From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Tue, 04 Oct 2005 21:56:14 +0000 Subject: Re: udev and parallel port support Message-Id: <20051004215614.GA17038@kroah.com> List-Id: References: <000101c5c83f$4c7184d0$3502a8c0@cisit.local> In-Reply-To: <000101c5c83f$4c7184d0$3502a8c0@cisit.local> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Tue, Oct 04, 2005 at 04:48:43PM -0500, Jason Dravet wrote: > > I am sorry I did not make my self clear. What I meant is that udev creates > the /dev/lp0, /dev/parport0, /dev/lp1, ..., /dev/parport3 nodes by looking > at /etc/udev/makedev.d/50-udev.nodes instead of actually detecting the > ports. In the 50-udev.nodes file it says "These device have to be created > manually" and proceeds to list several items include lp0. That sounds like a redhat specific change to udev, please take it up with them. > At least that is what happens in version 0.58. Does it make sense > now? There is no such thing as a udev release numbered 0.58, sorry :) thanks, greg k-h ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel