* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
@ 2004-01-22 18:28 ` Måns Rullgård
2004-01-22 20:17 ` Greg KH
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Måns Rullgård @ 2004-01-22 18:28 UTC (permalink / raw)
To: linux-hotplug
Greg KH <greg@kroah.com> writes:
> udev development is done in a BitKeeper repository located at:
> bk://linuxusb.bkbits.net/udev
Why do I have to do bk pull twice to get updates from that repository?
Like this:
$ bk pull
Pull bk://linuxusb.bkbits.net/udev
-> file://home/src/udev
$ bk pull
Pull bk://linuxusb.bkbits.net/udev
-> file://home/src/udev
---------------------- Receiving the following csets -----------------------
1.449 1.448 1.447 1.446 1.445 1.444 1.443 1.442 1.441 1.440
----------------------------------------------------------------------------
This may be off-topic here, but I've only seen it with the udev
repository.
--
Måns Rullgård
mru@kth.se
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
2004-01-22 18:28 ` Måns Rullgård
@ 2004-01-22 20:17 ` Greg KH
2004-01-22 20:24 ` Måns Rullgård
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Greg KH @ 2004-01-22 20:17 UTC (permalink / raw)
To: linux-hotplug
On Thu, Jan 22, 2004 at 07:28:13PM +0100, Måns Rullgård wrote:
> Greg KH <greg@kroah.com> writes:
>
> > udev development is done in a BitKeeper repository located at:
> > bk://linuxusb.bkbits.net/udev
>
> Why do I have to do bk pull twice to get updates from that repository?
> Like this:
>
> $ bk pull
> Pull bk://linuxusb.bkbits.net/udev
> -> file://home/src/udev
> $ bk pull
> Pull bk://linuxusb.bkbits.net/udev
> -> file://home/src/udev
> ---------------------- Receiving the following csets -----------------------
> 1.449 1.448 1.447 1.446 1.445 1.444 1.443 1.442 1.441 1.440
> ----------------------------------------------------------------------------
>
> This may be off-topic here, but I've only seen it with the udev
> repository.
I have no idea. If you try:
bk://kernel.bkbits.net/gregkh/udev/
does it work better? (that's a mirror of the linuxusb udev tree)
thanks,
greg k-h
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
2004-01-22 18:28 ` Måns Rullgård
2004-01-22 20:17 ` Greg KH
@ 2004-01-22 20:24 ` Måns Rullgård
2004-01-22 20:32 ` Kay Sievers
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Måns Rullgård @ 2004-01-22 20:24 UTC (permalink / raw)
To: linux-hotplug
Greg KH <greg@kroah.com> writes:
> On Thu, Jan 22, 2004 at 07:28:13PM +0100, Måns Rullgård wrote:
>> Greg KH <greg@kroah.com> writes:
>>
>> > udev development is done in a BitKeeper repository located at:
>> > bk://linuxusb.bkbits.net/udev
>>
>> Why do I have to do bk pull twice to get updates from that repository?
>> Like this:
>>
>> $ bk pull
>> Pull bk://linuxusb.bkbits.net/udev
>> -> file://home/src/udev
>> $ bk pull
>> Pull bk://linuxusb.bkbits.net/udev
>> -> file://home/src/udev
>> ---------------------- Receiving the following csets -----------------------
>> 1.449 1.448 1.447 1.446 1.445 1.444 1.443 1.442 1.441 1.440
>> ----------------------------------------------------------------------------
>>
>> This may be off-topic here, but I've only seen it with the udev
>> repository.
>
> I have no idea. If you try:
> bk://kernel.bkbits.net/gregkh/udev/
> does it work better? (that's a mirror of the linuxusb udev tree)
I don't know. I'll try that next time (there are no more changes to
get right now). I could of course unpull and try again, but I don't a
working pull then would mean anything.
--
Måns Rullgård
mru@kth.se
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
` (2 preceding siblings ...)
2004-01-22 20:24 ` Måns Rullgård
@ 2004-01-22 20:32 ` Kay Sievers
2004-01-22 20:35 ` Hanna Linder
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Kay Sievers @ 2004-01-22 20:32 UTC (permalink / raw)
To: linux-hotplug
On Thu, Jan 22, 2004 at 07:28:13PM +0100, Måns Rullgård wrote:
> Greg KH <greg@kroah.com> writes:
>
> > udev development is done in a BitKeeper repository located at:
> > bk://linuxusb.bkbits.net/udev
>
> Why do I have to do bk pull twice to get updates from that repository?
> Like this:
>
> $ bk pull
> Pull bk://linuxusb.bkbits.net/udev
> -> file://home/src/udev
> $ bk pull
> Pull bk://linuxusb.bkbits.net/udev
> -> file://home/src/udev
> ---------------------- Receiving the following csets -----------------------
> 1.449 1.448 1.447 1.446 1.445 1.444 1.443 1.442 1.441 1.440
> ----------------------------------------------------------------------------
I have exactly the same behavior. Three out of ten times,
I have to pull twice to get it.
Kay
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
` (3 preceding siblings ...)
2004-01-22 20:32 ` Kay Sievers
@ 2004-01-22 20:35 ` Hanna Linder
2004-01-22 21:06 ` Greg KH
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Hanna Linder @ 2004-01-22 20:35 UTC (permalink / raw)
To: linux-hotplug
>
> I have exactly the same behavior. Three out of ten times,
> I have to pull twice to get it.
>
> Kay
Me too. Probably about 2 or 3 times out of ten it will do it.
Hanna
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
` (4 preceding siblings ...)
2004-01-22 20:35 ` Hanna Linder
@ 2004-01-22 21:06 ` Greg KH
2004-01-22 21:08 ` Måns Rullgård
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Greg KH @ 2004-01-22 21:06 UTC (permalink / raw)
To: linux-hotplug
On Thu, Jan 22, 2004 at 09:32:49PM +0100, Kay Sievers wrote:
> On Thu, Jan 22, 2004 at 07:28:13PM +0100, Måns Rullgård wrote:
> > Greg KH <greg@kroah.com> writes:
> >
> > > udev development is done in a BitKeeper repository located at:
> > > bk://linuxusb.bkbits.net/udev
> >
> > Why do I have to do bk pull twice to get updates from that repository?
> > Like this:
> >
> > $ bk pull
> > Pull bk://linuxusb.bkbits.net/udev
> > -> file://home/src/udev
> > $ bk pull
> > Pull bk://linuxusb.bkbits.net/udev
> > -> file://home/src/udev
> > ---------------------- Receiving the following csets -----------------------
> > 1.449 1.448 1.447 1.446 1.445 1.444 1.443 1.442 1.441 1.440
> > ----------------------------------------------------------------------------
>
> I have exactly the same behavior. Three out of ten times,
> I have to pull twice to get it.
Very wierd. Make sure you are using the latest version of bk (3.0.4 as
of today). I've pushed a single changeset out to the repository for
everyone to see if they can pull successfully.
Also try bk://kernel.bkbits.net/gregkh/udev and see if that works better
for people.
thanks,
greg k-h
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
` (5 preceding siblings ...)
2004-01-22 21:06 ` Greg KH
@ 2004-01-22 21:08 ` Måns Rullgård
2004-01-22 21:18 ` Kay Sievers
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Måns Rullgård @ 2004-01-22 21:08 UTC (permalink / raw)
To: linux-hotplug
Greg KH <greg@kroah.com> writes:
>> > Why do I have to do bk pull twice to get updates from that repository?
>>
>> I have exactly the same behavior. Three out of ten times,
>> I have to pull twice to get it.
>
> Very wierd. Make sure you are using the latest version of bk (3.0.4 as
> of today). I've pushed a single changeset out to the repository for
> everyone to see if they can pull successfully.
This time it worked. And I am using bk 3.0.4.
--
Måns Rullgård
mru@kth.se
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
` (6 preceding siblings ...)
2004-01-22 21:08 ` Måns Rullgård
@ 2004-01-22 21:18 ` Kay Sievers
2004-01-22 21:20 ` Måns Rullgård
2004-02-20 2:01 ` Kay Sievers
9 siblings, 0 replies; 11+ messages in thread
From: Kay Sievers @ 2004-01-22 21:18 UTC (permalink / raw)
To: linux-hotplug
On Thu, Jan 22, 2004 at 01:06:21PM -0800, Greg KH wrote:
> On Thu, Jan 22, 2004 at 09:32:49PM +0100, Kay Sievers wrote:
> > On Thu, Jan 22, 2004 at 07:28:13PM +0100, Måns Rullgård wrote:
> > > Greg KH <greg@kroah.com> writes:
> > >
> > > > udev development is done in a BitKeeper repository located at:
> > > > bk://linuxusb.bkbits.net/udev
> > >
> > > Why do I have to do bk pull twice to get updates from that repository?
> > > Like this:
> > >
> > > $ bk pull
> > > Pull bk://linuxusb.bkbits.net/udev
> > > -> file://home/src/udev
> > > $ bk pull
> > > Pull bk://linuxusb.bkbits.net/udev
> > > -> file://home/src/udev
> > > ---------------------- Receiving the following csets -----------------------
> > > 1.449 1.448 1.447 1.446 1.445 1.444 1.443 1.442 1.441 1.440
> > > ----------------------------------------------------------------------------
> >
> > I have exactly the same behavior. Three out of ten times,
> > I have to pull twice to get it.
>
> Very wierd. Make sure you are using the latest version of bk (3.0.4 as
> of today). I've pushed a single changeset out to the repository for
> everyone to see if they can pull successfully.
>
> Also try bk://kernel.bkbits.net/gregkh/udev and see if that works better
> for people.
It worked now. I've upgraded from 3.0.3 and used the linuxusb tree,
I will mention it, if it happens again.
Kay
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
` (7 preceding siblings ...)
2004-01-22 21:18 ` Kay Sievers
@ 2004-01-22 21:20 ` Måns Rullgård
2004-02-20 2:01 ` Kay Sievers
9 siblings, 0 replies; 11+ messages in thread
From: Måns Rullgård @ 2004-01-22 21:20 UTC (permalink / raw)
To: linux-hotplug
Kay Sievers <kay.sievers@vrfy.org> writes:
>> Very wierd. Make sure you are using the latest version of bk (3.0.4 as
>> of today). I've pushed a single changeset out to the repository for
>> everyone to see if they can pull successfully.
>>
>> Also try bk://kernel.bkbits.net/gregkh/udev and see if that works better
>> for people.
>
> It worked now. I've upgraded from 3.0.3 and used the linuxusb tree,
> I will mention it, if it happens again.
Just for the record, I've been using 3.0.4 all along.
--
Måns Rullgård
mru@kth.se
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [ANNOUNCE] udev 014 release
2004-01-22 18:15 [ANNOUNCE] udev 014 release Greg KH
` (8 preceding siblings ...)
2004-01-22 21:20 ` Måns Rullgård
@ 2004-02-20 2:01 ` Kay Sievers
9 siblings, 0 replies; 11+ messages in thread
From: Kay Sievers @ 2004-02-20 2:01 UTC (permalink / raw)
To: linux-hotplug
On Thu, Jan 22, 2004 at 01:06:21PM -0800, Greg KH wrote:
> On Thu, Jan 22, 2004 at 09:32:49PM +0100, Kay Sievers wrote:
> > On Thu, Jan 22, 2004 at 07:28:13PM +0100, Måns Rullgård wrote:
> > > Greg KH <greg@kroah.com> writes:
> > >
> > > > udev development is done in a BitKeeper repository located at:
> > > > bk://linuxusb.bkbits.net/udev
> > >
> > > Why do I have to do bk pull twice to get updates from that repository?
> > > Like this:
> > >
> > > $ bk pull
> > > Pull bk://linuxusb.bkbits.net/udev
> > > -> file://home/src/udev
> > > $ bk pull
> > > Pull bk://linuxusb.bkbits.net/udev
> > > -> file://home/src/udev
> > > ---------------------- Receiving the following csets -----------------------
> > > 1.449 1.448 1.447 1.446 1.445 1.444 1.443 1.442 1.441 1.440
> > > ----------------------------------------------------------------------------
> >
> > I have exactly the same behavior. Three out of ten times,
> > I have to pull twice to get it.
>
> Very wierd. Make sure you are using the latest version of bk (3.0.4 as
> of today). I've pushed a single changeset out to the repository for
> everyone to see if they can pull successfully.
Today I got the same wierd thing again.
Anybody with still the same problem?
thanks,
Kay
kay@pim:~/src$ cd udev
kay@pim:~/src/udev$ bk pull
Pull bk://linuxusb.bkbits.net/udev/
-> file://home/kay/src/udev
kay@pim:~/src/udev$
kay@pim:~/src/udev$
kay@pim:~/src/udev$ bk pull
Pull bk://linuxusb.bkbits.net/udev/
-> file://home/kay/src/udev
---------------------- Receiving the following csets-----------------------
1.585 1.584 1.583 1.582 1.581 1.580 1.579 1.578 1.577 1.576
1.575
----------------------------------------------------------------------------
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id\x1356&alloc_id438&opÌk
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 11+ messages in thread