usb pen usb.usermap problem

usb pen usb.usermap problem

[hy2]

hy list,

i would run a bash script when i plug-in my usb pen.
the script is /etc/hotplug/usb/usb-stylo.

so i added this line to /etc/hotplug/usb.usermap.

usb-stilo       0x000f 0x0ea0 0x6803    0x0000 0x0000   
0x00 0x00 0x00 0x00 0x00 0x00           0x00000000

i don't know how to set the 1th field (match_flags) but about
the 2th end 3th i'm sure they are right.

i restarted hotplug subsystem but nothing is happened.
hotpulg does not run the script.

how can i solve this ?


tnx, regards.

-- 
>here are more things in heaven and earth,
horatio, than are dreamt of in your philosophy.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb pen usb.usermap problem

[hy2]

> usb-stylo != usb-stilo
> Spelling error?
language error, i'm italian :)


> > i don't know how to set the 1th field (match_flags) but about
> > the 2th end 3th i'm sure they are right.
> Look at /etc/hotplug/usb.agent:
yes, hight bash scripting.

i need to match vendor && product so i changed match_flags to 
0x0003 (right?) and i have corrected the script name.

but if..
# lsusb
Bus 003 Device 005: ID 0ea0:6803 Ours Technology, Inc. OTI-6803 Flash Disk

is the target device plugged-in.
why the script /etc/hotplug/usb/usb-stylo is still ignored?

which kind of test can i perform to understand where my configuration fails?

best regards.

-- 
>here are more things in heaven and earth,
horatio, than are dreamt of in your philosophy.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb pen usb.usermap problem

[hy2]

> Just uncomment:
>   # DEBUG=yes; export DEBUG
> 
done.

this is the report:
Dec  9 14:58:01 alea default.hotplug[5728]: arguments (scsi) env (OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host5/5:0:0:0 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION­d PWD=/etc/hotplugHOME=/ SHLVL=2 DEBUG=yes SEQNUM‡6 _=/bin/env)
Dec  9 14:58:01 alea default.hotplug[5744]: no runnable /etc/hotplug/scsi_generic.agent is installed
Dec  9 14:58:01 alea default.hotplug[5728]: invoke /etc/hotplug/scsi.agent ()
Dec  9 14:58:01 alea scsi.agent[5728]: disk at /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host5/5:0:0:0
Dec  9 14:58:02 alea usb.agent[5723]: Setup usb-stylo for USB product ea0/6803/100
Dec  9 14:58:02 alea usb.agent[5723]: Module setup usb-stylo for USB product ea0/6803/100

# ls -l scsi.agent
-rwxr-xr-x  1 root root 1459 Nov 20 07:08 scsi.agent

it is runnable !

# ls -l usb-stylo
-rwxr-xr-x  1 root root 64 Dec  9 15:02 usb-stylo

# cat usb-stylo
#!/bin/sh

mount /var/aes			 
echo good
echo test > /tmp/test-good	# only this line works

the problem is in the mount command? 

/dev/hda6       /var/aes        jfs             exec,user,noauto,encryption®s-256,loop=/dev/loop7,keygen=/home/hy2/bin/aes_key_gen    0 0

/home/hy2/bin/aes_key_gen	
mounts the key and reads some bites used as passphrase for aes-256 cfs.
then it umounts the key.

if i run mount /var/aes all this works.



thank you very much. saiph


-- 
>here are more things in heaven and earth,
horatio, than are dreamt of in your philosophy.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb pen usb.usermap problem

[Kay Sievers]

On Thu, 2004-12-09 at 08:39 +0100, hy2 wrote:
> hy list,
> 
> i would run a bash script when i plug-in my usb pen.
> the script is /etc/hotplug/usb/usb-stylo.
> 
> so i added this line to /etc/hotplug/usb.usermap.
> 
> usb-stilo       0x000f 0x0ea0 0x6803    0x0000 0x0000   0x00 0x00 0x00 0x00 0x00 0x00           0x00000000

usb-stylo != usb-stilo

Spelling error?

> i don't know how to set the 1th field (match_flags) but about
> the 2th end 3th i'm sure they are right.

Look at /etc/hotplug/usb.agent:
  USB_MATCH_VENDOR=$((0x0001))
  USB_MATCH_PRODUCT=$((0x0002))
  USB_MATCH_DEV_LO=$((0x0004))
  USB_MATCH_DEV_HI=$((0x0008))
  USB_MATCH_DEV_CLASS=$((0x0010))
  USB_MATCH_DEV_SUBCLASS=$((0x0020))
  USB_MATCH_DEV_PROTOCOL=$((0x0040))
  USB_MATCH_INT_CLASS=$((0x0080))
  USB_MATCH_INT_SUBCLASS=$((0x0100))
  USB_MATCH_INT_PROTOCOL=$((0x0200))

Good luck,
Kay



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: usb pen usb.usermap problem

[Kay Sievers]

On Thu, 2004-12-09 at 14:10 +0100, hy2 wrote:
> > usb-stylo != usb-stilo
> > Spelling error?
> language error, i'm italian :)

:)

> > > i don't know how to set the 1th field (match_flags) but about
> > > the 2th end 3th i'm sure they are right.
> > Look at /etc/hotplug/usb.agent:
> yes, hight bash scripting.
> 
> i need to match vendor && product so i changed match_flags to 
> 0x0003 (right?) and i have corrected the script name.

Seems right.

> but if..
> # lsusb
> Bus 003 Device 005: ID 0ea0:6803 Ours Technology, Inc. OTI-6803 Flash Disk
> 
> is the target device plugged-in.
> why the script /etc/hotplug/usb/usb-stylo is still ignored?

Is the script executable? Does it run if you call it from the
commandline?

> which kind of test can i perform to understand where my configuration fails?

Just uncomment:
  # DEBUG=yes; export DEBUG

in /etc/hotplug/hotplug.functions.

Here is my test. Works by calling "my-mouse" which just logs the env:

  default.hotplug[11643]: invoke /etc/hotplug/usb.agent ()
  usb.agent[11643]: Setup my-mouse 0x06 0x06 for USB product 46d/c03e/2000
  usb.agent[11643]: Module setup my-mouse for USB product 46d/c03e/2000
  logger: SUBSYSTEM=usb WORKS=1 DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0 ...

Kay



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel