* problem with 3com 3CRWE62092B wlan card (atmel chipset)
@ 2005-05-03 11:47 Alexander harsch
2005-05-03 18:13 ` Kay Sievers
0 siblings, 1 reply; 2+ messages in thread
From: Alexander harsch @ 2005-05-03 11:47 UTC (permalink / raw)
To: linux-hotplug
Hello developers,
when I plug in my 3com 3CRWE62092B wlan card, I find the logs appended
in /var/log/messages. Sometimes, the card does not get recognized at all.
Sometimes, I can work with it without problems. If the card does not get
recognized during start, it can be used by simpy re-plugging it in. The logs
say, that you might be interested in this debug messages, so this is why I
send it to you. If you have any further questions, I will certainly answer
them if I can.
May 3 13:12:30 nb-harsch cardmgr[7301]: watching 2 sockets
May 3 13:12:30 nb-harsch cs: IO port probe 0xc00-0xcff: clean.
May 3 13:12:30 nb-harsch cs: IO port probe 0xc00-0xcff: clean.
May 3 13:12:30 nb-harsch cs: IO port probe 0x800-0x8ff: clean.
May 3 13:12:30 nb-harsch cs: IO port probe 0x800-0x8ff: clean.
May 3 13:12:30 nb-harsch cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f
0x360-0x367 0x4d0-0x4d7
May 3 13:12:30 nb-harsch cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f
0x360-0x367 0x4d0-0x4d7
May 3 13:12:30 nb-harsch cs: IO port probe 0xa00-0xaff: clean.
May 3 13:12:30 nb-harsch cs: IO port probe 0xa00-0xaff: clean.
May 3 13:12:30 nb-harsch cardmgr[7301]: starting, version is 3.2.5
May 3 13:12:30 nb-harsch cardmgr[7301]: socket 0: 3Com 3CRWE62092B 11Mbps
WLAN PC Card
May 3 13:12:31 nb-harsch eth1: MAC address 00:04:75:cc:6a:46
May 3 13:12:31 nb-harsch eth1: Atmel at76c50x wireless. Version 0.96
simon@thekelleys.org.uk
May 3 13:12:31 nb-harsch eth1: 3com 3CRWE62092B index 0x01: Vcc 3.3, irq 3,
io 0x0100-0x011f
May 3 13:12:31 nb-harsch wait_for_sysfs[7303]: error: unknown bus, please
report to <linux-hotplug-devel@lists.sourceforge.
net> 'pcmcia'
May 3 13:12:31 nb-harsch wait_for_sysfs[7303]: either wait_for_sysfs (udev
045) needs an update to handle the device '/devi
ces/pci0000:00/0000:00:1e.0/0000:01:0f.0/0.0' properly (unknown bus) or the
sysfs-support of your device's driver needs to b
e fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
May 3 13:12:31 nb-harsch cardmgr[7301]: executing: './network start eth1'
May 3 13:12:31 nb-harsch cardmgr[7301]: + * Bringing eth1 up
(192.168.99.2)... [ ok ]
May 3 13:12:31 nb-harsch cardmgr[7301]: unsupported card in socket 1
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.
Get your fingers limbered up and give it your best shot. 4 great events, 4
opportunities to win big! Highest score wins.NEC IT Guy Games. Play to
win an NEC 61 plasma display. Visit http://www.necitguy.com/?r
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: problem with 3com 3CRWE62092B wlan card (atmel chipset)
2005-05-03 11:47 problem with 3com 3CRWE62092B wlan card (atmel chipset) Alexander harsch
@ 2005-05-03 18:13 ` Kay Sievers
0 siblings, 0 replies; 2+ messages in thread
From: Kay Sievers @ 2005-05-03 18:13 UTC (permalink / raw)
To: linux-hotplug
On Tue, 2005-05-03 at 13:47 +0200, Alexander harsch wrote:
> Hello developers,
>
> when I plug in my 3com 3CRWE62092B wlan card, I find the logs appended
> in /var/log/messages. Sometimes, the card does not get recognized at all.
> Sometimes, I can work with it without problems. If the card does not get
> recognized during start, it can be used by simpy re-plugging it in. The logs
> say, that you might be interested in this debug messages, so this is why I
> send it to you. If you have any further questions, I will certainly answer
> them if I can.
> May 3 13:12:31 nb-harsch wait_for_sysfs[7303]: error: unknown bus, please
> report to <linux-hotplug-devel@lists.sourceforge.
> net> 'pcmcia'
That must be an ancient version of udev. You may upgrade it to get rid
of this message. But updating udev will not make your card working
better, cause it's more a driver- and not a hotplug issue.
Thanks,
Kay
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.
Get your fingers limbered up and give it your best shot. 4 great events, 4
opportunities to win big! Highest score wins.NEC IT Guy Games. Play to
win an NEC 61 plasma display. Visit http://www.necitguy.com/?r
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-05-03 18:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-03 11:47 problem with 3com 3CRWE62092B wlan card (atmel chipset) Alexander harsch
2005-05-03 18:13 ` Kay Sievers
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).