linux-hotplug.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roman Kagan <rkagan@mail.ru>
To: linux-hotplug@vger.kernel.org
Subject: Re: [ANNOUNCE] hotplug-ng 001 release
Date: Tue, 22 Feb 2005 10:35:03 +0000	[thread overview]
Message-ID: <20050222103502.GA11284@katya> (raw)
In-Reply-To: <20050211004033.GA26624@suse.de>

On Mon, Feb 21, 2005 at 09:40:04PM +0100, Erik van Konijnenburg wrote:
> Here are some samples from modules.alias:
> 	alias usb:v097Ap0001dl0000dh0001dc*dsc*dp*ic*isc*ip* usb_storage
> 	alias usb:v05A9p0511dl*dh*dc*dsc*dp*ic*isc*ip* ov511
> 
> And the read_config_file function in modprobe.c simply does a shell
> style wildcard match.
> 
> How can wildcard matching in modprobe against these aliases give the same
> result as a numeric range comparison on DEV_LO and DEV_HI in kernel and
> hotplug agents?
> 
> Since I don't know what modules.aliases was originally intended for,
> I may be missing something obvious.  Any hints appreciated.

That wasn't you who missed something obvious :)  Actually this problem
existed since day 0 and presumably was due to the fact that USB was (and
still is) the only kind which used numeric ranges and thus had two
parameters to match a single value against, which was probably
overlooked when scripts/mod/file2alias.c was written.

The only solution I could come up with was to modify that file to
generate multiple patterns (and thus MODULE_ALIAS strings) out of a
usb_match_id which defined a range of bcdDevice values, e.g. given a
range between 0x0001 and 0xa345 it would create 7 patterns:

000[1-F]*
00[1-F]*
0[1-F]*
[1-9]*
A[0-2]*
A3[0-3]*
A34[0-5]*

Since bcdDevice is 2 bytes wide = 4 digits in hex representation, the
max no. of patters is 2 * 4 - 1 = 7.

The attached patch does this.  Please comment and consider applying.

Thanks,
  Roman.


--- linux-2.6.11-rc4/scripts/mod/file2alias.c.orig	2005-02-13 10:06:23.000000000 +0300
+++ linux-2.6.11-rc4/scripts/mod/file2alias.c	2005-02-22 12:58:05.849081056 +0300
@@ -47,32 +47,19 @@
                 sprintf(str + strlen(str), "*");                \
 } while(0)
 
-/* Looks like "usb:vNpNdlNdhNdcNdscNdpNicNiscNipN" */
-static int do_usb_entry(const char *filename,
-			struct usb_device_id *id, char *alias)
+/* USB is special because the bcdDevice can be matched against a numeric range */
+/* Looks like "usb:vNpNdNdcNdscNdpNicNiscNipN" */
+static void do_usb_entry(struct usb_device_id *id, const char *bcdDevice_pattern,
+			 struct module *mod)
 {
-	id->match_flags = TO_NATIVE(id->match_flags);
-	id->idVendor = TO_NATIVE(id->idVendor);
-	id->idProduct = TO_NATIVE(id->idProduct);
-	id->bcdDevice_lo = TO_NATIVE(id->bcdDevice_lo);
-	id->bcdDevice_hi = TO_NATIVE(id->bcdDevice_hi);
-
-	/*
-	 * Some modules (visor) have empty slots as placeholder for
-	 * run-time specification that results in catch-all alias
-	 */
-	if (!(id->idVendor | id->bDeviceClass | id->bInterfaceClass))
-		return 1;
-
+	char alias[500];
 	strcpy(alias, "usb:");
 	ADD(alias, "v", id->match_flags&USB_DEVICE_ID_MATCH_VENDOR,
 	    id->idVendor);
 	ADD(alias, "p", id->match_flags&USB_DEVICE_ID_MATCH_PRODUCT,
 	    id->idProduct);
-	ADD(alias, "dl", id->match_flags&USB_DEVICE_ID_MATCH_DEV_LO,
-	    id->bcdDevice_lo);
-	ADD(alias, "dh", id->match_flags&USB_DEVICE_ID_MATCH_DEV_HI,
-	    id->bcdDevice_hi);
+	strcat(alias, "d");
+	strcat(alias, bcdDevice_pattern);
 	ADD(alias, "dc", id->match_flags&USB_DEVICE_ID_MATCH_DEV_CLASS,
 	    id->bDeviceClass);
 	ADD(alias, "dsc",
@@ -90,7 +77,104 @@
 	ADD(alias, "ip",
 	    id->match_flags&USB_DEVICE_ID_MATCH_INT_PROTOCOL,
 	    id->bInterfaceProtocol);
-	return 1;
+
+	/* Always end in a wildcard, for future extension */
+	if (alias[strlen(alias)-1] != '*')
+		strcat(alias, "*");
+	buf_printf(&mod->dev_table_buf,
+		   "MODULE_ALIAS(\"%s\");\n", alias);
+}
+
+
+static inline size_t sprint_pattern(char *str, int ndigits, unsigned int initial,
+				  unsigned char clo, unsigned char chi)
+{
+	if (ndigits) {
+		if (clo = chi)
+			return sprintf(str, "%0*X%X*", ndigits, initial, clo);
+		if (clo = 0x0 && chi = 0xf)
+			return sprintf(str, "%0*X*", ndigits, initial);
+		return sprintf(str, "%0*X[%X-%X]*", ndigits, initial, clo, chi);
+	}
+	else {
+		if (clo = chi)
+			return sprintf(str, "%X*", clo);
+		if (clo = 0x0 && chi = 0xf)
+			return sprintf(str, "*");
+		return sprintf(str, "[%X-%X]*", clo, chi);
+	}
+}
+
+static void do_usb_entry_multi(struct usb_device_id *id, struct module *mod)
+{
+	unsigned int devlo, devhi;
+	unsigned char chi, clo;
+	int ndigits;
+	char pattern[32];
+
+	id->match_flags = TO_NATIVE(id->match_flags);
+	id->idVendor = TO_NATIVE(id->idVendor);
+	id->idProduct = TO_NATIVE(id->idProduct);
+
+	devlo = id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO ?
+		TO_NATIVE(id->bcdDevice_lo) : 0x0U;
+	devhi = id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI ?
+		TO_NATIVE(id->bcdDevice_hi) : ~0x0U;
+
+	/*
+	 * Some modules (visor) have empty slots as placeholder for
+	 * run-time specification that results in catch-all alias
+	 */
+	if (!(id->idVendor | id->bDeviceClass | id->bInterfaceClass))
+		return;
+
+	/* Convert numeric bcdDevice range into fnmatch-able pattern(s) */
+	for (ndigits = sizeof(id->bcdDevice_lo) * 2 - 1; 1; ndigits--) {
+		clo = devlo & 0xf;
+		chi = devhi & 0xf;
+		devlo >>= 4;
+		devhi >>= 4;
+
+		if (devlo = devhi || !ndigits) {
+			if (clo <= chi) {
+				sprint_pattern(pattern, ndigits, devlo, clo, chi);
+				do_usb_entry(id, pattern, mod);
+				printf("%s\n", pattern);
+			}
+			break;
+		}
+
+		if (clo != 0x0) {
+			sprint_pattern(pattern, ndigits, devlo, clo, 0xf);
+			do_usb_entry(id, pattern, mod);
+			printf("%s\n", pattern);
+			devlo++;
+		}
+
+		if (chi != 0xf) {
+			sprint_pattern(pattern, ndigits, devhi, 0x0, chi);
+			do_usb_entry(id, pattern, mod);
+			printf("%s\n", pattern);
+			devhi--;
+		}
+	}
+}
+
+static void do_usb_table(void *symval, unsigned long size,
+			 struct module *mod)
+{
+	unsigned int i;
+	const unsigned long id_size = sizeof(struct usb_device_id);
+
+	if (size % id_size || size < id_size) {
+		fprintf(stderr, "*** Warning: %s ids %lu bad size "
+			"(each on %lu)\n", mod->name, size, id_size);
+	}
+	/* Leave last one: it's the terminator. */
+	size -= id_size;
+
+	for (i = 0; i < size; i += id_size)
+		do_usb_entry_multi(symval + i, mod);
 }
 
 /* Looks like: ieee1394:venNmoNspNverN */
@@ -262,8 +346,8 @@
 		do_table(symval, sym->st_size, sizeof(struct pci_device_id),
 			 do_pci_entry, mod);
 	else if (sym_is(symname, "__mod_usb_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct usb_device_id),
-			 do_usb_entry, mod);
+		/* special case to handle bcdDevice ranges */
+		do_usb_table(symval, sym->st_size, mod);
 	else if (sym_is(symname, "__mod_ieee1394_device_table"))
 		do_table(symval, sym->st_size, sizeof(struct ieee1394_device_id),
 			 do_ieee1394_entry, mod);


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

  parent reply	other threads:[~2005-02-22 10:35 UTC|newest]

Thread overview: 148+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-11  0:40 [ANNOUNCE] hotplug-ng 001 release Greg KH
2005-02-11  0:52 ` Greg KH
2005-02-11  1:30   ` Kasper Sandberg
2005-02-11  6:41     ` Greg KH
2005-02-11 11:47       ` Kasper Sandberg
2005-02-11 17:06         ` Greg KH
2005-02-12  0:02           ` Kasper Sandberg
2005-02-11  1:07 ` Patrick McFarland
2005-02-11  1:16   ` Greg KH
2005-02-11 20:40     ` Vojtech Pavlik
2005-02-14  4:06     ` Lee Revell
2005-02-14  8:32       ` Paolo Ciarrocchi
2005-02-14  8:51         ` Prakash Punnoor
2005-02-14 23:04           ` Lee Revell
2005-02-14 23:16             ` Greg KH
2005-02-14 23:28               ` Lee Revell
2005-02-15 15:15                 ` Stefan Seyfried
2005-02-15 20:12                   ` kernel
2005-02-14 23:21             ` Roland Dreier
2005-02-14 23:45               ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 Lee Revell
2005-02-15  0:16                 ` Tim Bird
2005-02-15  1:17                   ` Lee Revell
2005-02-15  1:45                     ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 release) Kyle Moffett
2005-02-15  7:32                       ` Gábor Lénárt
2005-02-15  8:34                         ` Paolo Ciarrocchi
2005-02-15  9:27                           ` [OT] speeding boot process Bernd Petrovitsch
2005-02-15  8:55                       ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 Helge Hafting
2005-02-15  9:33                         ` Bernd Petrovitsch
2005-02-15 13:20                           ` Helge Hafting
2005-02-15 13:28                             ` Paulo Marques
2005-02-15 13:50                             ` Bernd Petrovitsch
2005-02-15  3:38                     ` Jim Crilly
2005-02-15  5:52                       ` Nigel Cunningham
2005-02-15  6:15                         ` Jim Crilly
2005-02-15  6:39                           ` Nigel Cunningham
2005-02-15 19:32                           ` Lee Revell
2005-02-17 18:37                     ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 release) jlnance
2005-02-17 19:18                       ` Chris Larson
2005-02-19  5:53                         ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 Jim Crilly
2005-02-17 19:58                       ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 release) Helge Hafting
2005-02-19  5:56                         ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 Jim Crilly
2005-02-19 22:47                           ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 release) Helge Hafting
2005-02-20  2:09                             ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 Jim Crilly
2005-02-15  8:33                 ` [OT] speeding boot process (was Re: [ANNOUNCE] hotplug-ng 001 release) Paolo Ciarrocchi
2005-02-14 23:43             ` [ANNOUNCE] hotplug-ng 001 release Diego Calleja
2005-02-15 19:51               ` Lee Revell
2005-02-15 21:02                 ` Diego Calleja
2005-02-15 21:32                   ` Chris Friesen
2005-02-15 21:09                 ` Valdis.Kletnieks
2005-02-15 19:56               ` Optimizing disk-I/O [was Re: [ANNOUNCE] hotplug-ng 001 release] Linas Vepstas
2005-02-15 20:46                 ` Adam Goode
2005-02-15 21:11                   ` Diego Calleja
2005-02-15 21:21                 ` Valdis.Kletnieks
2005-02-11  3:18 ` [ANNOUNCE] hotplug-ng 001 release Bill Nottingham
2005-02-11  6:46   ` Greg KH
2005-02-11 16:19     ` Christian Bornträger
2005-02-11 17:01       ` Greg KH
2005-02-11 19:01         ` Erik Andersen
2005-02-11 19:23           ` Greg KH
2005-02-11 21:37             ` Erik van Konijnenburg
2005-02-11 21:49               ` Greg KH
2005-02-11 22:06                 ` Erik van Konijnenburg
2005-02-11 22:13                   ` Greg KH
2005-02-12  0:48                     ` Ingo Oeser
2005-02-14 22:43                       ` Greg KH
2005-02-11  8:10 ` Roman Kagan
2005-02-11  8:17 ` Greg KH
2005-02-11  9:52 ` Olivier Galibert
2005-02-11 17:08   ` Greg KH
2005-02-11 10:53 ` Roman Kagan
2005-02-11 17:41 ` Christian Bornträger
2005-02-11 18:15 ` Greg KH
2005-02-11 18:47 ` Marco d'Itri
2005-02-11 19:33 ` Greg KH
2005-02-11 19:36 ` Greg KH
2005-02-11 19:40 ` Marco d'Itri
2005-02-11 19:57 ` Greg KH
2005-02-11 20:06 ` Harald Dunkel
2005-02-11 21:01   ` Greg KH
2005-02-12  8:30     ` Harald Dunkel
2005-02-14 22:36       ` Greg KH
2005-02-15  5:39         ` Harald Dunkel
2005-02-15  7:14           ` Greg KH
2005-02-11 20:10 ` Marco d'Itri
2005-02-11 20:11 ` Roman Kagan
2005-02-11 20:20 ` Marco d'Itri
2005-02-11 20:44 ` Roman Kagan
2005-02-11 20:46 ` Roman Kagan
2005-02-11 20:56 ` Marco d'Itri
2005-02-11 21:01 ` Kay Sievers
2005-02-11 21:10 ` Greg KH
2005-02-17  6:46   ` Michael Tokarev
2005-02-11 21:21 ` Kay Sievers
2005-02-11 21:30 ` Greg KH
2005-02-11 21:33 ` Greg KH
2005-02-11 21:54 ` Marco d'Itri
2005-02-11 21:57 ` Greg KH
2005-02-11 22:05 ` Bill Nottingham
2005-02-11 22:12 ` Greg KH
2005-02-11 22:13 ` Roman Kagan
2005-02-11 22:16 ` Marco d'Itri
2005-02-11 22:18 ` Marco d'Itri
2005-02-11 22:45 ` Roman Kagan
2005-02-11 22:55 ` Roman Kagan
2005-02-11 23:05 ` Erik van Konijnenburg
2005-02-11 23:17 ` Marco d'Itri
2005-02-11 23:29 ` Roman Kagan
2005-02-11 23:35 ` Marco d'Itri
2005-02-12  0:10 ` Roman Kagan
2005-02-12  0:17 ` Marco d'Itri
2005-02-12  0:34 ` Roman Kagan
2005-02-12 11:43 ` Pozsár Balázs
2005-02-12 12:10 ` Roman Kagan
2005-02-12 16:27 ` Alexander E. Patrakov
2005-02-14 22:42 ` Greg KH
2005-02-15  7:34 ` Greg KH
2005-02-15  8:15 ` Christian Zoz
2005-02-15 10:25 ` Alexander E. Patrakov
2005-02-15 12:20 ` [sane-devel] " Julien BLACHE
2005-02-16 10:51 ` Roman Kagan
2005-02-16 11:07 ` Roman Kagan
2005-02-16 11:11 ` Marco d'Itri
2005-02-16 11:18 ` Roman Kagan
2005-02-16 11:27 ` Roman Kagan
2005-02-16 12:37 ` Kay Sievers
2005-02-16 15:17 ` Roman Kagan
2005-02-16 16:08 ` Kay Sievers
2005-02-16 23:02 ` Willem Riede
2005-02-16 23:17 ` Roman Kagan
2005-02-16 23:32 ` Willem Riede
2005-02-18 17:17   ` Patrick Mansfield
2005-02-18 18:11     ` Roman Kagan
2005-02-18 18:33       ` Patrick Mansfield
2005-02-18 19:41         ` Roman Kagan
2005-02-18 20:17           ` Patrick Mansfield
2005-02-17  9:12 ` Roman Kagan
2005-02-21 20:40 ` Erik van Konijnenburg
2005-02-22 10:35 ` Roman Kagan [this message]
2005-02-23  0:44 ` Erik van Konijnenburg
2005-02-23 11:40 ` Roman Kagan
2005-02-23 13:04 ` Erik van Konijnenburg
2005-02-24  6:27 ` Roman Kagan
2005-02-24 19:28 ` Erik van Konijnenburg
2005-02-25 22:07 ` Greg KH
2005-02-25 22:07 ` Greg KH
2005-02-25 22:11 ` Greg KH
2005-02-25 22:12 ` Greg KH
2005-02-26 17:13 ` Roman Kagan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050222103502.GA11284@katya \
    --to=rkagan@mail.ru \
    --cc=linux-hotplug@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).