From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kay Sievers Date: Fri, 15 Oct 2004 11:20:26 +0000 Subject: Re: [ANNOUNCE] udev 038 release Message-Id: <20041015112026.GC5024@vrfy.org> List-Id: References: <20041014003936.GA8810@kroah.com> In-Reply-To: <20041014003936.GA8810@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Fri, Oct 15, 2004 at 11:07:56AM +0200, Prakash K. Cheemplavam wrote: > Hi, > > going from udev-036 to 038 on gentoo resulted in following problem for me: > > I load the nvidia module via /etc/modules.autoload.d/kernel-2.6. With > udev-036 the device nodes eventually were created fast enough so that > kdm could start. With udev-038 it is not the case. The boot ends at the > log-in, and I have to manually start kdm. > > What is the right way to get this going? Is there anything in the syslog regarding this? Do you use the latest bitkeeper version or the "real" v038? Kay ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel