From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kay Sievers Date: Mon, 22 Aug 2005 21:15:14 +0000 Subject: Re: Run hotplug scripts after device node is created? Message-Id: <20050822211514.GA18656@vrfy.org> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Mon, Aug 22, 2005 at 10:45:49PM +0200, Stefan Schweizer wrote: > I use a hotplug script to download the firmware to my hp printer. This > is needed for HP Laserjet 1000,1005 and 1020. The procedure is just > cat firmware > /dev/usb/lp* > > The problem is that /dev/usb/lp* has to exist for the script to work. > In earlier udev versions I just added "sleep 20" to the script to be > sure that the device node exists. With the last version of udev this > seems to be no longer possiblee because udev waits for the hotplug > script to exit before creating the device node :( No, only PROGRAM and IMPORT runs before the node is created. > How can I make sure that the hotplug script is run after usblp is > loaded and after the device is created? RUN runs definitely after the node handling is finished. > Is there some hotplug-way to find out which device-node I am supposed > to load the firmware into? Don't understand the question. And what udev version is it? What does: cat /proc/sys/kernel/hotplug print? Kay ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel