* wait_for_sysfs needs an update to handle the device properly
@ 2004-10-13 20:25 Csan
2004-10-14 0:01 ` Greg KH
` (7 more replies)
0 siblings, 8 replies; 9+ messages in thread
From: Csan @ 2004-10-13 20:25 UTC (permalink / raw)
To: linux-hotplug
Hello all,
Call of duty, here I am! You asked for report, here it is:
:)
Oct 13 22:13:17 csanote kernel: usb 3-1: new full speed USB device using address 2
Oct 13 22:13:22 csanote wait_for_sysfs[30577]: error: wait_for_sysfs needs an
update to handle the device '/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0'
properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
Oct 13 22:13:22 csanote wait_for_sysfs[30576]: error: wait_for_sysfs needs an
update to handle the device '/devices/pci0000:00/0000:00:1d.1/usb3/3-1'
properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
Oct 13 22:13:24 csanote usb.agent[30583]: libgphoto2: loaded successfully
Oct 13 22:13:41 csanote kernel: usb 3-1: USB disconnect, address 2
This is a Kodak DC240 digital camera USB link.
The following messages could also be relevant:
Oct 13 22:17:10 csanote kernel: usb 3-1: usbfs: interface 0 claimed while
'gtkam' sets config #1
Oct 13 22:17:32 csanote last message repeated 2 times
By the way, when I start up gtkam, it show me the following message in an alert
window:
"
Could not list folders in '/'.
An error occurred in the io-library ('Could not find the requested device on the
USB port'): Could not find USB device (class 0x6, subclass 0xffffffff, protocol
0xffffffff). Make sure this device is connected to the computer.
"
But besides all that, I can browse the subdirs of the CF card, and I can
transfer pictures and files back-and-forth on the USB cable. Good job, thank you!
Just wanted to let you know since you asked :)
PS:
~# cat /proc/bus/usb/devices
T: Bus\x04 Lev\0 Prnt\0 Port\0 Cnt\0 Dev#= 1 Spd\x12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls (hub ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
P: Vendor\000 ProdID\000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-1-686 uhci_hcd
S: Product=Intel Corp. 82801DB (ICH4) USB UHCI #3
S: SerialNumber\000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr¿ MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls (hub ) Sub\0 Prot\0 Driver=hub
E: AdÅ(I) Atr\x03(Int.) MxPS= 2 Ivl%5ms
T: Bus\x03 Lev\0 Prnt\0 Port\0 Cnt\0 Dev#= 1 Spd\x12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls (hub ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
P: Vendor\000 ProdID\000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-1-686 uhci_hcd
S: Product=Intel Corp. 82801DB (ICH4) USB UHCI #2
S: SerialNumber\000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr¿ MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls (hub ) Sub\0 Prot\0 Driver=hub
E: AdÅ(I) Atr\x03(Int.) MxPS= 2 Ivl%5ms
T: Bus\x03 Lev\x01 Prnt\x01 Port\0 Cnt\x01 Dev#= 3 Spd\x12 MxCh= 0
D: Ver= 1.00 Cls\0(>ifc ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
P: Vendor\x040a ProdID\x0120 Rev= 1.08
S: ManufacturerÍstman Kodak Company
S: Product=KODAK DC240 Zoom Digital Camera
C:* #Ifs= 1 Cfg#= 1 Atr@ MxPwr\x100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls\0(>ifc ) Sub\0 Prot\0 Driver=(none)
E: Ad\x01(O) Atr\x02(Bulk) MxPS= 64 Ivl=0ms
E: AdÇ(I) Atr\x02(Bulk) MxPS= 64 Ivl=0ms
T: Bus\x02 Lev\0 Prnt\0 Port\0 Cnt\0 Dev#= 1 Spd\x12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls (hub ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
P: Vendor\000 ProdID\000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-1-686 uhci_hcd
S: Product=Intel Corp. 82801DB (ICH4) USB UHCI #1
S: SerialNumber\000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr¿ MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls (hub ) Sub\0 Prot\0 Driver=hub
E: AdÅ(I) Atr\x03(Int.) MxPS= 2 Ivl%5ms
T: Bus\x02 Lev\x01 Prnt\x01 Port\0 Cnt\x01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls\0(>ifc ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
P: Vendor da ProdID\018 Rev= 0.01
S: Manufacturer§Tech
S: Product=RF USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr† MxPwr\x100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls\x03(HID ) Sub\x01 Prot\x02 Driver=usbmouse
E: AdÅ(I) Atr\x03(Int.) MxPS= 4 Ivl\x10ms
T: Bus\x01 Lev\0 Prnt\0 Port\0 Cnt\0 Dev#= 1 SpdH0 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls (hub ) Sub\0 Prot\x01 MxPS= 8 #Cfgs= 1
P: Vendor\000 ProdID\000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-1-686 ehci_hcd
S: Product=Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
S: SerialNumber\000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr‡ MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls (hub ) Sub\0 Prot\0 Driver=hub
E: AdÅ(I) Atr\x03(Int.) MxPS= 2 Ivl%6ms
Respectfully,
Csan alias J·nos Hol·nyi
Debian Group leader - Association of Hungarian Linux Users
URL: http://www.lme.hu/ Email: csani AT lme.linux.hu
gpg --keyserver hkp://pgp.mit.edu --recv-keys 82CBB661
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: wait_for_sysfs needs an update to handle the device properly
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
@ 2004-10-14 0:01 ` Greg KH
2004-10-15 9:50 ` wait_for_sysfs needs an update to handle the device '/class/drm/radeon' properly Peter Van Eynde
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Greg KH @ 2004-10-14 0:01 UTC (permalink / raw)
To: linux-hotplug
On Wed, Oct 13, 2004 at 10:25:12PM +0200, Csan wrote:
> Hello all,
>
> Call of duty, here I am! You asked for report, here it is:
> :)
>
> Oct 13 22:13:17 csanote kernel: usb 3-1: new full speed USB device using address 2
> Oct 13 22:13:22 csanote wait_for_sysfs[30577]: error: wait_for_sysfs needs an
> update to handle the device '/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0'
> properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
> Oct 13 22:13:22 csanote wait_for_sysfs[30576]: error: wait_for_sysfs needs an
> update to handle the device '/devices/pci0000:00/0000:00:1d.1/usb3/3-1'
> properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
> Oct 13 22:13:24 csanote usb.agent[30583]: libgphoto2: loaded successfully
> Oct 13 22:13:41 csanote kernel: usb 3-1: USB disconnect, address 2
Thanks, this should be fixed in the next version of udev.
greg k-h
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* wait_for_sysfs needs an update to handle the device '/class/drm/radeon' properly
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
2004-10-14 0:01 ` Greg KH
@ 2004-10-15 9:50 ` Peter Van Eynde
2004-10-15 11:10 ` Kay Sievers
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Peter Van Eynde @ 2004-10-15 9:50 UTC (permalink / raw)
To: linux-hotplug
Got this message on my IBM R40.
If you need more information, just ask.
Groetjes, Peter
--
signature -at- pvaneynd.mailworks.org
http://www.livejournal.com/users/pvaneynd/
"God, root, what is difference?" Pitr | "God is more forgiving." Dave Aronson|
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: wait_for_sysfs needs an update to handle the device '/class/drm/radeon' properly
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
2004-10-14 0:01 ` Greg KH
2004-10-15 9:50 ` wait_for_sysfs needs an update to handle the device '/class/drm/radeon' properly Peter Van Eynde
@ 2004-10-15 11:10 ` Kay Sievers
2004-10-17 7:34 ` wait_for_sysfs needs an update to handle the device '/class/net/wlan0' properly Ralf Hildebrandt
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Kay Sievers @ 2004-10-15 11:10 UTC (permalink / raw)
To: linux-hotplug
On Fri, Oct 15, 2004 at 11:50:08AM +0200, Peter Van Eynde wrote:
> Got this message on my IBM R40.
>
> If you need more information, just ask.
This should not happen anymore since udev v035 (4 days ago).
Thanks,
Kay
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* wait_for_sysfs needs an update to handle the device '/class/net/wlan0' properly
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
` (2 preceding siblings ...)
2004-10-15 11:10 ` Kay Sievers
@ 2004-10-17 7:34 ` Ralf Hildebrandt
2004-10-17 11:10 ` Kay Sievers
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Ralf Hildebrandt @ 2004-10-17 7:34 UTC (permalink / raw)
To: linux-hotplug
When using ndiswrapper to load a driver, I get:
Oct 17 00:28:54 kasbah kernel: ndiswrapper version 0.11 loaded (preempt=yes,smp=no)
Oct 17 00:28:54 kasbah loadndisdriver: loadndisdriver: main(479): version 0.11 started
Oct 17 00:28:54 kasbah kernel: This driver (bcmwl5a) is not for your hardware. It's likely to work anyway but have it in mind if you have problem.
Oct 17 00:28:54 kasbah kernel: ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 10 (level, low) -> IRQ 10
Oct 17 00:28:54 kasbah kernel: ndiswrapper: using irq 10
Oct 17 00:28:54 kasbah udev: creating device node '/dev/ndiswrapper'
Oct 17 00:28:55 kasbah kernel: wlan0: ndiswrapper ethernet device 00:90:4b:57:40:c9 using driver bcmwl5a
Oct 17 00:28:55 kasbah kernel: wlan0: encryption modes supported: WEP, WPA with TKIP
Oct 17 00:28:55 kasbah kernel: ndiswrapper: driver bcmwl5a () added
Oct 17 00:28:55 kasbah pumpd[4960]: starting at (uptime 0 days, 0:01:19) Sun Oct 17 00:28:55 2004
Oct 17 00:28:55 kasbah pumpd[4960]: PUMP: sending discover
Oct 17 00:29:00 kasbah pumpd[4960]: got dhcp offer
Oct 17 00:29:00 kasbah pumpd[4960]: PUMP: sending second discover
Oct 17 00:29:00 kasbah pumpd[4960]: PUMP: got an offer
Oct 17 00:29:00 kasbah wait_for_sysfs[4956]: error: wait_for_sysfs needs an update to handle the device '/class/net/wlan0' properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
The card works, yet the warnign should probably be addressed anyway.
2.6.9-final
--
Ralf Hildebrandt (i.A. des IT-Zentrum) Ralf.Hildebrandt@charite.de
Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-8445-4447
IT-Zentrum Standort CBF AIM. ralfpostfix
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: wait_for_sysfs needs an update to handle the device '/class/net/wlan0' properly
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
` (3 preceding siblings ...)
2004-10-17 7:34 ` wait_for_sysfs needs an update to handle the device '/class/net/wlan0' properly Ralf Hildebrandt
@ 2004-10-17 11:10 ` Kay Sievers
2004-10-29 0:45 ` wait_for_sysfs needs an update to handle the device '/class/capi/capi' Marc Schiffbauer
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Kay Sievers @ 2004-10-17 11:10 UTC (permalink / raw)
To: linux-hotplug
On Sun, Oct 17, 2004 at 09:34:39AM +0200, Ralf Hildebrandt wrote:
> When using ndiswrapper to load a driver, I get:
>
> Oct 17 00:28:54 kasbah kernel: ndiswrapper version 0.11 loaded (preempt=yes,smp=no)
> Oct 17 00:28:54 kasbah loadndisdriver: loadndisdriver: main(479): version 0.11 started
> Oct 17 00:28:54 kasbah kernel: This driver (bcmwl5a) is not for your hardware. It's likely to work anyway but have it in mind if you have problem.
> Oct 17 00:28:54 kasbah kernel: ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 10 (level, low) -> IRQ 10
> Oct 17 00:28:54 kasbah kernel: ndiswrapper: using irq 10
> Oct 17 00:28:54 kasbah udev: creating device node '/dev/ndiswrapper'
> Oct 17 00:28:55 kasbah kernel: wlan0: ndiswrapper ethernet device 00:90:4b:57:40:c9 using driver bcmwl5a
> Oct 17 00:28:55 kasbah kernel: wlan0: encryption modes supported: WEP, WPA with TKIP
> Oct 17 00:28:55 kasbah kernel: ndiswrapper: driver bcmwl5a () added
> Oct 17 00:28:55 kasbah pumpd[4960]: starting at (uptime 0 days, 0:01:19) Sun Oct 17 00:28:55 2004
> Oct 17 00:28:55 kasbah pumpd[4960]: PUMP: sending discover
> Oct 17 00:29:00 kasbah pumpd[4960]: got dhcp offer
> Oct 17 00:29:00 kasbah pumpd[4960]: PUMP: sending second discover
> Oct 17 00:29:00 kasbah pumpd[4960]: PUMP: got an offer
> Oct 17 00:29:00 kasbah wait_for_sysfs[4956]: error: wait_for_sysfs needs an update to handle the device '/class/net/wlan0' properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
>
> The card works, yet the warnign should probably be addressed anyway.
> 2.6.9-final
I expect that the ndiswrapper doesn't create a "device" symlink to the
physical device in the /class/net/wlan0 directory, so the driver should
be fixed.
Thanks,
Kay
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* wait_for_sysfs needs an update to handle the device '/class/capi/capi'
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
` (4 preceding siblings ...)
2004-10-17 11:10 ` Kay Sievers
@ 2004-10-29 0:45 ` Marc Schiffbauer
2004-10-29 1:05 ` wait_for_sysfs needs an update to handle the device '/class/firmware/0000:01:0d.0' Marc Schiffbauer
2004-10-30 3:17 ` Kay Sievers
7 siblings, 0 replies; 9+ messages in thread
From: Marc Schiffbauer @ 2004-10-29 0:45 UTC (permalink / raw)
To: linux-hotplug
is that already known?
keep up the good work, many thanks!
Oct 28 20:18:32 localhost wait_for_sysfs[2690]: error: wait_for_sysfs needs an update to handle the device
'/class/capi/capi' properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
-marc
--
8AAC 5F46 83B4 DB70 8317 3723 296C 6CCA 35A6 4134
-------------------------------------------------------
This Newsletter Sponsored by: Macrovision
For reliable Linux application installations, use the industry's leading
setup authoring tool, InstallShield X. Learn more and evaluate
today. http://clk.atdmt.com/MSI/go/ins0030000001msi/direct/01/
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* wait_for_sysfs needs an update to handle the device '/class/firmware/0000:01:0d.0'
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
` (5 preceding siblings ...)
2004-10-29 0:45 ` wait_for_sysfs needs an update to handle the device '/class/capi/capi' Marc Schiffbauer
@ 2004-10-29 1:05 ` Marc Schiffbauer
2004-10-30 3:17 ` Kay Sievers
7 siblings, 0 replies; 9+ messages in thread
From: Marc Schiffbauer @ 2004-10-29 1:05 UTC (permalink / raw)
To: linux-hotplug
Oct 28 22:59:01 localhost wait_for_sysfs[4855]: error: wait_for_sysfs needs an update to handle the device
'/class/firmware/0000:01:0d.0' properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
is this useful to just send those messages?
regards
-marc
--
<NES> *lol* I download something from Napster
<NES> And the same guy I downloaded it from starts downloading it from me when I'm done
<NES> I message him and say "What are you doing? I just got that from you"
<NES> "getting my song back fscker"
-------------------------------------------------------
This Newsletter Sponsored by: Macrovision
For reliable Linux application installations, use the industry's leading
setup authoring tool, InstallShield X. Learn more and evaluate
today. http://clk.atdmt.com/MSI/go/ins0030000001msi/direct/01/
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: wait_for_sysfs needs an update to handle the device '/class/firmware/0000:01:0d.0'
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
` (6 preceding siblings ...)
2004-10-29 1:05 ` wait_for_sysfs needs an update to handle the device '/class/firmware/0000:01:0d.0' Marc Schiffbauer
@ 2004-10-30 3:17 ` Kay Sievers
7 siblings, 0 replies; 9+ messages in thread
From: Kay Sievers @ 2004-10-30 3:17 UTC (permalink / raw)
To: linux-hotplug
On Fri, Oct 29, 2004 at 03:05:02AM +0200, Marc Schiffbauer wrote:
> Oct 28 22:59:01 localhost wait_for_sysfs[4855]: error: wait_for_sysfs needs an update to handle the device
> '/class/firmware/0000:01:0d.0' properly, please report to <linux-hotplug-devel@lists.sourceforge.net>
This is already fixed in a later version of udev.
> is this useful to just send those messages?
Sure it is.
But I really hope that there are not too much uncovered devices left and
we get rid of these messages soon :)
Thanks,
Kay
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_idU88&alloc_id\x12065&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2004-10-30 3:17 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-13 20:25 wait_for_sysfs needs an update to handle the device properly Csan
2004-10-14 0:01 ` Greg KH
2004-10-15 9:50 ` wait_for_sysfs needs an update to handle the device '/class/drm/radeon' properly Peter Van Eynde
2004-10-15 11:10 ` Kay Sievers
2004-10-17 7:34 ` wait_for_sysfs needs an update to handle the device '/class/net/wlan0' properly Ralf Hildebrandt
2004-10-17 11:10 ` Kay Sievers
2004-10-29 0:45 ` wait_for_sysfs needs an update to handle the device '/class/capi/capi' Marc Schiffbauer
2004-10-29 1:05 ` wait_for_sysfs needs an update to handle the device '/class/firmware/0000:01:0d.0' Marc Schiffbauer
2004-10-30 3:17 ` Kay Sievers
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).