udevsend: main: error sending message: Connection refused

udevsend: main: error sending message: Connection refused

[Frédéric L. W. Meunier]

I installed udev 076 and got a bunch of these. After it booted, 
no devices for modules were created. Then, I ran 
/sbin/udevstart and thew were crated.

What may be wrong ? Could it be related to unix being a 
module and not built-in ? Using 2.6.14.

-- 
How to contact me - http://www.pervalidus.net/contact.html


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: udevsend: main: error sending message: Connection refused

[Marco d'Itri]

On Nov 25, "Frédéric L. W. Meunier" <2@pervalidus.net> wrote:

> What may be wrong ? Could it be related to unix being a 
> module and not built-in ? Using 2.6.14.
udevsend does not automatically start udevd anymore.

-- 
ciao,
Marco


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&opÌk
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: udevsend: main: error sending message: Connection refused

[Kay Sievers]

On Fri, Nov 25, 2005 at 02:55:11PM -0200, Frédéric L. W. Meunier wrote:
> I installed udev 076 and got a bunch of these. After it booted, 
> no devices for modules were created. Then, I ran 
> /sbin/udevstart and thew were crated.
> 
> What may be wrong ? Could it be related to unix being a 
> module and not built-in ? Using 2.6.14.

Did you read the last section in the RELEASE-NOTES for 076? If not, read
the first section of the README too. :)

Good luck,
Kay


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&opÌk
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: udevsend: main: error sending message: Connection refused

[Frédéric L. W. Meunier]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 784 bytes --]

On Fri, 25 Nov 2005, Kay Sievers wrote:

> On Fri, Nov 25, 2005 at 02:55:11PM -0200, Frédéric L. W. Meunier wrote:
>> I installed udev 076 and got a bunch of these. After it booted,
>> no devices for modules were created. Then, I ran
>> /sbin/udevstart and thew were crated.
>>
>> What may be wrong ? Could it be related to unix being a
>> module and not built-in ? Using 2.6.14.
>
> Did you read the last section in the RELEASE-NOTES for 076? If not, read
> the first section of the README too. :)

OK, I'll change CONFIG_UNIX next time.

But does the RELEASE-NOTES part mean the distributed start_udev 
(what I use) needs to be upgraded ? The only reference I see 
for udevd is 'udevd=/sbin/udevd'.

-- 
How to contact me - http://www.pervalidus.net/contact.html

Re: udevsend: main: error sending message: Connection refused

[Kay Sievers]

On Fri, Nov 25, 2005 at 03:12:46PM -0200, Frédéric L. W. Meunier wrote:
> On Fri, 25 Nov 2005, Kay Sievers wrote:
> 
> >On Fri, Nov 25, 2005 at 02:55:11PM -0200, Frédéric L. W. Meunier wrote:
> >>I installed udev 076 and got a bunch of these. After it booted,
> >>no devices for modules were created. Then, I ran
> >>/sbin/udevstart and thew were crated.
> >>
> >>What may be wrong ? Could it be related to unix being a
> >>module and not built-in ? Using 2.6.14.
> >
> >Did you read the last section in the RELEASE-NOTES for 076? If not, read
> >the first section of the README too. :)
> 
> OK, I'll change CONFIG_UNIX next time.

Socket as a module does not make sense, but it should work, if you have
module auto-loading.

> But does the RELEASE-NOTES part mean the distributed start_udev 
> (what I use) needs to be upgraded ?

Good point, I will just delete that silly thing. Seems I've missed it
with the recent removal of all the misleading stuff that is no longer
correct.

> The only reference I see 
> for udevd is 'udevd=/sbin/udevd'.

No, your init script, which depends on the distro how it must look
like, needs to start udevd --daemon. This will no longer happen magically
through udevsend. See this in the the README file:
  http://www.kernel.org/git/?p=linux/hotplug/udev.git;a=blob;hb=HEAD;f=README#l42

Kay


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&opÌk
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel