From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Tue, 23 Mar 2004 15:58:45 +0000 Subject: Re: Device removal does not generate hotplug events Message-Id: <20040323155845.GB30122@kroah.com> List-Id: References: <2F75A5CCEF1E6A4C8CA2E75CF7F529E9022B1348@orsmsx409.jf.intel.com> In-Reply-To: <2F75A5CCEF1E6A4C8CA2E75CF7F529E9022B1348@orsmsx409.jf.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Mon, Mar 22, 2004 at 04:35:01PM -0800, Sabharwal, Atul wrote: > I have a Linux system running 2.6.3 kernel, udev v 22. I have an array > of Qlogic Disk array which shows up as a SCSI device to the kernel. > > Now, when I do virtual insertion/deletion of devices, rules get called > and Device entries get created/deleted. ( using sysfs interface to > delete or Scan new devices ). > > Now, when I do physical insertion/deletions, the deletions do not work. > The sysfs Sub-system still shows the device under /sys although the > device has been physically Removed. Then this is a scsi kernel issue with your hardware. I suggest you ask this on the linux-scsi mailing list. good luck, greg k-h ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel