From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Cannings Date: Wed, 22 Sep 2004 11:06:21 +0000 Subject: USB printing support problems Message-Id: <200409221206.21695.lists@edeca.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org I have an Intel L440GX+ SMP motherboard which has two onboard USB ports. I am trying to get a Samsung ML-1210 printer, which works fine in Windows, to work with a 2.6.8 kernel (patched with the Gentoo patches). After compiling EHCI, OHCI and UHCI as modules and running hotplug, I get errors in syslog when a device is plugged in. There are no options in my BIOS concerning the onboard USB. Is there anything I can do to get USB working? I'm guessing it's a problem with the USB subsystem but am not sure where to turn for more information. Thanks, David -- Output from syslog upon plugging in a device -- kernel: usb 1-1: new full speed USB device using address 2 kernel: uhci_hcd 0000:00:12.2: uhci_result_control: failed with status 440000 kernel: [f73d9240] link (373d91e2) element (3730d040) kernel: 0: [f730d040] link (3730d080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID-(SETUP) (buf716f3a0) kernel: 1: [f730d080] link (00000001) e3 IOC Active Length=0 MaxLenf DT1 EndPt=0 Dev=0, PIDi(IN) (buf000000) kernel: kernel: uhci_hcd 0000:00:12.2: uhci_result_control: failed with status 440000 kernel: [f73d9240] link (373d91e2) element (3730d040) kernel: 0: [f730d040] link (3730d080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID-(SETUP) (buf716f3a0) kernel: 1: [f730d080] link (00000001) e3 IOC Active Length=0 MaxLenf DT1 EndPt=0 Dev=0, PIDi(IN) (buf000000) kernel: kernel: usb 1-1: device not accepting address 2, error -71 kernel: usb 1-1: new full speed USB device using address 3 kernel: uhci_hcd 0000:00:12.2: uhci_result_control: failed with status 440000 kernel: [f73d9240] link (373d91e2) element (3730d040) kernel: 0: [f730d040] link (3730d080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID-(SETUP) (buf716f3a0) kernel: 1: [f730d080] link (00000001) e3 IOC Active Length=0 MaxLenf DT1 EndPt=0 Dev=0, PIDi(IN) (buf000000) kernel: kernel: uhci_hcd 0000:00:12.2: uhci_result_control: failed with status 440000 kernel: [f73d9240] link (373d91e2) element (3730d040) kernel: 0: [f730d040] link (3730d080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID-(SETUP) (buf716f3a0) kernel: 1: [f730d080] link (00000001) e3 IOC Active Length=0 MaxLenf DT1 EndPt=0 Dev=0, PIDi(IN) (buf000000) kernel: kernel: usb 1-1: device not accepting address 3, error -71 -- Output for USB from 'lspci -v' -- 0000:00:12.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 64, IRQ 21 I/O ports at 2060 [size2] ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel