From: Simone Gotti <simone.gotti@email.it>
To: linux-hotplug@vger.kernel.org
Subject: Re: ude/hotplug/usbmount
Date: Fri, 25 Jun 2004 12:31:17 +0000 [thread overview]
Message-ID: <200406251431.17541.simone.gotti@email.it> (raw)
In-Reply-To: <20040625082939.D5CE4304114@xedo.net>
On Friday 25 June 2004 10:29, metzench@ccux.de wrote:
> Hi All!
>
> We are now using udev and hotplug for some months now, and so far
> everything works fine. But now i wanted to install the usb-mount
> script but it won't work when plugging in for example a usb stick,
> because hotplug generates the dive nodes too late! Here is what the
> logs say:
>
> DEVPATH=/devices/pci0000:00/0000:00:11.3/usb2/2-2/2-2.1/2-2.1:1.0
> Jun 25 01:36:18 CCuxAMD usb-mount:
> REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:11.3%usb2%2-2%2-
> 2.1%2-2.1:1.0
> Jun 25 01:36:18 CCuxAMD usb-mount: PATH=/bin:/sbin:/usr/sbin:/usr/bin
> Jun 25 01:36:18 CCuxAMD usb-mount: ACTIONd
> Jun 25 01:36:18 CCuxAMD usb-mount: PWD=/etc/hotplug
> Jun 25 01:36:18 CCuxAMD usb-mount: HOME=/
> Jun 25 01:36:18 CCuxAMD usb-mount: SHLVL=3
> Jun 25 01:36:18 CCuxAMD usb-mount: DEVICE=/proc/bus/usb/002/006
> Jun 25 01:36:18 CCuxAMD usb-mount: INTERFACE=8/5/80
> Jun 25 01:36:18 CCuxAMD usb-mount: PRODUCTTc/8b/1
> Jun 25 01:36:18 CCuxAMD usb-mount: TYPE=0/0/0
> Jun 25 01:36:18 CCuxAMD usb-mount: SEQNUM(9
> Jun 25 01:36:18 CCuxAMD usb-mount: _=/usr/bin/env
> Jun 25 01:36:18 CCuxAMD usb-mount: ------
> Jun 25 01:36:18 CCuxAMD scsi1 : SCSI emulation for USB Mass Storage
> devices
> Jun 25 01:36:18 CCuxAMD usb-mount: Cleaning up mounts for detached
> devices.
> Jun 25 01:36:18 CCuxAMD Vendor: Sony Model: Storage Media
> Rev: PROL
> Jun 25 01:36:18 CCuxAMD Type: Direct-Access
> ANSI SCSI revision: 02
> Jun 25 01:36:18 CCuxAMD usb-mount: Called to mount device
> /devices/pci0000:00/0000:00:11.3/usb2/2-2/2-2.1/2-2.1:1.0
> Jun 25 01:36:18 CCuxAMD usb-mount: DEVPATH yields SCSI host number 1
> Jun 25 01:36:18 CCuxAMD usb-mount: SCSI disk device for 1 is UNKNOWN
> Jun 25 01:36:18 CCuxAMD usb-mount: Disk device is UNKNOWN
> Jun 25 01:36:18 CCuxAMD usb-mount: SCSI disk device is UNKNOWN
> Jun 25 01:36:18 CCuxAMD usb-mount: Could not find device for
> /devices/pci0000:00/0000:00:11.3/usb2/2-2/2-2.1/2-2.1:1.0
> Jun 25 01:36:18 CCuxAMD usb-mount: Checking for unused mountpoints
> Jun 25 01:36:18 CCuxAMD SCSI device sda: 256000 512-byte hdwr sectors
> (131 MB)
> Jun 25 01:36:18 CCuxAMD sda: assuming Write Enabled
> Jun 25 01:36:18 CCuxAMD sda: sda1
> Jun 25 01:36:18 CCuxAMD Attached scsi removable disk sda at scsi1,
> channel 0, id 0, lun 0
> Jun 25 01:36:18 CCuxAMD Attached scsi generic sg0 at scsi1, channel
> 0, id 0, lun 0, type 0
>
> When i call usb-mount in a console, it works fine and the desktop
> icon gets created.
>
> Has anyone any suggestions for this?
>
> Best regards,
>
> Christian Metzen
If you are using udev, you have to put the script in /etc/dev.d and for
example in the block subdir (create it if it desn't exists). Then you have to
rename it with the .dev extension instead of the .hotplug
Because the script must be called after the nodes are created by udev.
Bye!
--
Simone Gotti
<simone.gotti@email.it>
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next prev parent reply other threads:[~2004-06-25 12:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-25 8:29 ude/hotplug/usbmount metzench
2004-06-25 12:31 ` Simone Gotti [this message]
2004-06-25 12:45 ` ude/hotplug/usbmount Marcelo Ricardo Leitner
2004-06-25 13:08 ` ude/hotplug/usbmount metzench
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200406251431.17541.simone.gotti@email.it \
--to=simone.gotti@email.it \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).