From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kay Sievers Date: Thu, 22 Apr 2004 21:28:36 +0000 Subject: Re: udev-test.pl failures Message-Id: <20040422212836.GA27375@vrfy.org> List-Id: References: <40880A7E.4050400@bulldog.unca.edu> In-Reply-To: <40880A7E.4050400@bulldog.unca.edu> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Thu, Apr 22, 2004 at 02:10:06PM -0400, Erik Harrison wrote: > I pulled the .25 release of udev, and built it on Slackware 9.1 with a > 2.6.2 kernel. I get three failures. Here is the output of the failing tests. > > TEST 69: big minor number test > device '/class/i2c-dev/i2c-300' expecting node 'node' > expected major:minor is: 89:300 > created major:minor is : 89:44 > major:minor: error add: ok remove: ok > > TEST 70: big major number test > device '/class/i2c-dev/i2c-fake1' expecting node 'node' > expected major:minor is: 4095:1 > created major:minor is : 255:1 > major:minor: error add: ok remove: ok > > TEST 71: big major and big minor number test > device '/class/i2c-dev/i2c-fake2' expecting node 'node' > expected major:minor is: 4094:89999 > created major:minor is : 255:143 > major:minor: error add: ok remove: ok Seems your glibc doesn't suppport the large dev_t. A compilation with klibc should work. (?) Kay ------------------------------------------------------- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th! http://www.thinkgeek.com/freeshipping/?cpg297 _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel