From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Brownell Date: Tue, 11 Jan 2005 04:04:03 +0000 Subject: Re: Hotplug: Reset/Reload of a USB-device using EZ-USB Message-Id: <200501102004.04282.david-b@pacbell.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-hotplug@vger.kernel.org On Wednesday 01 December 2004 10:31 am, Per-Arne S=F6derkvist wrote: > Hello! >=20 > "We" are new into this and have now a question in this subject. >=20 > We have managed to add hotplug "scripts/files" to load the hex-file to a > USB-device using EZ-USB, it works most of the time. But sometimes somethi= ng > goes wrong (can't communicate correct with the device) and we want to > reset/reload the device, similar what happens if the USB-cable is > disconnected/connected to the computer. I.e. how to do this from a progra= m? You should be able to do this just by running fxload against the device, assuming your firmware forces re-enumeration. - Dave >=20 > PS. > We uses Fedora Core 2 with kernel 2.6.5-1.358 > DS. >=20 >=20 > Best Regards, >=20 > Per-Arne S=F6derkvist with friends;) >=20 >=20 ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel