
Jan 7 15:25:53 komensky kernel: bDescriptorType = 04
Jan 7 15:25:53 komensky kernel: bInterfaceNumber = 00
Jan 7 15:25:53 komensky kernel: bAlternateSetting = 00
Jan 7 15:25:53 komensky kernel: bNumEndpoints = 04
Jan 7 15:25:53 komensky kernel: bInterface Class:SubClass:Protocol = ff:00:00
Jan 7 15:25:53 komensky kernel: iInterface = 00
Jan 7 15:25:53 komensky kernel: Endpoint:
Jan 7 15:25:53 komensky kernel: bLength = 7
Jan 7 15:25:53 komensky kernel: bDescriptorType = 05
Jan 7 15:25:53 komensky kernel: bEndpointAddress = 81 (in)
Jan 7 15:25:53 komensky kernel: bmAttributes = 02 (Bulk)
Jan 7 15:25:53 komensky kernel: wMaxPacketSize = 0010
Jan 7 15:25:53 komensky kernel: bInterval = 00
Jan 7 15:25:53 komensky kernel: Endpoint:
Jan 7 15:25:53 komensky kernel: bLength = 7
Jan 7 15:25:53 komensky kernel: bDescriptorType = 05
Jan 7 15:25:53 komensky kernel: bEndpointAddress = 01 (out)
Jan 7 15:25:53 komensky kernel: bmAttributes = 02 (Bulk)
Jan 7 15:25:53 komensky kernel: wMaxPacketSize = 0010
Jan 7 15:25:53 komensky kernel: bInterval = 00
Jan 7 15:25:53 komensky kernel: Endpoint:
Jan 7 15:25:53 komensky kernel: bLength = 7
Jan 7 15:25:53 komensky kernel: bDescriptorType = 05
Jan 7 15:25:53 komensky kernel: bEndpointAddress = 82 (in)
Jan 7 15:25:53 komensky kernel: bmAttributes = 02 (Bulk)
Jan 7 15:25:53 komensky kernel: wMaxPacketSize = 0040
Jan 7 15:25:53 komensky kernel: bInterval = 00
Jan 7 15:25:53 komensky kernel: Endpoint:
Jan 7 15:25:53 komensky kernel: bLength = 7
Jan 7 15:25:53 komensky kernel: bDescriptorType = 05
Jan 7 15:25:53 komensky kernel: bEndpointAddress = 02 (out)
Jan 7 15:25:53 komensky kernel: bmAttributes = 02 (Bulk)
Jan 7 15:25:53 komensky kernel: wMaxPacketSize = 0040
Jan 7 15:25:53 komensky kernel: bInterval = 00
Jan 7 15:25:53 komensky /sbin/hotplug: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug SHLVL=1 HOME=/ DEVICE=/proc/bus/usb/001/002 INTERFACE=255/0/0 PRODUCT=54c/66/100 TYPE=0/0/0 DEBUG=kernel _=/usr/bin/env)
Jan 7 15:25:53 komensky /sbin/hotplug: invoke /etc/hotplug/usb.agent ()
Jan 7 15:25:54 komensky /etc/hotplug/usb.agent: Setup visor for USB product 54c/66/100
Jan 7 15:25:54 komensky kernel: usb.c: registered new driver serial
Jan 7 15:25:54 komensky kernel: usbserial.c: USB Serial support registered for Generic
Jan 7 15:25:54 komensky kernel: usbserial.c: USB Serial Driver core v1.4
Jan 7 15:25:55 komensky kernel: usbserial.c: USB Serial support registered for Handspring Visor / Treo / Palm 4.0 / Clié 4.x
Jan 7 15:25:55 komensky kernel: usbserial.c: Handspring Visor / Treo / Palm 4.0 / Clié 4.x converter detected
Jan 7 15:25:55 komensky kernel: usb-uhci.c: interrupt, status 2, frame# 2012
Jan 7 15:25:55 komensky kernel: usbserial.c: Handspring Visor / Treo / Palm 4.0 / Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Jan 7 15:25:55 komensky kernel: usbserial.c: Handspring Visor / Treo / Palm 4.0 / Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
Jan 7 15:25:55 komensky kernel: usbserial.c: USB Serial support registered for Sony Clié 3.5
Jan 7 15:25:55 komensky kernel: visor.c: USB HandSpring Visor, Palm m50x, Treo, Sony Clié driver v1.7
Jan 7 15:25:56 komensky /etc/hotplug/usb.agent: missing kernel or user mode driver visor
Jan 7 15:26:53 komensky kernel: usb.c: USB disconnect on device 00:07.2-1 address 2
Jan 7 15:26:53 komensky kernel: usbserial.c: Handspring Visor / Treo / Palm 4.0 / Clié 4.x converter now disconnected from ttyUSB0
Jan 7 15:26:53 komensky kernel: usbserial.c: Handspring Visor / Treo / Palm 4.0 / Clié 4.x converter now disconnected from ttyUSB1
Jan 7 15:26:53 komensky /sbin/hotplug: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=remove PWD=/etc/hotplug SHLVL=1 HOME=/ DEVICE=/proc/bus/usb/001/002 INTERFACE=255/0/0 PRODUCT=54c/66/100 TYPE=0/0/0 DEBUG=kernel _=/usr/bin/env)
Jan 7 15:26:53 komensky /sbin/hotplug: invoke /etc/hotplug/usb.agent ()
[-- Attachment #1.3: devices --]
[-- Type: text/plain, Size: 918 bytes --]
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=054c ProdID=0066 Rev= 1.00
S: Manufacturer=Palm, Inc.
S: Product=Palm Handheld
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[-- Attachment #2: signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-01-08 5:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-08 5:08 Syncing Clié PEG-SL10/U Matej Cepl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).