From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kay Sievers Date: Sun, 04 Sep 2005 01:00:32 +0000 Subject: Re: 2.6.13 breaks udev rule Message-Id: <20050904010032.GA30467@vrfy.org> List-Id: References: <20050904003150.GA3958@branci40> In-Reply-To: <20050904003150.GA3958@branci40> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Sat, Sep 03, 2005 at 05:31:50PM -0700, Jim McCloskey wrote: > Hello. This simple rule for my Sandisk Minicruizer: > > BUS="usb", SYSFS{serial}="0000183546", NAME="%k", SYMLINK="sandisk" > > worked without problem under the 2.6.11 kernels, but ceased to work as > soon as I upgraded to 2.6.13. ... > SYSFS{scsi_level}="3" > SYSFS{state}="running" > SYSFS{timeout}="30" > SYSFS{type}="0" > SYSFS{vendor}="Generic " > > where the same command run under 2.6.11 yields much much more > information (all the `usb' bus sections). There shouldn't be a difference between these kernel versions. Are you sure that this happens for the _first_ connect after a reboot in both cases? 2.6.13 works without any problem for me. > This is udev 056 from Debian stable/testing (068 is in unstable). 056 is definitely too old for this kernel version. Kay ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel